Browsers don't choke on integers _starting_ with BigInt (64 bits), but before that (53 bits). The introduction of BigInt to modern browsers doesn't help much, when JSON handling functions do not support it. So I am trying to remedy that. My approach is to handle the decoded array before re-encoding it to a string:
<?php
function fix_large_int(&$value)
{
if (is_int($value) && $value > 9007199254740991)
$value = strval($value);
}
$json_str = '{"id":[1234567890123456789,12345678901234567890]}';
$json_arr = json_decode($json_str, flags: JSON_BIGINT_AS_STRING | JSON_OBJECT_AS_ARRAY);
echo(json_encode($json_arr)); // {"id":[1234567890123456789,"12345678901234567890"]} (BigInt is already converted to a string here)
array_walk_recursive($json_arr, 'fix_large_int');
echo(json_encode($json_arr)); // {"id":["1234567890123456789","12345678901234567890"]}
?>
json_decode
(PHP 5 >= 5.2.0, PHP 7, PHP 8, PECL json >= 1.2.0)
json_decode — 对 JSON 格式的字符串进行解码
说明
接受一个 JSON 编码的字符串并且把它转换为 PHP 值。
参数
json-
待解码的
jsonstring 格式的字符串。这个函数仅能处理 UTF-8 编码的数据。
注意:
PHP 实现了 JSON 的一个超集，参考 » RFC 7159.
associative-
当为
true时，JSON 对象将返回关联 array；当为false时，JSON 对象将返回 object。当为null时，JSON 对象将返回关联 array 或 object，这取决于是否在flags中设置JSON_OBJECT_AS_ARRAY。 depth-
需要解码的结构，其最大嵌套深度。该值必须大于
0或者小于等于2147483647。 flags-
由
JSON_BIGINT_AS_STRING、JSON_INVALID_UTF8_IGNORE、JSON_INVALID_UTF8_SUBSTITUTE、JSON_OBJECT_AS_ARRAY、JSON_THROW_ON_ERROR组成的掩码。这些常量的行为在 JSON constants 页面有进一步描述。
返回值
返回在 json 中编码的数据作为合适的 PHP 类型。没有引号的值
true、false 和 null
会相应地返回 true、false 和 null。如果 json
无法被解码，或者编码数据深度超过了嵌套限制的话，将会返回 null。
错误／异常
如果 depth 超出允许的范围，自 PHP 8.0.0 起将会抛出
ValueError，在此之前的版本将会引发
E_WARNING 级别的错误。
更新日志
| 版本 | 说明 |
|---|---|
| 7.3.0 |
flags 新增 JSON_THROW_ON_ERROR。
|
| 7.2.0 |
现在 associative 允许为 null。
|
| 7.2.0 |
flags 新增 JSON_INVALID_UTF8_IGNORE、JSON_INVALID_UTF8_SUBSTITUTE。
|
| 7.1.0 |
An empty JSON key ("") can be encoded to the empty object property
instead of using a key with value _empty_.
|
示例
示例 #1 json_decode() 的例子
<?php
$json = '{"a":1,"b":2,"c":3,"d":4,"e":5}';
var_dump(json_decode($json));
var_dump(json_decode($json, true));
?>以上示例会输出：
object(stdClass)#1 (5) {
["a"] => int(1)
["b"] => int(2)
["c"] => int(3)
["d"] => int(4)
["e"] => int(5)
}
array(5) {
["a"] => int(1)
["b"] => int(2)
["c"] => int(3)
["d"] => int(4)
["e"] => int(5)
}
示例 #2 Accessing invalid object properties
Accessing elements within an object that contain characters not permitted under PHP's naming convention (e.g. the hyphen) can be accomplished by encapsulating the element name within braces and the apostrophe.
<?php
$json = '{"foo-bar": 12345}';
$obj = json_decode($json);
print $obj->{'foo-bar'}; // 12345
?>示例 #3 common mistakes using json_decode()
<?php
// the following strings are valid JavaScript but not valid JSON
// the name and value must be enclosed in double quotes
// single quotes are not valid
$bad_json = "{ 'bar': 'baz' }";
json_decode($bad_json); // null
// the name must be enclosed in double quotes
$bad_json = '{ bar: "baz" }';
json_decode($bad_json); // null
// trailing commas are not allowed
$bad_json = '{ bar: "baz", }';
json_decode($bad_json); // null
?>示例 #4 depth errors
<?php
// Encode some data with a maximum depth of 4 (array -> array -> array -> string)
$json = json_encode(
array(
1 => array(
'English' => array(
'One',
'January'
),
'French' => array(
'Une',
'Janvier'
)
)
)
);
// Show the errors for different depths.
var_dump(json_decode($json, true, 4));
echo 'Last error: ', json_last_error_msg(), PHP_EOL, PHP_EOL;
var_dump(json_decode($json, true, 3));
echo 'Last error: ', json_last_error_msg(), PHP_EOL, PHP_EOL;
?>以上示例会输出：
array(1) {
[1]=>
array(2) {
["English"]=>
array(2) {
[0]=>
string(3) "One"
[1]=>
string(7) "January"
}
["French"]=>
array(2) {
[0]=>
string(3) "Une"
[1]=>
string(7) "Janvier"
}
}
}
Last error: No error
NULL
Last error: Maximum stack depth exceeded
示例 #5 json_decode() of large integers
<?php
$json = '{"number": 12345678901234567890}';
var_dump(json_decode($json));
var_dump(json_decode($json, false, 512, JSON_BIGINT_AS_STRING));
?>以上示例会输出：
object(stdClass)#1 (1) {
["number"]=>
float(1.2345678901235E+19)
}
object(stdClass)#1 (1) {
["number"]=>
string(20) "12345678901234567890"
}
注释
注意:
The JSON spec is not JavaScript, but a subset of JavaScript.
注意:
In the event of a failure to decode, json_last_error() can be used to determine the exact nature of the error.
add a note
User Contributed Notes 4 notes
Alien426 ¶
3 years ago
greaties at ghvernuft dot nl ¶
2 years ago
To load an object with data in json format:
function loadJSON($Obj, $json)
{
$dcod = json_decode($json);
$prop = get_object_vars ( $dcod );
foreach($prop as $key => $lock)
{
if(property_exists ( $Obj , $key ))
{
if(is_object($dcod->$key))
{
loadJSON($Obj->$key, json_encode($dcod->$key));
}
else
{
$Obj->$key = $dcod->$key;
}
}
}
}
cubefox at web dot NOSPAMPLEASE dot de ¶
3 years ago
Warning: As the section "return values" mentions, the return value NULL is ambiguos. To repeat, it can mean three things:
* The input string had the value "null"
* There was an error while parsing the input data
* The encoded data was deeper than the recursion limit
To distinguish these cases, json_last_error() can be used.
mattia ¶
3 years ago
if you're using ajax to post, and your JavaScript code looks like this:
<code>
var xhttp = new XMLHttpRequest();
xhttp.open("POST", "something.php", true);
xhttp.setRequestHeader("Content-Type", "application/json");
xhttp.onreadystatechange = function() {
if (this.readyState == 4 && this.status == 200) {
// do something
}
};
var data = {some: "thing"};
xhttp.send(JSON.stringify(data));
</code>
then in <code>something.php</code> you can retrieve your json by doing
<?php
$data = json_decode(file_get_contents("php://input"), true);
?>
