prev
foreach(range()) whilst efficiant in other languages, such as python, it is not (compared to a for) in php*.
php is a C-inspired language and thus for is entirely in-keeping with the lanuage aethetic to use it
<?php
//efficiant
for($i = $start; $i < $end; $i+=$step)
{
//do something with array
}
//inefficiant
foreach(range($start, $end, $step) as $i)
{
//do something with array
}
?>
That the officiant documentation doesnt mention the for loop is strange.
Note however, that in PHP5 foreach is faster than for when iterating without incrementing a variable.
* My tests using microtime and 100 000 iterations consistently (~10 times) show that for is 4x faster than foreach(range()).
range
(PHP 4, PHP 5)
range — Crea un array contenente una serie di elementi
Descrizione
array range
( int
$min
, int $max
[, int $step
] )
range() restituisce una serie di elementi da
min a max,
inclusiva. Se min > max, la sequenza sarà decrescente.
Nota: Nuovo parametro
Il parametro opzionalestepè stato aggiunto nel PHP 5.0.0.
Se il valore step è specificato, verrà utilizzato come
incremento tra gli elementi della sequenza. step
deve essere un numero positivo. Se non specificato,
il valore predefinito per step è 1.
Example #1 esempi di range()
<?php
// array(0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12)
foreach (range(0, 12) as $numero) {
echo $numero;
}
// Il parametro step è stato introdotto nel PHP 5.0.0
// array(0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100)
foreach (range(0, 100, 10) as $numero) {
echo $numero;
}
// L'utilizzo dei caratteri è stato aggiunto nel PHP 4.1.0
// array('a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i');
foreach (range('a', 'i') as $lettera) {
echo $lettera;
}
// array('c', 'b', 'a');
foreach (range('c', 'a') as $lettera) {
echo $lettera;
}
?>
Nota:
Prima della versione 4.1.0 la funzione range() generava solo array crescenti di interi. Il supporto per le sequenze di caratteri e array decrescenti è stata aggiunta nella 4.1.0. I valori delle sequenze di caratteri sono limitati alla lunghezza di 1 carattere. Se viene inserito un valore con una lunghezza maggiore, viene utilizzato solo il primo carattere.
Attenzione
Nel PHP dalla versione 4.1.0 alla 4.3.2, range() vede le stringhe numeriche come stringhe e non come interi. Quindi, verranno utilizzate come sequenze di caratteri. Per esempio, "4242" viene trattato come "4".
Vedere shuffle(), array_fill() e foreach.
add a note
User Contributed Notes
range - [20 notes]
ThinkMedical at Gmail dot com ¶
4 years ago
captvanhalen at gmail dot com ¶
5 years ago
Here is a home rolled range() function that uses the step feature for those unfortunate souls who cannot use PHP5:
<?php
function my_range( $start, $end, $step = 1) {
$range = array();
foreach (range( $start, $end ) as $index) {
if (! (($index - $start) % $step) ) {
$range[] = $index;
}
}
return $range;
}
?>
manuel at levante dot de ¶
6 years ago
<?php
function srange ($s) {
preg_match_all("/([0-9]{1,2})-?([0-9]{0,2}) ?,?;?/", $s, $a);
$n = array ();
foreach ($a[1] as $k => $v) {
$n = array_merge ($n, range ($v, (empty($a[2][$k])?$v:$a[2][$k])));
}
return ($n);
}
$s = '1-4 6-7 9-10';
print_r(srange($s));
?>
Return:
Array
(
[0] => 1
[1] => 2
[2] => 3
[3] => 4
[4] => 6
[5] => 7
[6] => 9
[7] => 10
)
Palz ¶
6 months ago
To create a range array like
Array
(
[11] => 1
[12] => 2
[13] => 3
[14] => 4
)
combine two range arrays using array_combine:
array_combine(range(11,14),range(1,4))
chris at laflash dot org ¶
6 years ago
Quick HTML menus with minimum and maximum sets of years:
<?php
/*
** Quick HTML menus with minimum and maximum sets of years.
** @author Chris Charlton <chris@laflash.org>
** @license FREE!
*/
// Years range setup
$year_built_min = 1900;
$year_built_max = date("Y");
?>
<select id="yearBuiltMin" size="1">
<?php // Generate minimum years
foreach (range($year_built_min, $year_built_max) as $year) { ?>
<option value="<?php echo($year); ?>"><?php echo($year); ?></option>
<?php } ?>
</select>
<select id="yearBuiltMax" size="1">
<?php // Generate max years
foreach (range($year_built_max, $year_built_min) as $year) { ?>
<option value="<?php echo($year); ?>"><?php echo($year); ?></option>
<?php } ?>
</select>
subscription101 at hotmail dot com ¶
7 years ago
A much simpler way of creating a range of even numbers is by starting with an even number:
<?php
range(2, 10, 2);
?>
me at phpscott dot com ¶
1 year ago
So, I needed a quick and dirty way to create a dropdown select for hours, minutes and seconds using 2 digit formatting, and to create those arrays of data, I combined range with array merge..
<?php
$prepend = array('00','01','02','03','04','05','06','07','08','09');
$hours = array_merge($prepend,range(10, 23));
$minutes = array_merge($prepend,range(10, 59));
$seconds = $minutes;
?>
Super simple.
dries at volta dot be ¶
1 year ago
Ever wanted to generate an array with a range of column names for use in Excel file related parsing?
I've wrote a function that starts at the A column and adds column names up until the column you specified.
<?php
/**
* This function creates an array with column names up until the column
* you specified.
*/
function createColumnsArray($end_column, $first_letters = '')
{
$columns = array();
$length = strlen($end_column);
$letters = range('A', 'Z');
// Iterate over 26 letters.
foreach ($letters as $letter) {
// Paste the $first_letters before the next.
$column = $first_letters . $letter;
// Add the column to the final array.
$columns[] = $column;
// If it was the end column that was added, return the columns.
if ($column == $end_column)
return $columns;
}
// Add the column children.
foreach ($columns as $column) {
// Don't itterate if the $end_column was already set in a previous itteration.
// Stop iterating if you've reached the maximum character length.
if (!in_array($end_column, $columns) && strlen($column) < $length) {
$new_columns = createColumnsArray($end_column, $column);
// Merge the new columns which were created with the final columns array.
$columns = array_merge($columns, $new_columns);
}
}
return $columns;
}
?>
Usage:
<?php
// Return an array with all column names from A until and with BI.
createColumnsArray('BI');
?>
m0sh3 at hotmail dot com ¶
6 years ago
Here's how i use it to check if array is associative or not:
<?php
if (array_keys($arr)===range(0, sizeof($arr)-1)) {
// not associative array
} else {
// associative array
}
?>
ktamas77 at gmail dot com ¶
9 months ago
if you need zero padding, string prefixes or any other masks, then a simple combination of array_map, inline functions and sprintf is your friend.
<?php
$a = array_map(function($n) { return sprintf('sample_%03d', $n); }, range(50, 59) );
print_r($a);
?>
Will result:
Array
(
[0] => sample_050
[1] => sample_051
[2] => sample_052
[3] => sample_053
[4] => sample_054
[5] => sample_055
[6] => sample_056
[7] => sample_057
[8] => sample_058
[9] => sample_059
)
emory underscore smith at hotmail ¶
7 years ago
since its not stated explicitly above, thought id point out that you arent limited to using integers.
however, be careful when doing so, as you might not get the range you expect!
to illustrate:
<?php
$am = range(500,1600,10);
$fm = range(88.1,107.9,.2);
print_r($am);
print_r($fm);
?>
print_r($am) yields the expected result:
Array
(
[0] => 500
[1] => 510
[2] => 520
...
[109] => 1590
[110] => 1600
)
print_r($fm), however, falls a bit (1%) short:
Array
(
[0] => 88.1
[1] => 88.3
[2] => 88.5
...
[97] => 107.5
[98] => 107.7
)
so, if you want to use a non-integral step size params for numeric ranges, be sure to account for fp representation accuracy and error accumulation; a step size of something like pi or 1/10 could spell disaster for a large range. if in doubt, use integral steps and divide ... something like <?php range(88.1,108,.2) ?> might work to recover 107.9, but would not be scalable like, say <?php array_map(create_function('$x','return $x/10;'),range(881,1079,2)) ?>.
-emory
derek at php dot net ¶
8 years ago
This should emulate range() a little better.
<?php
function range_wroar($low, $high, $step = 1) {
$arr = array();
$step = (abs($step)>0)?abs($step):1;
$sign = ($low<=$high)?1:-1;
if(is_numeric($low) && is_numeric($high)) {
//numeric sequence
for ($i = (float)$low; $i*$sign <= $high*$sign; $i += $step*$sign)
$arr[] = $i;
} else {
//character sequence
if (is_numeric($low))
return $this->range($low, 0, $step);
if (is_numeric($high))
return $this->range(0, $high, $step);
$low = ord($low);
$high = ord($high);
for ($i = $low; $i*$sign <= $high*$sign; $i += $step*$sign) {
$arr[] = chr($i);
}
}
return $arr;
}
?>
j dot gizmo at aon dot at ¶
8 years ago
i figured i'd add some more functionality to the myRange() functions below.
now you can, besides giving a $step parameter,
1. count backwards
2. count with letters
3. give whatever parameter you want, there's nothing (i know of) that will cause an endless loop (try a negative $step for the previous function....)
<?php
function myRange($num1, $num2, $step=1)
{
if (is_numeric($num1) && is_numeric($num2))
{
//we have a numeric range
$step = ( abs($step)>0 ? abs($step) : 1 ); //make $step positive
$dir = ($num1<=$num2 ? 1 : -1); //get the direction
for($i = (float)$num1; $i*$dir <= $num2*$dir; $i += $step*$dir)
{
$temp[] = $i;
}
}
else
{
//we have a character range
$num1=ord((string)$num1); //convert to ascii value
$num2=ord((string)$num2);
$step = ( abs($step)>0 ? abs($step) : 1 ); //make $step positive
$dir = ($num1<=$num2 ? 1 : -1); //get direction
for($i = $num1; $i*$dir <= $num2*$dir; $i += $step*$dir)
{
$temp[] = chr($i);
}
}
return $temp;
}
print_r(myRange( 1, 3, 0.5 )); //you can use fractional steps
print_r(myRange( "a", "k", 3 )); //or count letters
print_r(myRange( "5", "9" )); //numbers are detected even if hidden in strtings
print_r(myRange( "!", "%", 1/pi() )); //or mess around with senseless parameters
?>
Aram Kocharyan ¶
2 years ago
Here's a function to generate ranges from strings:
<?php
/* Creates an array of integers based on a given range string of format "int - int"
Eg. range_str('2 - 5'); */
function range_str($str) {
preg_match('#(\\d+)\\s*-\\s*(\\d+)#', $str, $matches);
if ( count($matches) == 3 ) {
return range($matches[1], $matches[2]);
}
return FALSE;
}
// Test
$array = range_str(' 2 - 4 ');
print_r($array);
?>
This outputs:
Array
(
[0] => 2
[1] => 3
[2] => 4
)
gtisza at gmail dot com ¶
28 days ago
You might expect range($n, $n-1) to be an empty array (as in e.g. Python) but actually PHP will assume a step of -1 if start is larger than end.
Sysix ¶
2 months ago
for is better than range:
<?php
$time_start = microtime(true);
foreach(range(1, 50000) as $val) {
echo $val.',';
}
$time_end = microtime(true);
$time = $time_end - $time_start;
echo '<br /><br />'.$time.'<br /> <br />';
$time_start = microtime(true);
for($i = 1; $i <= 50000; $i++) {
echo $i.',';
}
$time_end = microtime(true);
$time = $time_end - $time_start;
echo '<br /><br />'.$time.'<br /> <br />';
?>
Range: 0.41276001930237
For: 0.3721399307251
jay at NOspam dot myd3 dot com ¶
4 years ago
This is a modified version of thomas' range_string() function. It's simpler, cleaner, and more robust, but it lacks the advanced features his function had, hopefully it will be of assitance to someone.
Examples:
input: "1, 2, 3, 4, 5, 6" --> output: 1, 2, 3, 4, 5, 6
input: "1-6" --> output: 1, 2, 3, 4, 5, 6
input: "1-6" --> output: 1, 2, 3, 4, 5, 6
input: "1 - -6" --> output: 1, 2, 3, 4, 5, 6
input: "0 - 0" --> output: 0
input: "1, 4-6, 2" --> output: 1, 2, 4, 5, 6
input: "6,3-1" --> output: 1, 2, 3, 6
<?php
define('RANGE_ARRAY_SORT', 1);
define('RANGE_ARRAY', 2);
define('RANGE_STRING_SORT', 3);
define('RANGE_STRING', 4);
function range_string($range_str, $output_type = RANGE_ARRAY_SORT)
{
// Remove spaces and nother non-essential characters
$find[] = "/[^\d,\-]/";
$replace[] = "";
// Remove duplicate hyphens
$find[] = "/\-+/";
$replace[] = "-";
// Remove duplicate commas
$find[] = "/\,+/";
$replace[] = ",";
$range_str = preg_replace($find, $replace, $range_str);
// Remove any commas or hypens from the end of the string
$range_str = trim($range_str,",-");
$range_out = array();
$ranges = explode(",", $range_str);
foreach($ranges as $range)
{
if(is_numeric($range) || strlen($range) == 1)
{
// Just a number; add it to the list.
$range_out[] = (int) $range;
}
else if(is_string($range))
{
// Is probably a range of values.
$range_exp = preg_split("/(\D)/",$range,-1,PREG_SPLIT_DELIM_CAPTURE);
$start = $range_exp[0];
$end = $range_exp[2];
if($start > $end)
{
for($i = $start; $i >= $end; $i -= 1)
{
$range_out[] = (int) $i;
}
}
else
{
for($i = $start; $i <= $end; $i += 1)
{
$range_out[] = (int) $i;
}
}
}
}
switch ($output_type) {
case RANGE_ARRAY_SORT:
$range_out = array_unique($range_out);
sort($range_out);
case RANGE_ARRAY:
return $range_out;
break;
case RANGE_STRING_SORT:
$range_out = array_unique($range_out);
sort($range_out);
case RANGE_STRING:
default:
return implode(", ", $range_out);
break;
}
}
// Sample Usage:
$range = range_string("6, 3-1");
?>
thomas+php1 at tgohome dot com ¶
4 years ago
Range as a string. Items are separated with a comma; which can be in any of the following formats:
"1, 2, 3, 4, 5, 6" - output: 1, 2, 3, 4, 5, 6
"1 - 6" - output: 1, 2, 3, 4, 5, 6
"1 -%2 6" - output: 1, 3, 5 (last number will not be counted unless it evenly fits in)
"1 - -6" - output: 1, 0, -1, -2, -3, -4, -5, -6
"0 - 0" - output: 0
"1, 2, 3, [LAST_NUM] - 6" - output: 1, 2, 3, 3, 4, 5, 6 (note repeated 3)
"1, 2, 3, [LAST_NUM+1] - 6" - output: 1, 2, 3, 4, 5, 6 (no repeated 3)
"1, 2, 3, [LAST_NUM+-1] - 6" - output: 1, 2, 3, 2, 3, 4, 5, 6
<?php
define('RANGE_ARRAY', 1);
define('RANGE_STRING', 2);
function range_string($range_str, $output_type = RANGE_ARRAY)
{
$range_out = array();
$ranges = explode(",", $range_str);
$last_num = 0;
foreach($ranges as $range)
{
$step = 1;
$range = trim($range);
if(is_numeric($range))
{
// Just a number; add it to the list.
$range_out[] = $range;
$last_num = $range;
}
else if(is_string($range))
{
// Figure out if it is just a character.
if(strlen($range) == 1)
{
$range_out[] = (string)$range;
$last_num = 0;
}
else
{
// Is probably a range of values.
$range_exp = explode(" ", $range);
if(substr($range_exp[1], 0, 1) == '-' && !is_numeric(substr($range_exp[1], 0, 1)))
{
// Jumping range?
$jump = str_split($range_exp[1], 1);
if(count($jump) > 0)
{
if($jump[1] == '%')
{
$step = substr($range_exp[1], 2);
}
}
else
{
// Normal range.
$step = 1;
}
}
else
{
$step = 1;
}
if($range_exp[0] == '[LAST_NUM]')
{
$start = $last_num;
}
else
{
$exp = explode("+", $range_exp[0]);
if($exp[0] == '[LAST_NUM')
{
$start = $last_num + trim($exp[1], ']');
}
else
{
$start = $range_exp[0];
}
}
$end = $range_exp[2];
if($start > $end)
{
for($i = $start; $i >= $end; $i -= $step)
{
$range_out[] = $i;
}
$last_num = $i;
}
else
{
for($i = $start; $i <= $end; $i += $step)
{
$range_out[] = $i;
}
$last_num = $i;
}
// echo $step . ", ";
}
}
}
if($output_type == RANGE_ARRAY)
{
return $range_out;
}
else
{
return implode(", ", $range_out);
}
}
echo range_string("1, 2, 3, [LAST_NUM+1] - 6", RANGE_STRING);
?>
Forrester at tfcustomized dot com ¶
9 years ago
Since users of < PHP 5.0.0 don't have the option of the step parameter, I've created a little function to account for it:
@USAGE: (int low, int high [, int step])
function myRange($low,$high,$step=1)
{
$ranArray = range($low,$high);
$step--;
$keys = count($ranArray);
for($i=0;$i<$keys;$i++)
{
$retArray[] = $ranArray[$i];
$i = $i + $step;
}
return $retArray;
}
// Example usage:
print_r(myRange(1,11,2));
// Returns the array:
// [0] => 1
// [1] => 3
// [2] => 5
// [3] => 7
// [4] => 9
// [5] => 11
donwilson at gmail dot com ¶
8 years ago
To speed your MyRange() function, I have created a much nicer function with less code to sift through to include the step parameter.
<?php
// range() limitation for PHP <5.0.0
function myRange($num1, $num2, $step=1)
{
for($i = $num1; $i <= $num2; $i += $step)
{
$temp[] = $i;
}
return $temp;
}
?>
For whatever reason my comment was deleted..?