sprintf

(PHP 4, PHP 5, PHP 7)

sprintfReturn a formatted string

Descrierea

sprintf ( string $format , mixed ...$values ) : string

Returns a string produced according to the formatting string format.

Parametri

format

Șirul de formatare este compus din zero sau mai multe directive: caractere obișnuite (în afară de %), care sunt copiate direct în rezultat și specificatori de conversie, fiecare având parametrul său.

Un specificator de conversie e compus după următorul prototip: %[argnum$][flags][width][.precision]specifier.

Argnum

Un întreg urmat de senmul dolar $, pentru a specifica ce argument de număr trebuie tratat în conversie.

Flags
Flag Descriere
- Alinierea spre stânga în limitele lungimii câmpului; Implicit se efectuează alinierea spre dreapta
+ Prefixează numerele pozitive cu semnul plus +; implicit doar numerele negative sunt prefixate cu semnul minus.
(spațiu) Completează rezultatul cu spații. Acesta este comportamentul implicit.
0 Completează numerele cu zerouri în stânga. Cu specificatorii s se poate de completat cu zerouri și în dreapta.
'(char) Completează rezultatul cu caracterul (char).

Width

Un număr întreg ce indică câte caractere (minimum) trebuie să aibă rezultatul conversiei.

Precision

Un punct ., urmat de un număr întreg, însemnătatea căruia depinde de specificator:

  • Pentru specificatorii e, E, f și F: acesta este numărul de cifre ce vor fi tipărite după punctul zecimal (implicit acesta este 6).
  • Pentru specificatorii g și G: acesta este numărul maxim de cifre semnificative ce va fi tipărit.
  • Pentru specificatorul s: acesta funcționează ca punct de oprire, stabilind limita maximă a numărului de caractere din șir.

Notă: Dacă punctul este specificat fără o valoare explicită pentru precizie, se presupune că aceasta este 0.

Notă: Încercarea de a folosi un specificator de poziție mai mare decât PHP_INT_MAX va genera avertizări.

Specifiers
Specifier Descriere
% Specifică caracterul procent. Nu este necesar vre-un argument.
b Argumentul este tratat ca un întreg și prezentat ca număr binar.
c Argumentul este tratat ca un întreg și prezentat ca caracter cu acest cod ASCII.
d Argumentul este tratat ca un întreg și prezentat ca număr zecimal (cu semn).
e Argumentul este tratat ca număr în notație exponențială (de ex. 1.2e+2). Specificatorul de precizie semnifică numărul de cifre după virgulă începând cu PHP 5.2.1. În versiuni anterioare el specifica numărul de cifre semnificative (cu una mai puțin).
E La fel ca și specificatorul e, dar folosește caracterul majuscul (de ex. 1.2E+2).
f Argumentul este tratat ca număr cu virgulă și prezentat ca atare (în dependență de setările de localizare).
F Argumentul este tratat ca număr cu virgulă și prezentat ca atare (fără a se ține cont de setările de localizare). Disponibil începând cu PHP 5.0.3.
g

Format general.

Fie că P este egal cu precizia, dacă nu este zero, 6 dacă precizia este omisă, sau 1 dacă precizia este zero. Atunci dacă o conversie cu stilul E ar avea un exponent X:

Dacă P > X ≥ −4, atunci conversia este de stilul f și precizia P − (X + 1). În caz contrar, conversia este de stilul e și precizia P − 1.

G La fel ca și specificatorul g, dar utilizează E și f.
o Argumentul este tratat ca întreg și prezentat ca număr octal.
s Argumentul este tratat și prezentat ca șir de caractere.
u Argumentul este tratat ca întreg și prezentat ca număr zecimal fără semn.
x Argumentul este tratat ca întreg și prezentat ca număr hexazecimal (cu caractere minuscule).
X Argumentul este tratat ca întreg și prezentat ca număr hexazecimal (cu caractere majuscule).

Avertizare

Specificatorul de tip c ignoră completarea cu spații și lungimea

Avertizare

Încercarea de a folosi o combinație din specificatori de șiruri de caractere și lungime cu seturi de caractere ce necesită mai mult de un octet per caracter poate da rezultate imprevizibile

Variabilele vor fi aduse la un tip potrivit pentru specificatorul:

Manipularea tipurilor
Tipul Specificatorii
string s
integer d, u, c, o, x, X, b
double g, G, e, E, f, F

values

Valorile întoarse

Returns a string produced according to the formatting string format.

Istoricul schimbărilor

Versiune Descriere
8.0.0 This function no longer returns false on failure.

Exemple

Example #1 Argument swapping

The format string supports argument numbering/swapping.

<?php
$num 
5;
$location 'tree';

$format 'There are %d monkeys in the %s';
echo 
sprintf($format$num$location);
?>

Exemplul de mai sus va afișa:

There are 5 monkeys in the tree

However imagine we are creating a format string in a separate file, commonly because we would like to internationalize it and we rewrite it as:

<?php
$format 
'The %s contains %d monkeys';
echo 
sprintf($format$num$location);
?>

We now have a problem. The order of the placeholders in the format string does not match the order of the arguments in the code. We would like to leave the code as is and simply indicate in the format string which arguments the placeholders refer to. We would write the format string like this instead:

<?php
$format 
'The %2$s contains %1$d monkeys';
echo 
sprintf($format$num$location);
?>

An added benefit is that placeholders can be repeated without adding more arguments in the code.

<?php
$format 
'The %2$s contains %1$d monkeys.
           That\'s a nice %2$s full of %1$d monkeys.'
;
echo 
sprintf($format$num$location);
?>

When using argument swapping, the n$ position specifier must come immediately after the percent sign (%), before any other specifiers, as shown below.

Example #2 Specifying padding character

<?php
echo sprintf("%'.9d\n"123);
echo 
sprintf("%'.09d\n"123);
?>

Exemplul de mai sus va afișa:

......123
000000123

Example #3 Position specifier with other specifiers

<?php
$format 
'The %2$s contains %1$04d monkeys';
echo 
sprintf($format$num$location);
?>

Exemplul de mai sus va afișa:

The tree contains 0005 monkeys

Example #4 sprintf(): zero-padded integers

<?php
$isodate 
sprintf("%04d-%02d-%02d"$year$month$day);
?>

Example #5 sprintf(): formatting currency

<?php
$money1 
68.75;
$money2 54.35;
$money $money1 $money2;
echo 
$money;
echo 
"\n";
$formatted sprintf("%01.2f"$money);
echo 
$formatted;
?>

Exemplul de mai sus va afișa:

123.1
123.10

Example #6 sprintf(): scientific notation

<?php
$number 
362525200;

echo 
sprintf("%.3e"$number);
?>

Exemplul de mai sus va afișa:

3.625e+8

A se vedea și

  • printf() - Output a formatted string
  • fprintf() - Write a formatted string to a stream
  • vprintf() - Output a formatted string
  • vsprintf() - Return a formatted string
  • vfprintf() - Write a formatted string to a stream
  • sscanf() - Parses input from a string according to a format
  • fscanf() - Parses input from a file according to a format
  • number_format() - Format a number with grouped thousands
  • date() - Formatează o oră/dată

add a note add a note

User Contributed Notes 35 notes

up
69
remy dot damour at -please-no-spam-laposte dot net
15 years ago
With printf() and sprintf() functions, escape character is not backslash '\' but rather '%'.

Ie. to print '%' character you need to escape it with itself:
<?php
printf
('%%%s%%', 'koko'); #output: '%koko%'
?>
up
60
Alex R. Gibbs
11 years ago
1.  A plus sign ('+') means put a '+' before positive numbers while a minus sign ('-') means left justify.  The documentation incorrectly states that they are interchangeable.  They produce unique results that can be combined:

<?php
echo sprintf ("|%+4d|%+4d|\n",   1, -1);
echo
sprintf ("|%-4d|%-4d|\n",   1, -1);
echo
sprintf ("|%+-4d|%+-4d|\n", 1, -1);
?>

outputs:

|  +1|  -1|
|1   |-1  |
|+1  |-1  |

2.  Padding with a '0' is different than padding with other characters.  Zeros will only be added at the front of a number, after any sign.  Other characters will be added before the sign, or after the number:

<?php
echo sprintf ("|%04d|\n",   -2);
echo
sprintf ("|%':4d|\n",  -2);
echo
sprintf ("|%-':4d|\n", -2);

// Specifying both "-" and "0" creates a conflict with unexpected results:
echo sprintf ("|%-04d|\n",  -2);

// Padding with other digits behaves like other non-zero characters:
echo sprintf ("|%-'14d|\n", -2);
echo
sprintf ("|%-'04d|\n", -2);
?>

outputs:

|-002|
|::-2|
|-2::|
|-2  |
|-211|
|-2  |
up
3
Anderson
4 years ago
The old "monkey" example which helped me a lot has sadly disappeared.

I'll Re-post it in comment as a memory.

<?php
$n
43951789;
$u = -43951789;
$c = 65; // ASCII 65 is 'A'

// notice the double %%, this prints a literal '%' character
printf("%%b = '%b'\n", $n); // binary representation
printf("%%c = '%c'\n", $c); // print the ascii character, same as chr() function
printf("%%d = '%d'\n", $n); // standard integer representation
printf("%%e = '%e'\n", $n); // scientific notation
printf("%%u = '%u'\n", $n); // unsigned integer representation of a positive integer
printf("%%u = '%u'\n", $u); // unsigned integer representation of a negative integer
printf("%%f = '%f'\n", $n); // floating point representation
printf("%%o = '%o'\n", $n); // octal representation
printf("%%s = '%s'\n", $n); // string representation
printf("%%x = '%x'\n", $n); // hexadecimal representation (lower-case)
printf("%%X = '%X'\n", $n); // hexadecimal representation (upper-case)

printf("%%+d = '%+d'\n", $n); // sign specifier on a positive integer
printf("%%+d = '%+d'\n", $u); // sign specifier on a negative integer

/*
%b = '10100111101010011010101101'
%c = 'A'
%d = '43951789'
%e = '4.395179e+7'
%u = '43951789'
%u = '18446744073665599827'
%f = '43951789.000000'
%o = '247523255'
%s = '43951789'
%x = '29ea6ad'
%X = '29EA6AD'
%+d = '+43951789'
%+d = '-43951789'
*/

$s = 'monkey';
$t = 'many monkeys';

printf("[%s]\n",      $s); // standard string output
printf("[%10s]\n",    $s); // right-justification with spaces
printf("[%-10s]\n",   $s); // left-justification with spaces
printf("[%010s]\n",   $s); // zero-padding works on strings too
printf("[%'#10s]\n"$s); // use the custom padding character '#'
printf("[%10.10s]\n", $t); // left-justification but with a cutoff of 10 characters

/*
[monkey]
[    monkey]
[monkey    ]
[0000monkey]
[####monkey]
[many monke]
*/
?>
up
18
kontakt at myseosolution dot de
9 years ago
There are already some comments on using sprintf to force leading leading zeros but the examples only include integers. I needed leading zeros on floating point numbers and was surprised that it didn't work as expected.

Example:
<?php
sprintf
('%02d', 1);
?>

This will result in 01. However, trying the same for a float with precision doesn't work:

<?php
sprintf
('%02.2f', 1);
?>

Yields 1.00.

This threw me a little off. To get the desired result, one needs to add the precision (2) and the length of the decimal seperator "." (1). So the correct pattern would be

<?php
sprintf
('%05.2f', 1);
?>

Output: 01.00

Please see http://stackoverflow.com/a/28739819/413531 for a more detailed explanation.
up
13
timo dot frenay at gmail dot com
12 years ago
Here is how to print a floating point number with 16 significant digits regardless of magnitude:

<?php
    $result
= sprintf(sprintf('%%.%dF', max(15 - floor(log10($value)), 0)), $value);
?>

This works more reliably than doing something like sprintf('%.15F', $value) as the latter may cut off significant digits for very small numbers, or prints bogus digits (meaning extra digits beyond what can reliably be represented in a floating point number) for very large numbers.
up
9
splogamurugan at gmail dot com
15 years ago
$format = 'There are %1$d monkeys in the %s and %s ';
printf($format, 100, 'Chennai', 'Bangalore');

Expecting to output
"There are 100 monkeys in the Chennai and bangalore"

But, this will output
"There are 100 monkeys in the 100 and Chennai"

Because, the second and Third specifiers takes 1rst and 2nd arguments. Because it is not assigned with any arguments.
up
7
no dot email dot address at example dot com
21 years ago
Using argument swapping in sprintf() with gettext: Let's say you've written the following script:

<?php
$var
= sprintf(gettext("The %2\$s contains %1\$d monkeys"), 2, "cage");
?>

Now you run xgettext in order to generate a .po file. The .po file will then look like this:

#: file.php:9
#, ycp-format
msgid "The %2\\$s contains %1\\$d monkeys"
msgstr ""

Notice how an extra backslash has been added by xgettext.

Once you've translated the string, you must remove all backslashes from the ID string as well as the translation, so the po file will look like this:

#: file.php:9
#, ycp-format
msgid "The %2$s contains %1$d monkeys"
msgstr "Der er %1$d aber i %2$s"

Now run msgfmt to generate the .mo file, restart Apache to remove the gettext cache if necessary, and you're off.
up
10
dwieeb at gmail dot com
13 years ago
If you use the default padding specifier (a space) and then print it to HTML, you will notice that HTML does not display the multiple spaces correctly. This is because any sequence of white-space is treated as a single space.

To overcome this, I wrote a simple function that replaces all the spaces in the string returned by sprintf() with the character entity reference "&nbsp;" to achieve non-breaking space in strings returned by sprintf()

<?php
//Here is the function:
function sprintf_nbsp() {
  
$args = func_get_args();
   return
str_replace(' ', '&nbsp;', vsprintf(array_shift($args), array_values($args)));
}

//Usage (exactly like sprintf):
$format = 'The %d monkeys are attacking the [%10s]!';
$str = sprintf_nbsp($format, 15, 'zoo');
echo
$str;
?>

The above example will output:
The 15 monkeys are attacking the [       zoo]!

<?php
//The variation that prints the string instead of returning it:
function printf_nbsp() {
  
$args = func_get_args();
   echo
str_replace(' ', '&nbsp;', vsprintf(array_shift($args), array_values($args)));
}
?>
up
10
php at sharpdreams dot com
19 years ago
Note that when using the argument swapping, you MUST number every argument, otherwise sprintf gets confused. This only happens if you use number arguments first, then switch to a non-numbered, and then back to a numbered one.

<?php
$sql
= sprintf( "select * from %1\$s left join %2\$s on( %1\$s.id = %2\$s.midpoint ) where %1\$s.name like '%%%s%%' and %2\$s.tagname is not null", "table1", "table2", "bob" );
// Wont work:
// Sprintf will complain about not enough arguments.
$sql = sprintf( "select * from %1\$s left join %2\$s on( %1\$s.id = %2\$s.midpoint ) where %1\$s.name like '%%%3\$s%%' and %2\$s.tagname is not null", "table1", "table2", "bob" );
// Will work: note the %3\$s
?>
up
10
jfgrissom at gmail dot com
14 years ago
I had a nightmare trying to find the two's complement of a 32 bit number.

I got this from http://www.webmasterworld.com/forum88/13334.htm (credit where credit is due... =P  )

Quote: ...find out the 2's complement of any number, which is -(pow(2, n) - N) where n is the number of bits and N is the number for which to find out its 2's complement.

This worked magic for me... previously I was trying to use

sprintf ("%b",$32BitDecimal);
But it always returned 10000000000000000000000 when the $32BitDecimal value got above 2,000,000,000.

This -(pow(2, n) - N)
Worked remarkably well and was very accurate.

Hope this helps someone fighting with two's complement in PHP.
up
9
viktor at textalk dot com
15 years ago
A more complete and working version of mb_sprintf and mb_vsprintf. It should work with any "ASCII preserving" encoding such as UTF-8 and all the ISO-8859 charsets. It handles sign, padding, alignment, width and precision. Argument swapping is not handled.

<?php
if (!function_exists('mb_sprintf')) {
  function
mb_sprintf($format) {
     
$argv = func_get_args() ;
     
array_shift($argv) ;
      return
mb_vsprintf($format, $argv) ;
  }
}
if (!
function_exists('mb_vsprintf')) {
 
/**
   * Works with all encodings in format and arguments.
   * Supported: Sign, padding, alignment, width and precision.
   * Not supported: Argument swapping.
   */
 
function mb_vsprintf($format, $argv, $encoding=null) {
      if (
is_null($encoding))
         
$encoding = mb_internal_encoding();

     
// Use UTF-8 in the format so we can use the u flag in preg_split
     
$format = mb_convert_encoding($format, 'UTF-8', $encoding);

     
$newformat = ""; // build a new format in UTF-8
     
$newargv = array(); // unhandled args in unchanged encoding

     
while ($format !== "") {
     
       
// Split the format in two parts: $pre and $post by the first %-directive
        // We get also the matched groups
       
list ($pre, $sign, $filler, $align, $size, $precision, $type, $post) =
           
preg_split("!\%(\+?)('.|[0 ]|)(-?)([1-9][0-9]*|)(\.[1-9][0-9]*|)([%a-zA-Z])!u",
                      
$format, 2, PREG_SPLIT_DELIM_CAPTURE) ;

       
$newformat .= mb_convert_encoding($pre, $encoding, 'UTF-8');
       
        if (
$type == '') {
         
// didn't match. do nothing. this is the last iteration.
       
}
        elseif (
$type == '%') {
         
// an escaped %
         
$newformat .= '%%';
        }
        elseif (
$type == 's') {
         
$arg = array_shift($argv);
         
$arg = mb_convert_encoding($arg, 'UTF-8', $encoding);
         
$padding_pre = '';
         
$padding_post = '';
         
         
// truncate $arg
         
if ($precision !== '') {
           
$precision = intval(substr($precision,1));
            if (
$precision > 0 && mb_strlen($arg,$encoding) > $precision)
             
$arg = mb_substr($precision,0,$precision,$encoding);
          }
         
         
// define padding
         
if ($size > 0) {
           
$arglen = mb_strlen($arg, $encoding);
            if (
$arglen < $size) {
              if(
$filler==='')
                 
$filler = ' ';
              if (
$align == '-')
                 
$padding_post = str_repeat($filler, $size - $arglen);
              else
                 
$padding_pre = str_repeat($filler, $size - $arglen);
            }
          }
         
         
// escape % and pass it forward
         
$newformat .= $padding_pre . str_replace('%', '%%', $arg) . $padding_post;
        }
        else {
         
// another type, pass forward
         
$newformat .= "%$sign$filler$align$size$precision$type";
         
$newargv[] = array_shift($argv);
        }
       
$format = strval($post);
      }
     
// Convert new format back from UTF-8 to the original encoding
     
$newformat = mb_convert_encoding($newformat, $encoding, 'UTF-8');
      return
vsprintf($newformat, $newargv);
  }
}
?>
up
9
Pacogliss
18 years ago
Just a reminder for beginners : example 6 'printf("[%10s]\n",    $s);' only works (that is, shows out the spaces) if you put the html '<pre></pre>' tags ( head-scraping time saver ;-).
up
4
abiltcliffe at bigfoot.com
21 years ago
To jrust at rustyparts.com, note that if you're using a double-quoted string and *don't* escape the dollar sign with a backslash, $s and $d will be interpreted as variable references. The backslash isn't part of the format specifier itself but you do need to include it when you write the format string (unless you use single quotes).
up
6
Hayley Watson
11 years ago
If you use argument numbering, then format specifications with the same number get the same argument; this can save repeating the argument in the function call.

<?php

$pattern
= '%1$s %1$\'#10s %1$s!';

printf($pattern, "badgers");
?>
up
1
Nathan Alan
7 years ago
Just wanted to add that to get the remaining text from the string, you need to add the following as a variable in your scanf

%[ -~]

Example:

sscanf($sql, "[%d,%d]%[ -~]", $sheet_id, $column, $remaining_sql);
up
5
john at jbwalker dot com
9 years ago
I couldn't find what should be a WARNING in the documentation above, that if you have more specifiers than variables to match them sprintf returns NOTHING. This fact, IMHO, should also be noted under return values.
up
2
nmmm at nmmm dot nu
8 years ago
php printf and sprintf not seems to support star "*" formatting.

here is an example:

printf("%*d\n",3,5);

this will print just "d" instead of "<two spaces>5"
up
3
ian dot w dot davis at gmail dot com
18 years ago
Just to elaborate on downright's point about different meanings for %f, it appears the behavior changed significantly as of 4.3.7, rather than just being different on different platforms. Previously, the width specifier gave the number of characters allowed BEFORE the decimal. Now, the width specifier gives the TOTAL number of characters. (This is in line with the semantics of printf() in other languages.) See bugs #28633 and #29286 for more details.
up
3
carmageddon at gmail dot com
13 years ago
If you want to convert a decimal (integer) number into constant length binary number in lets say 9 bits, use this:

$binary = sprintf('%08b', $number );

for example:
<?php
$bin
= sprintf('%08b',511 );
echo
$bin."\n";
?>

would output 111111111
And 2 would output 00000010

I know the leading zeros are useful to me, perhaps they are to someone else too.
up
4
nate at frickenate dot com
14 years ago
Here's a clean, working version of functions to allow using named arguments instead of numeric ones. ex: instead of sprintf('%1$s', 'Joe');, we can use sprintf('%name$s', array('name' => 'Joe'));. I've provided 2 different versions: the first uses the php-like syntax (ex: %name$s), while the second uses the python syntax (ex: %(name)s).

<?php

/**
* version of sprintf for cases where named arguments are desired (php syntax)
*
* with sprintf: sprintf('second: %2$s ; first: %1$s', '1st', '2nd');
*
* with sprintfn: sprintfn('second: %second$s ; first: %first$s', array(
*  'first' => '1st',
*  'second'=> '2nd'
* ));
*
* @param string $format sprintf format string, with any number of named arguments
* @param array $args array of [ 'arg_name' => 'arg value', ... ] replacements to be made
* @return string|false result of sprintf call, or bool false on error
*/
function sprintfn ($format, array $args = array()) {
   
// map of argument names to their corresponding sprintf numeric argument value
   
$arg_nums = array_slice(array_flip(array_keys(array(0 => 0) + $args)), 1);

   
// find the next named argument. each search starts at the end of the previous replacement.
   
for ($pos = 0; preg_match('/(?<=%)([a-zA-Z_]\w*)(?=\$)/', $format, $match, PREG_OFFSET_CAPTURE, $pos);) {
       
$arg_pos = $match[0][1];
       
$arg_len = strlen($match[0][0]);
       
$arg_key = $match[1][0];

       
// programmer did not supply a value for the named argument found in the format string
       
if (! array_key_exists($arg_key, $arg_nums)) {
           
user_error("sprintfn(): Missing argument '${arg_key}'", E_USER_WARNING);
            return
false;
        }

       
// replace the named argument with the corresponding numeric one
       
$format = substr_replace($format, $replace = $arg_nums[$arg_key], $arg_pos, $arg_len);
       
$pos = $arg_pos + strlen($replace); // skip to end of replacement for next iteration
   
}

    return
vsprintf($format, array_values($args));
}

/**
* version of sprintf for cases where named arguments are desired (python syntax)
*
* with sprintf: sprintf('second: %2$s ; first: %1$s', '1st', '2nd');
*
* with sprintfn: sprintfn('second: %(second)s ; first: %(first)s', array(
*  'first' => '1st',
*  'second'=> '2nd'
* ));
*
* @param string $format sprintf format string, with any number of named arguments
* @param array $args array of [ 'arg_name' => 'arg value', ... ] replacements to be made
* @return string|false result of sprintf call, or bool false on error
*/
function sprintfn ($format, array $args = array()) {
   
// map of argument names to their corresponding sprintf numeric argument value
   
$arg_nums = array_slice(array_flip(array_keys(array(0 => 0) + $args)), 1);

   
// find the next named argument. each search starts at the end of the previous replacement.
   
for ($pos = 0; preg_match('/(?<=%)\(([a-zA-Z_]\w*)\)/', $format, $match, PREG_OFFSET_CAPTURE, $pos);) {
       
$arg_pos = $match[0][1];
       
$arg_len = strlen($match[0][0]);
       
$arg_key = $match[1][0];

       
// programmer did not supply a value for the named argument found in the format string
       
if (! array_key_exists($arg_key, $arg_nums)) {
           
user_error("sprintfn(): Missing argument '${arg_key}'", E_USER_WARNING);
            return
false;
        }

       
// replace the named argument with the corresponding numeric one
       
$format = substr_replace($format, $replace = $arg_nums[$arg_key] . '$', $arg_pos, $arg_len);
       
$pos = $arg_pos + strlen($replace); // skip to end of replacement for next iteration
   
}

    return
vsprintf($format, array_values($args));
}

?>
up
2
php at mikeboers dot com
15 years ago
And continuing on the same theme of a key-based sprintf...

I'm roughly (I can see a couple cases where it comes out wierd) copying the syntax of Python's string formatting with a dictionary. The improvement over the several past attempts is that this one still respects all of the formating options, as you can see in my example.

And the error handling is really crappy (just an echo). I just threw this together so do with it what you will. =]

<?php

function sprintf_array($string, $array)
{
   
$keys    = array_keys($array);
   
$keysmap = array_flip($keys);
   
$values  = array_values($array);
   
    while (
preg_match('/%\(([a-zA-Z0-9_ -]+)\)/', $string, $m))
    {   
        if (!isset(
$keysmap[$m[1]]))
        {
            echo
"No key $m[1]\n";
            return
false;
        }
       
       
$string = str_replace($m[0], '%' . ($keysmap[$m[1]] + 1) . '$', $string);
    }
   
   
array_unshift($values, $string);
   
var_dump($values);
    return
call_user_func_array('sprintf', $values);
}

echo
sprintf_array('4 digit padded number: %(num)04d ', array('num' => 42));

?>

Cheers!
up
2
hdimac at gmail dot com
9 years ago
In the examples, is being shown printf, but it should say sprintf, which is the function being explained... just a simple edition mistake.
up
2
krzysiek dot 333 at gmail dot com - zryty dot hekko dot pl
12 years ago
Encoding and decoding IP adress to format: 1A2B3C4D (mysql column: char(8) )

<?php
function encode_ip($dotquad_ip)
{
   
$ip_sep = explode('.', $dotquad_ip);
    return
sprintf('%02x%02x%02x%02x', $ip_sep[0], $ip_sep[1], $ip_sep[2], $ip_sep[3]);
}

function
decode_ip($int_ip)
{
   
$hexipbang = explode('.', chunk_split($int_ip, 2, '.'));
    return
hexdec($hexipbang[0]). '.' . hexdec($hexipbang[1]) . '.' . hexdec($hexipbang[2]) . '.' . hexdec($hexipbang[3]);
}
?>
up
2
Andrew dot Wright at spamsux dot atnf dot csiro dot au
21 years ago
An error in my last example:
$b = sprintf("%30.s", $a);
will only add enough spaces before $a to pad the spaces + strlen($a) to 30 places.

My method of centering fixed text in a 72 character width space is:

$a = "Some string here";
$lwidth = 36; // 72/2
$b = sprintf("%".($lwidth + round(strlen($a)/2)).".s", $a);
up
1
geertdd at gmail dot com
13 years ago
Note that when using a sign specifier, the number zero is considered positive and a "+" sign will be prepended to it.

<?php
printf
('%+d', 0); // +0
?>
up
2
John Walker
14 years ago
To add to other notes below about floating point problems, I noted that %f and %F will apparently output a maximum precision of 6 as a default so you have to specify 1.15f (eg) if you need more.

In my case, the input (from MySQL) was a string with 15 digits of precision that was displayed with 6. Likely what happens is that the rounding occurs in the conversion to a float before it is displayed. Displaying it as 1.15f (or in my case, %s) shows the correct number.
up
1
Astone
14 years ago
When you're using Google translator, you have to 'escape' the 'conversion specifications' by putting <span class="notranslate"></span> around them.

Like this:

<?php

function getGoogleTranslation($sString, $bEscapeParams = true)
{
   
// "escape" sprintf paramerters
   
if ($bEscapeParams)
    {
       
$sPatern = '/(?:%%|%(?:[0-9]+\$)?[+-]?(?:[ 0]|\'.)?-?[0-9]*(?:\.[0-9]+)?[bcdeufFosxX])/';       
       
$sEscapeString = '<span class="notranslate">$0</span>';
       
$sString = preg_replace($sPatern, $sEscapeString, $sString);
    }

   
// Compose data array (English to Dutch)
   
$aData = array(
       
'v'            => '1.0',
       
'q'            => $sString,
       
'langpair'    => 'en|nl',
    );

   
// Initialize connection
   
$rService = curl_init();
   
   
// Connection settings
   
curl_setopt($rService, CURLOPT_URL, 'http://ajax.googleapis.com/ajax/services/language/translate');
   
curl_setopt($rService, CURLOPT_RETURNTRANSFER, true);
   
curl_setopt($rService, CURLOPT_POSTFIELDS, $aData);
   
   
// Execute request
   
$sResponse = curl_exec($rService);

   
// Close connection
   
curl_close($rService);
   
   
// Extract text from JSON response
   
$oResponse = json_decode($sResponse);
    if (isset(
$oResponse->responseData->translatedText))
    {
       
$sTranslation = $oResponse->responseData->translatedText;
    }
    else
    {
       
// If some error occured, use the original string
       
$sTranslation = $sString;
    }
   
   
// Replace "notranslate" tags
   
if ($bEscapeParams)
    {
       
$sEscapePatern = '/<span class="notranslate">([^<]*)<\/span>/';
       
$sTranslation = preg_replace($sEscapePatern, '$1', $sTranslation);
    }
   
   
// Return result
   
return $sTranslation;
}

?>

Thanks to MelTraX for defining the RegExp!
up
1
ignat dot scheglovskiy at gmail dot com
11 years ago
Here is an example how alignment, padding and precision specifier can be used to print formatted list of items:

<?php

$out
= "The Books\n";
$books = array("Book 1", "Book 2", "Book 3");
$pages = array("123 pages ", "234 pages", "345 pages");
for (
$i = 0; $i < count($books); $i++) {
   
$out .= sprintf("%'.-20s%'.7.4s\n", $books[$i], $pages[$i]);
}
echo
$out;

// Outputs:
//
// The Books
// Book 1.................123
// Book 2.................234
// Book 3.................345
?>
up
1
scott dot gardner at mac dot com
16 years ago
In the last example of Example#6, there is an error regarding the output.

printf("[%10.10s]\n", $t); // left-justification but with a cutoff of 10 characters

This outputs right-justified.

In order to output left-justified:

printf("[%-10.10s]\n", $t);
up
1
jrpozo at conclase dot net
19 years ago
Be careful if you use the %f modifier to round decimal numbers as it (starting from 4.3.10) will no longer produce a float number if you set certain locales, so you can't accumulate the result. For example:

setlocale(LC_ALL, 'es_ES');
echo(sprintf("%.2f", 13.332) + sprintf("%.2f", 14.446))

gives 27 instead of 27.78, so use %F instead.
up
2
Anonymous
7 years ago
Be cafeful while trying to refactor longer strings with repeated placeholders like

    sprintf("Hi %s. Your name is %s", $name, $name);

to use argument numbering:

   sprintf("Hi %1$s. Your name is %1$s", $name);

This will nuke you at **runtime**, because of `$s` thing being handled as variable. If you got no $s for substitution, notice will be thrown.

The solution is to use single quotes to prevent variable substitution in string:

   sprintf('Hi %1$s. Your name is %1$s', $name);

If you need variable substitution, then you'd need to split your string to keep it in single quotes:

   sprintf("Hi " . '%1$s' . ". Your {$variable} is " . '%1$s', $name);
up
0
Sam Bull
8 years ago
Fix for sprintfn function for named arguments (http://php.net/manual/en/function.sprintf.php#94608):

Change the first line from:
  $arg_nums = array_slice(array_flip(array_keys(array(0 => 0) + $args)), 1);
to:
  $arg_nums = array_keys($args);
  array_unshift($arg_nums, 0);
  $arg_nums = array_flip(array_slice($arg_nums, 1, NULL, true));
up
0
ivan at php dot net
10 years ago
There is a minor issue in a code of mb_vsprintf function from viktor at textalk dot com.

In "truncate $arg" section the following line:
  $arg = mb_substr($precision,0,$precision,$encoding);
needs to be replaced with:
  $arg = mb_substr($arg,0,$precision,$encoding);
up
-2
Mirek Z...
4 years ago
I've performed a simple speed test. sprintf against PHP string concatenation operator. Test was performed on PHP 7.3 for 1 million interations.

I run this several times and what I've noted that string concatenation took about 2.9 seconds, sprintf took 4.3 seconds.
I was thinking about what is faster, what is better to do when we're going to format our string (for example, the message to the user or for log purposes) containing some variables values. Is it better to concatenate string with variables using operator (dot ".") or to use sprintf. The answer is: when you do not plan to implement any multilanguage mechanisms and feel good with hardcoding some texts, the "dot" is almost 1.5 times faster!

Here's the code:

echo 'Start' . PHP_EOL;
$vS_text = 'some text';
$vS = '';
$vf = microtime(true);
for ($vI = 0; $vI < 1000000; $vI++) {
    $vS = 'Start ' . $vI . ' ' . $vS_text . ' ' . $vf . ' end';
}
$vf = microtime(true) - $vf;
echo 'Concat:' . $vf . PHP_EOL;
$vS = '';
$vf = microtime(true);
for ($vI = 0; $vI < 1000000; $vI++) {
    $vS = sprintf('Start %d %s %f end', $vI, $vS_text, $vf);
}
$vf = microtime(true) - $vf;
echo 'Spritf:' . $vf . PHP_EOL;
up
-6
Anonymous
5 years ago
I have written a wrapper for sprintf. Add a new %S  (upper case s) where the number indicates the number of characters and not bytes.
This is useful for formatting utf-8 strings.

<?php
function SacSprintf( $format) {
       
$argv = func_get_args() ;
       
array_shift($argv) ;

       
$offset = 0;
       
$i = 0;
        while(
preg_match("^A%[+-]*[.]*([0-9.]*)([a-z])^Ai", $format, $match, PREG_OFFSET_CAPTURE, $offset)) {
                if(
$match[2][0] == 'S') {
                        if(
$match[1][0] != '') {
                               
$t1 = explode('.', $match[1][0]);
                               
$t1[0] = intval($t1[0]) + strlen($argv[$i]) - strlen(utf8_decode($argv[$i]));
                               
$l1 = strlen($match[1][0]);
                               
$t2 = implode('.', $t1);
                               
$l2 = strlen($t2) - $l1;
                               
$format = substr_replace( $format, $t2, $match[1][1], strlen($match[1][0]));
                               
$offset += $l2;
                               
$match[2][1] += $l2;
                        }   
                       
$format[$match[2][1]] = 's';
                }   
               
$offset += $match[2][1];
               
$i++;
        }   
        return
vsprintf($format, $argv) ;
}

echo
"<pre>\n";
echo
"      1234567890123456789012345678901234567890\n";
echo
sprintf("Hola, %-20s is my name\n", "José Luis jiménez");
echo
SacSprintf("Hola, %-20S is my name\n", "José Luis jiménez");
echo
"</pre>\n";
?>

The output will be:
      1234567890123456789012345678901234567890
Hola, José Luis jiménez  is my name
Hola, José Luis jiménez    is my name
To Top