fsockopen

(PHP 4, PHP 5, PHP 7, PHP 8)

fsockopen打开 Internet 或者 Unix 套接字连接

说明

fsockopen(
    string $hostname,
    int $port = -1,
    int &$error_code = null,
    string &$error_message = null,
    ?float $timeout = null
): resource|false

初始化套接字连接到指定 hostname 资源。

所支持的套接字传输器列表所述,PHP 支持 Internet 和 Unix 域中的目标。也可以通过 stream_get_transports() 获取支持的传输器列表。

默认情况下将以阻塞模式开启套接字连接。可以通过 stream_set_blocking() 将它转换到非阻塞模式。

stream_socket_client() 与之非常相似,而且提供了更加丰富的参数设置,包括非阻塞连接和提供流上下文的能力。

参数

hostname

如果安装了 OpenSSL,那么可以在主机名地址前面添加 ssl:// 或者是 tls://,从而可以使用基于 TCP/IP 协议的 SSL 或者 TLS 的客户端连接到远程主机。

port

端口号。可以省略该参数或传 -1,则表示传输器不使用端口,例如 unix://

error_code

如果提供该参数,则会保存调用系统级别 connect() 发生的系统级错误号。

如果 error_code 的返回值为 0,且函数的返回值为 false,则表明错误发生在 connect() 调用之前。这很可能是由于初始化套接字的问题。

error_message

错误信息将以字符串的信息返回。

timeout

设置连接的时限,单位为秒。当为 null 时,使用 default_socket_timeout php.ini 设置。

注意:

如果需要对为套接字读/写数据数据操作设置超时,请使用 stream_set_timeout()fsockopen()timeout 参数仅仅在连接套接字时适用。

返回值

fsockopen() 返回文件指针,可以跟其他文件函数(比如 fgets()fgetss()fwrite()fclose()feof())一起使用。如果调用失败,将返回 false

错误/异常

如果 hostname 不是有效域,则抛出 E_WARNING

更新日志

版本 说明
8.0.0 timeout 现在可以为 null。

示例

示例 #1 fsockopen() 示例

<?php
$fp
= fsockopen("www.example.com", 80, $errno, $errstr, 30);
if (!
$fp) {
echo
"$errstr ($errno)<br />\n";
} else {
$out = "GET / HTTP/1.1\r\n";
$out .= "Host: www.example.com\r\n";
$out .= "Connection: Close\r\n\r\n";
fwrite($fp, $out);
while (!
feof($fp)) {
echo
fgets($fp, 128);
}
fclose($fp);
}
?>

示例 #2 使用 UDP 连接

下面这个例子展示了怎么样在自己的机器上通过 UDP 服务“daytime”(端口号 13)中来检索日期和时间。

<?php
$fp
= fsockopen("udp://127.0.0.1", 13, $errno, $errstr);
if (!
$fp) {
echo
"ERROR: $errno - $errstr<br />\n";
} else {
fwrite($fp, "\n");
echo
fread($fp, 26);
fclose($fp);
}
?>

注释

注意:

根据环境的不同,Unix 域或可选的连接超时可能无效。

警告

即使远程主机无法访问,UDP 套接字有时候也能打开且无错误。只有当从套接字读/写数据的时候才会出现错误。这样的原因是 UDP 是“无连接”协议,这意味着在真正发送/接收数据之前,操作系统不会尝试为套接字创建连接。

注意: 当指定数值型的 IPv6 地址(例如 fe80::1)时必须用方括号将 IP 围起来——例如, tcp://[fe80::1]:80

参见

add a note add a note

User Contributed Notes 41 notes

up
19
joe at edwardsconsultants dot com
20 years ago
just a quick note for users attempting https and thinking they must resort to curl or alternate methods -
you can use fsockopen, just read the docs closely.  basically they are saying to use 'ssl://' for a HTTPS (SSL) web request.

so this would work for authorize.net, and others; even for that paypal IPN - however I think it would be best to leave the site and deal with paypal's form:

<?php
$host
= "something.example.com";
$port = 443;
$path = "/the/url/path/file.php"; //or .dll, etc. for authnet, etc.

//you will need to setup an array of fields to post with
//then create the post string
$formdata = array ( "x_field" => "somevalue");
//build the post string
 
foreach($formdata AS $key => $val){
   
$poststring .= urlencode($key) . "=" . urlencode($val) . "&";
  }
// strip off trailing ampersand
$poststring = substr($poststring, 0, -1);

$fp = fsockopen("ssl://".$host, $port, $errno, $errstr, $timeout = 30);

if(!
$fp){
//error tell us
echo "$errstr ($errno)\n";
  
}else{

 
//send the server request
 
fputs($fp, "POST $path HTTP/1.1\r\n");
 
fputs($fp, "Host: $host\r\n");
 
fputs($fp, "Content-type: application/x-www-form-urlencoded\r\n");
 
fputs($fp, "Content-length: ".strlen($poststring)."\r\n");
 
fputs($fp, "Connection: close\r\n\r\n");
 
fputs($fp, $poststring . "\r\n\r\n");

 
//loop through the response from the server
 
while(!feof($fp)) {
    echo
fgets($fp, 4096);
  }
 
//close fp - we are done with it
 
fclose($fp);
}
?>
up
15
sir_reality2001 at yahoo dot com
20 years ago
<?php
// This script is an example of posting multiple files using
// fsockopen.
// The tricky part is making sure the HTTP headers and file boundaries are acceptable to the target webserver.
// This script is for example purposes only and could/should be improved upon.

$host='targethost';
$port=80;
$path='/test/socket/file_upload/receive_files.php';

// the file you want to upload
$file_array[0] = "dingoboy.gif"; // the file
$file_array[1] = "dingoboy2.gif"; // the file
$file_array[2] = "dingoboy3.gif"; // the file
$content_type = "image/gif"; // the file mime type
//$content_type = "text/plain";
//echo "file_array[0]:$file_array[0]<br><br>";

srand((double)microtime()*1000000);
$boundary = "---------------------------".substr(md5(rand(0,32000)),0,10);

$data = "--$boundary";

for(
$i=0;$i<count($file_array);$i++){
  
$content_file = join("", file($file_array[$i]));

  
$data.="
Content-Disposition: form-data; name=\"file"
.($i+1)."\"; filename=\"$file_array[$i]\"
Content-Type:
$content_type

$content_file
--
$boundary";

}

$data.="--\r\n\r\n";

$msg =
"POST $path HTTP/1.0
Content-Type: multipart/form-data; boundary=
$boundary
Content-Length: "
.strlen($data)."\r\n\r\n";

$result="";

// open the connection
$f = fsockopen($host, $port);

fputs($f,$msg.$data);

// get the response
while (!feof($f)) $result .= fread($f,32000);

fclose($f);

?>
up
6
ghzero at ghzero dot de
14 years ago
note:
the default protocol - if not given - seems to be tcp://
up
5
richard dot lajaunie at cote-azur dot cci dot fr
18 years ago
<?php
/************************************************************
* Author: Richard Lajaunie
* Mail : richard.lajaunie@cote-azur.cci.fr
*
* subject : this script retreive all mac-addresses on all ports
* of a Cisco 3548 Switch by a telnet connection
*
* base on the script by: xbensemhoun at t-systems dot fr
**************************************************************/

if ( array_key_exists(1, $argv) ){
  
$cfgServer = $argv[1];
}else{
   echo
"ex: 'php test.php 10.0.0.0' \n";
   exit;
}

$cfgPort    = 23;                //port, 22 if SSH
$cfgTimeOut = 10;

$usenet = fsockopen($cfgServer, $cfgPort, $errno, $errstr), $cfgTimeOut);

if(!
$usenet){
       echo
"Connexion failed\n";
       exit();
}else{
       echo
"Connected\n";
      
fputs ($usenet, "password\r\n");
      
fputs ($usenet, "en\r\n");
      
fputs ($usenet, "password\r\n");
      
fputs ($usenet, "sh mac-address-table\r\n");
      
fputs ($usenet, " "); // this space bar is this for long output
     
       // this skip non essential text
      
$j = 0;
       while (
$j<16){
      
fgets($usenet, 128);
      
$j++;
       }
  
stream_set_timeout($usenet, 2); // set the timeout for the fgets
  
$j = 0;
       while (!
feof($usenet)){
      
$ret = fgets($usenet, 128);
      
$ret = str_replace("\r", '', $ret);
      
$ret = str_replace("\n", "", $ret);
       if  (
ereg("FastEthernet", $ret)){
           echo
"$ret \n";
       }
       if (
ereg('--More--', $ret) ){
          
fputs ($usenet, " "); // for following page
      
}
      
$info = stream_get_meta_data($usenet);
       if (
$info['timed_out']) {
          
$j++;
       }
       if (
$j >2){
          
fputs ($usenet, "lo");
           break;
       }
   }
}
echo
"End.\r\n";
?>
up
9
ryan1_00 at hotmail dot com
17 years ago
This script checks specific ports so you need to have the correct port open on the server for this to work.

E.g if i have a windows domain controller and it is servering LDAP then the following would be used to check it is online:
<?php
chkServer
("MyDC", "389");
?>

for a webserver:
<?php
chkServer
("MyWebSvr", "80");
?>

etc etc
--------------------------------------------------------

<?php
// check if a server is up by connecting to a port
function chkServer($host, $port)
{  
   
$hostip = @gethostbyname($host); // resloves IP from Hostname returns hostname on failure
   
   
if ($hostip == $host) // if the IP is not resloved
   
{
        echo
"Server is down or does not exist";
    }
    else
    {
        if (!
$x = @fsockopen($hostip, $port, $errno, $errstr, 5)) // attempt to connect
       
{
            echo
"Server is down";
        }
        else
        {
            echo
"Server is up";
            if (
$x)
            {
                @
fclose($x); //close connection
           
}
        } 
    }
}
?>
up
7
robin at pozytron dot com
18 years ago
I have found, when using fsockopen() and the POST method, that using HTTP/1.1 is VERY significantly slower than HTTP/1.0 (at least for the server I'm querying, an Orion-based server). Also, using cURL tended to be faster than fsockopen(), though only slightly. For example, here was a recent set of data (for the same exact request in each case):

cURL: 4.2sec
fsockopen() HTTP/1.0: 4.9sec
fsockopen() HTTP/1.1: 19.9sec (!)

I'm not sure why this was occurring. Perhaps it has something to do with the Orion server, which I have little experience with. However, it was not a fluke, and I double-checked the code to make sure there were no errors.

EDITORS NOTE: HTTP/1.1 uses persistent connection causing this delay. Use "Connection: close" header to disable it.
up
2
edwin at bitstorm dot org
19 years ago
Here's a function to just fetch the contents behind an URL.

<?php
function fetchURL( $url ) {
   
$url_parsed = parse_url($url);
   
$host = $url_parsed["host"];
   
$port = $url_parsed["port"];
    if (
$port==0)
       
$port = 80;
   
$path = $url_parsed["path"];
    if (
$url_parsed["query"] != "")
       
$path .= "?".$url_parsed["query"];

   
$out = "GET $path HTTP/1.0\r\nHost: $host\r\n\r\n";

   
$fp = fsockopen($host, $port, $errno, $errstr, 30);

   
fwrite($fp, $out);
   
$body = false;
    while (!
feof($fp)) {
       
$s = fgets($fp, 1024);
        if (
$body )
           
$in .= $s;
        if (
$s == "\r\n" )
           
$body = true;
    }
   
   
fclose($fp);
   
    return
$in;
}
?>
up
2
michiel at parse dot nl
19 years ago
The following snippet allows you to retrieve the title of a page.

Great for rewriting auto-url detectors to display the actual title rather then http://...

<?php
echo get_url_title("http://www.php.net/cal.php?id=409");

function
get_url_title($url, $timeout = 2)
{
   
$url = parse_url($url);

    if(!
in_array($url['scheme'],array('','http')))
        return;

   
$fp = fsockopen ($url['host'], ($url['port'] > 0 ? $url['port'] : 80), $errno, $errstr, $timeout);
    if (!
$fp)
    {
        return;
       
// echo "$errstr ($errno)<br>\n";
   
}
    else
    {
       
fputs ($fp, "GET /".$url['path'].($url['query'] ? '?'.$url['query'] : '')." HTTP/1.0\r\nHost: ".$url['host']."\r\n\r\n");
       
$d = '';
        while (!
feof($fp))
        {
           
$d .= fgets ($fp,2048);

            if(
preg_match('~(</head>|<body>|(<title>\s*(.*?)\s*</title>))~i', $d, $m))
                break;
        }
       
fclose ($fp);

        return
$m[3];
    }
}
?>
up
4
verran at descent-rangers dot com
21 years ago
I was tearing my hair out for a week trying to figure out how to do this.

If you use fsockopen with a service that doesn't have an EOF, or you try to read beyond EOF or line break, PHP can hang completely.

In my case, I was trying to write a class that talks to Kali servers (www.kali.net) to get a list of people on the chat server. To keep PHP from hanging due to the above, I discovered this:

<?php
   
class kali_utils {
        function
games_list($kali_server_ip, $kali_server_port) {
           
$result = array();
           
$fp = fsockopen($kali_server_ip, $kali_server_port, $errno, $error, 30);
            if (!
$fp) {
               
$result["errno"] = $errno;
               
$result["error"] = $error;
            }
            else {
               
fputs($fp, "KALIQ");
               
$header = fread($fp, 5);
               
$bytes_left = socket_get_status($fp);
                if (
$bytes_left > 0) {
                   
$result["results"] = fread($fp, $bytes_left["unread_bytes"]);
                }
                else {
                   
$result["results"] = "";
                }
               
fclose($fp);
            }
            return
$result;
        }
    }
?>

When I send the request packet, I get a response packet of length 5. Then I call socket_get_status() and use the unread_bytes key from it to know how far to fread from the socket. Works very good.

I've only used this on PHP 4.2.1 so far.
up
6
Alexander Wegener
16 years ago
To check if a Url is Online (with http and https)
Using @fgets to hide Warning when using SSL
(Bug: "Warning: function.fgets SSL: fatal protocol error", http://bugs.php.net/bug.php?id=23220)

<?php

   
function isOnline($url) {
        if (!
$url_info = parse_url($url)) {
            return
false;   
        }
       
        switch (
$url_info['scheme']) {
            case
'https':
               
$scheme = 'ssl://';
               
$port = 443;
                break;
            case
'http':
            default:
               
$scheme = '';
               
$port = 80;   
        }
       
       
$data = "";
       
$fid = @fsockopen($scheme . $url_info['host'], $port, $errno, $errstr, 30);
        if (
$fid) {
           
fputs($fid, 'HEAD ' . (isset($url_info['path'])? $url_info['path']: '/') . (isset($url_info['query'])? '?' . $url_info['query']: '') . " HTTP/1.0\r\n" .
                       
"Connection: close\r\n" .
                       
'Host: ' . $url_info['host'] . "\r\n\r\n");   
            while (!
feof($fid)) {
               
$data .= @fgets($fid, 128);
            }
           
fclose($fid);
            return !empty(
$data);
        } else {
            return
false;
        }
    }

?>
up
4
Kiki_EF
18 years ago
Additional ICQ status request over proxy
<?php
function icq_uin($uin)
{
    if (!
is_numeric($uin))
        return
false;
   
$proxy_name = 'proxy.mydomain.de';
   
$proxy_port = 8080;
   
$proxy_user = "";
   
$proxy_pass = "";
   
$proxy_cont = '';
   
$request_url = "http://status.icq.com/online.gif?icq=$uin";

   
$proxy_fp = fsockopen($proxy_name, $proxy_port);
    if (!
$proxy_fp)
        return
false;
   
fputs($proxy_fp, "GET $request_url HTTP/1.0\r\nHost: $proxy_name\r\n");
   
fputs($proxy_fp, "Proxy-Authorization: Basic ". base64_encode ("$proxy_user:$proxy_pass")."\r\n\r\n");
    while(!
feof($proxy_fp)){
       
$proxy_cont .= fread($proxy_fp,4096);
    }
   
fclose($proxy_fp);
   
$proxy_cont = substr($proxy_cont, strpos($proxy_cont,"\r\n\r\n")+4);
    if (
strstr($proxy_cont, 'online1'))
        return
'online';
    if (
strstr($proxy_cont, 'online0'))
        return
'offline';
    if (
strstr($proxy_cont, 'online2'))
        return
'disabled';
}
echo
"User is ".icq_uin(123456789012345);
?>

Thanx

[EDIT BY danbrown AT php DOT net: Based on code provided in a note by (rafaelbc AT matrix DOT com DOT br) on 23-MAY-09, which has since been removed.]
up
3
kexianbin at diyism dot com
12 years ago
My recursive unchunk function:

<?php
function unchunk($result)
         {return
preg_replace('/([0-9A-F]+)\r\n(.*)/sie',
                             
'($cnt=@base_convert("\1", 16, 10))
                               ?substr(($str=@strtr(\'\2\', array(\'\"\'=>\'"\', \'\\\\0\'=>"\x00"))), 0, $cnt).unchunk(substr($str, $cnt+2))
                               :""
                              '
,
                             
$result
                            
);
         }
?>
up
1
v13+phpnet at it dot teithe dot gr
17 years ago
The following function performs pop3 authentication. Returns NULL on error, or true/false to indicate username/password matching:

$address is the hostname of the server and $ssl is a boolean that indicates whether an SSL connection is requested.

<?php
function pop3authCheck($username, $password, $address, $ssl)
{
    if (
$ssl)
       
$uri="ssl://$address:995";
    else
       
$uri="tcp://$address:110";

   
$fp=fsockopen($uri);

    if (!
$fp)
        return(
NULL);

   
$st=fgets($fp, 512);
    if (
substr($st, 0, 3)!="+OK")
    {
       
fclose($fp);
        return(
NULL);
    }

   
$st="USER $username\n";
    if (
fwrite($fp, $st)!=strlen($st))
    {
       
fclose($fp);
        return(
NULL);
    }

   
$st=fgets($fp, 512);
    if (
substr($st, 0, 3)!="+OK")
    {
       
fclose($fp);
        return(
NULL);
    }

   
$st="PASS $password\n";
    if (
fwrite($fp, $st)!=strlen($st))
    {
       
fclose($fp);
        return(
NULL);
    }

   
$st=fgets($fp, 512);
   
fclose($fp);
    if (
substr($st, 0, 3)=="+OK")
        return(
true);
    else if (
substr($st, 0, 4)=="+ERR")
        return(
false);
    else
        return(
NULL);
}
?>
up
1
Duukkis
18 years ago
Lots of tries and lots of reading http-headers...

If you want to post $_POST vars and (in this case) one file named userfile to $remote_server and $remote_url.

<?php
       
// get the necessary data
       
$file_name = $_FILES['userfile']['name'];     // the file
       
$tmp_name = $_FILES['userfile']['tmp_name'];     // the file
       
$content_type = $_FILES['userfile']['type'];     // the file mime type
       
       
srand((double)microtime()*1000000);
       
$boundary = "---------------------".substr(md5(rand(0,32000)),0,10);
       
       
// Build the header
       
$header = "POST $remote_url HTTP/1.0\r\n";
       
$header .= "Host: $remote_server\r\n";
       
$header .= "Content-type: multipart/form-data, boundary=$boundary\r\n";
       
// attach post vars
       
foreach($_POST AS $index => $value){
           
$data .="--$boundary\r\n";
           
$data .= "Content-Disposition: form-data; name=\"".$index."\"\r\n";
           
$data .= "\r\n".$value."\r\n";
           
$data .="--$boundary\r\n";
        }
       
// and attach the file
       
$data .= "--$boundary\r\n";
       
$content_file = join("", file($tmp_name));
       
$data .="Content-Disposition: form-data; name=\"userfile\"; filename=\"$file_name\"\r\n";
       
$data .= "Content-Type: $content_type\r\n\r\n";
       
$data .= "".$content_file."\r\n";
       
$data .="--$boundary--\r\n";
       
$header .= "Content-length: " . strlen($data) . "\r\n\r\n";
                
// Open the connection
       
$fp = fsockopen($remote_server, 80);
       
// then just
       
fputs($fp, $header.$data);
       
fclose($fp);
?>
up
5
nytro_rst at yahoo dot com
14 years ago
A simple proxy list checker. You can check a list ip:port if that port is opened on that IP.

<?php

$fisier
= file_get_contents('proxy_list.txt'); // Read the file with the proxy list
$linii = explode("\n", $fisier); // Get each proxy
$fisier = fopen("bune.txt", "a"); // Here we will write the good ones

for($i = 0; $i < count($linii) - 1; $i++) test($linii[$i]); // Test each proxy

function test($proxy)
{
  global
$fisier;
 
$splited = explode(':',$proxy); // Separate IP and port
 
if($con = @fsockopen($splited[0], $splited[1], $eroare, $eroare_str, 3))
  {
   
fwrite($fisier, $proxy . "\n"); // Check if we can connect to that IP and port
   
print $proxy . '<br>'; // Show the proxy
   
fclose($con); // Close the socket handle
 
}
}

fclose($fisier); // Close the file

?>
up
1
blazely at removetoemail netspace net au
20 years ago
Here's a quick function to establish a connection to a web server that will time out if the connection is lost after a user definable amount of time or if the server can't be reached.

Also supports Basic authentication if a username/password is specified. Any improvements or criticisms, please email me! :-)

Returns either a resource ID, an error code or 0 if the server can't be reached at all. Returns -1 in the event that something really wierd happens like a non-standard http response or something. Hope it helps someone.

Cheers,

Ben Blazely

<?php
function connectToURL($addr, $port, $path, $user="", $pass="", $timeout="30")
{
$urlHandle = fsockopen($addr, $port, $errno, $errstr, $timeout);
if (
$urlHandle)
{
 
socket_set_timeout($urlHandle, $timeout);
  if (
$path)
  {
  
$urlString = "GET $path HTTP/1.0\r\nHost: $addr\r\nConnection: Keep-Alive\r\nUser-Agent: MyURLGrabber\r\n";
   if (
$user)
   
$urlString .= "Authorization: Basic ".base64_encode("$user:$pass")."\r\n";
   
$urlString .= "\r\n";

   
fputs($urlHandle, $urlString);

   
$response = fgets($urlHandle);

    if (
substr_count($response, "200 OK") > 0)      // Check the status of the link
   
{
    
$endHeader = false;                     // Strip initial header information
    
while ( !$endHeader)
     {
      if (
fgets($urlHandle) == "\r\n")
      
$endHeader = true;
     }

     return
$urlHandle;                      // All OK, return the file handle
   
}
    else if (
strlen($response) < 15)                // Cope with wierd non standard responses
   
{
    
fclose($urlHandle);
     return -
1;
    }
    else                                           
// Cope with a standard error response
   
{
    
fclose($urlHandle);
     return
substr($response,9,3);
    }
   }

   return
$urlHandle;
  }
  else
  {
   return
0;
  }
}
}
?>
up
4
asalamanca at redcetus dot com
20 years ago
This is a very fast program for test a form or link (many times).
<?php
$repeat 
= 100// How many times repeat the test

$timeout = 100// Max time for stablish the conection
$size    = 16;   // Bytes will be read (and display). 0 for read all

$server  = '127.0.0.1';            // IP address
$host    = 'www.example.net';             // Domain name
$target  = '/poll/answer.asp';        // Specific program
$referer = 'http://www.example.com/';    // Referer
$port    = 80;

// Setup an array of fields to get with then create the get string
$gets = array ( 'get_field_1' => 'somevalue',
               
'get_field_2' => 'somevalue' );

// Setup an array of fields to post with then create the post string
$posts = array ( 'post_field_1' => 'somevalue',
                
'post_field_2' => 'somevalue' );

// That's all. Now the program proccess $repeat times

$method = "GET";
if (
is_array( $gets ) ) {
   
$getValues = '?';
    foreach(
$gets AS $name => $value ){
       
$getValues .= urlencode( $name ) . "=" . urlencode( $value ) . '&';
    }
   
$getValues = substr( $getValues, 0, -1 );
} else {
   
$getValues = '';
}

if (
is_array( $posts ) ) {
    foreach(
$posts AS $name => $value ){
       
$postValues .= urlencode( $name ) . "=" . urlencode( $value ) . '&';
    }
   
$postValues = substr( $postValues, 0, -1 );
   
$method = "POST";
} else {
   
$postValues = '';
}

$request  = "$method $target$getValues HTTP/1.1\r\n";
$request .= "Host: $host\r\n";
$request .= 'User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) ';
$request .= "Gecko/20021204\r\n";
$request .= 'Accept: text/xml,application/xml,application/xhtml+xml,';
$request .= 'text/html;q=0.9,text/plain;q=0.8,video/x-mng,image/png,';
$request .= "image/jpeg,image/gif;q=0.2,text/css,*/*;q=0.1\r\n";
$request .= "Accept-Language: en-us, en;q=0.50\r\n";
$request .= "Accept-Encoding: gzip, deflate, compress;q=0.9\r\n";
$request .= "Accept-Charset: ISO-8859-1, utf-8;q=0.66, *;q=0.66\r\n";
$request .= "Keep-Alive: 300\r\n";
$request .= "Connection: keep-alive\r\n";
$request .= "Referer: $referer\r\n";
$request .= "Cache-Control: max-age=0\r\n";

if (
$method == "POST" ) {
   
$lenght = strlen( $postValues );
   
$request .= "Content-Type: application/x-www-form-urlencoded\r\n";
   
$request .= "Content-Length: $lenght\r\n";
   
$request .= "\r\n";
   
$request .= $postValues;
}

for (
$i = 0; $i < $repeat; $i++ ) {
   
$socket  = fsockopen( $server, $port, $errno, $errstr, $timeout );
   
fputs( $socket, $request );
    if (
$size > 0 ) {
       
$ret = fgets( $socket, $size );
    } else {
       
$ret = '';
        while ( !
feof( $socket ) ) {
           
$ret .= fgets( $socket, 4096 );
        }
    }
   
fclose( $socket );
    echo
"<hr> $i -- $content $ret";
}
?>

Alejandro Salamanca
up
3
brage (a t) jeffnappi (d.o.t) commie
20 years ago
thought you guys may appreciate this function, allows you to pass an array of urls to download and does so simultaneously using non-blocking sockets, then returns the data in an array.

<?php
// function connects to an array of URLS at the same time
// and returns an array of results.

function multiHTTP ($urlArr) {
$sockets = Array(); // socket array!
$urlInfo = Array(); // info arr
$retDone = Array();
$retData = Array();
$errno   = Array();
$errstr  = Array();
for (
$x=0;$x<count($urlArr);$x++) {
 
$urlInfo[$x] = parse_url($urlArr[$x]);
 
$urlInfo[$x][port] = ($urlInfo[$x][port]) ? $urlInfo[$x][port] : 80;
 
$urlInfo[$x][path] = ($urlInfo[$x][path]) ? $urlInfo[$x][path] : "/";
 
$sockets[$x] = fsockopen($urlInfo[$x][host], $urlInfo[$x][port],
                          
$errno[$x], $errstr[$x], 30);
 
socket_set_blocking($sockets[$x],FALSE);
 
$query = ($urlInfo[$x][query]) ? "?" . $urlInfo[$x][query] : "";
 
fputs($sockets[$x],"GET " . $urlInfo[$x][path] . "$query HTTP/1.0\r\nHost: " .
       
$urlInfo[$x][host] . "\r\n\r\n");
}
// ok read the data from each one
$done = false;
while (!
$done) {
  for (
$x=0; $x < count($urlArr);$x++) {
   if (!
feof($sockets[$x])) {
    if (
$retData[$x]) {
    
$retData[$x] .= fgets($sockets[$x],128);
    } else {
    
$retData[$x] = fgets($sockets[$x],128);
    }
   } else {
   
$retDone[$x] = 1;
   }
  }
 
$done = (array_sum($retDone) == count($urlArr));
}
return
$retData;
}
?>
up
1
saul dot dobney at dobney dot com
18 years ago
If you are using fsockopen to access webpage, but come across a redirect (Location: ) in the header and want to find and follow the redirect as in this snippet:

<?php
while (!feof($fp)) {
  
$line=fgets($fp, 1024);               
   if (
stristr($line,"location:")!="") {
   
$redirect=preg_replace("/location:/i","",$line);
   }
}
?>

Then don't forget to <?php $redirect = trim($redirect); ?> before trying to follow this new link as $redirect actually has a \r\n on the end of it and won't give you a valid path in the next iteration otherwise. A six hour bug.

Saul Dobney
up
1
konrad dot meyer at gmail dot com
19 years ago
The documentation example is of a GET request. I have found POST documentation to be lacking, and here's a function to easily simulate submitting form data:

<?php
# $host includes host and path and filename
    # ex: "myserver.com/this/is/path/to/file.php"
# $query is the POST query data
    # ex: "a=thisstring&number=46&string=thatstring
# $others is any extra headers you want to send
    # ex: "Accept-Encoding: compress, gzip\r\n"
function post($host,$query,$others=''){
   
$path=explode('/',$host);
   
$host=$path[0];
    unset(
$path[0]);
   
$path='/'.(implode('/',$path));
   
$post="POST $path HTTP/1.1\r\nHost: $host\r\nContent-type: application/x-www-form-urlencoded\r\n${others}User-Agent: Mozilla 4.0\r\nContent-length: ".strlen($query)."\r\nConnection: close\r\n\r\n$query";
   
$h=fsockopen($host,80);
   
fwrite($h,$post);
    for(
$a=0,$r='';!$a;){
       
$b=fread($h,8192);
       
$r.=$b;
       
$a=(($b=='')?1:0);
    }
   
fclose($h);
    return
$r;
}
?>
up
2
anarchy
16 years ago
The DEFAULT stream timeout is set according to default_socket_timeout in your php.ini file.  Took forever for me to dig that up....
up
2
Jeremy Saintot
13 years ago
Here is my fsockopen-based HTTP request fonction (GET and POST) :

<?php
function http_request(
   
$verb = 'GET',             /* HTTP Request Method (GET and POST supported) */
   
$ip,                       /* Target IP/Hostname */
   
$port = 80,                /* Target TCP port */
   
$uri = '/',                /* Target URI */
   
$getdata = array(),        /* HTTP GET Data ie. array('var1' => 'val1', 'var2' => 'val2') */
   
$postdata = array(),       /* HTTP POST Data ie. array('var1' => 'val1', 'var2' => 'val2') */
   
$cookie = array(),         /* HTTP Cookie Data ie. array('var1' => 'val1', 'var2' => 'val2') */
   
$custom_headers = array(), /* Custom HTTP headers ie. array('Referer: http://localhost/ */
   
$timeout = 1,           /* Socket timeout in seconds */
   
$req_hdr = false,          /* Include HTTP request headers */
   
$res_hdr = false           /* Include HTTP response headers */
   
)
{
   
$ret = '';
   
$verb = strtoupper($verb);
   
$cookie_str = '';
   
$getdata_str = count($getdata) ? '?' : '';
   
$postdata_str = '';

    foreach (
$getdata as $k => $v)
               
$getdata_str .= urlencode($k) .'='. urlencode($v) . '&';

    foreach (
$postdata as $k => $v)
       
$postdata_str .= urlencode($k) .'='. urlencode($v) .'&';

    foreach (
$cookie as $k => $v)
       
$cookie_str .= urlencode($k) .'='. urlencode($v) .'; ';

   
$crlf = "\r\n";
   
$req = $verb .' '. $uri . $getdata_str .' HTTP/1.1' . $crlf;
   
$req .= 'Host: '. $ip . $crlf;
   
$req .= 'User-Agent: Mozilla/5.0 Firefox/3.6.12' . $crlf;
   
$req .= 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' . $crlf;
   
$req .= 'Accept-Language: en-us,en;q=0.5' . $crlf;
   
$req .= 'Accept-Encoding: deflate' . $crlf;
   
$req .= 'Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7' . $crlf;
   
    foreach (
$custom_headers as $k => $v)
       
$req .= $k .': '. $v . $crlf;
       
    if (!empty(
$cookie_str))
       
$req .= 'Cookie: '. substr($cookie_str, 0, -2) . $crlf;
       
    if (
$verb == 'POST' && !empty($postdata_str))
    {
       
$postdata_str = substr($postdata_str, 0, -1);
       
$req .= 'Content-Type: application/x-www-form-urlencoded' . $crlf;
       
$req .= 'Content-Length: '. strlen($postdata_str) . $crlf . $crlf;
       
$req .= $postdata_str;
    }
    else
$req .= $crlf;
   
    if (
$req_hdr)
       
$ret .= $req;
   
    if ((
$fp = @fsockopen($ip, $port, $errno, $errstr)) == false)
        return
"Error $errno: $errstr\n";
   
   
stream_set_timeout($fp, 0, $timeout * 1000);
   
   
fputs($fp, $req);
    while (
$line = fgets($fp)) $ret .= $line;
   
fclose($fp);
   
    if (!
$res_hdr)
       
$ret = substr($ret, strpos($ret, "\r\n\r\n") + 4);
   
    return
$ret;
}
?>

Example usages :

<?php
echo http_request('GET', 'www.php.net');
echo
http_request('GET', 'www.php.net', 80, '/manual/en/function.phpinfo.php');
echo
http_request('GET', 'www.php.net', 80, '/manual/en/function.phpinfo.php', array('get1' => 'v_get1'), array(), array('cookie1' => 'v_cookie1'), array('X-My-Header' => 'My Value'));
?>

[EDIT BY danbrown AT php DOT net: Contains a bugfix provided by "Wrinkled Cheese" on 24-JUN-2011 to fix the $getdata foreach() loop; another bugfix provided by Suat Secmen on 12-JAN-2012 to fix a $timeout = 1000, then stream_set_timeout($fp, 0, $timeout * 1000), equaling 1,000 seconds.]
up
1
richardaburton at hotmail dot com
20 years ago
Improved HTTP/1.1 chunked transfer-encoding example.

The sample code given below by Jack does not function correctly when run against a recent version of Apache (I'm assuming that this did once work, but from the HTTP/1.1 spec I can only assume if it did work it was based mostly on luck).

<?php

$header
= "";
$response = "";

// connect
if (!($request=fsockopen('example.com',80,$errno,$errstr))) exit($errstr);
else {
  
socket_set_timeout($request,10);
  
// send request
  
fwrite($request,$post);
  
// get header
  
do $header.=fread($request,1); while (!preg_match('/\\r\\n\\r\\n$/',$header));
  
// check for chunked encoding
  
if (preg_match('/Transfer\\-Encoding:\\s+chunked\\r\\n/',$header))
      do {
        
$byte = "";
        
$chunk_size="";
         do {
           
$chunk_size.=$byte;
           
$byte=fread($request,1);
         } while (
$byte!="\\r");      // till we match the CR
        
fread($request, 1);         // also drop off the LF
        
$chunk_size=hexdec($chunk_size); // convert to real number
        
$response.=fread($request,$chunk_size);
        
fread($request,2);          // ditch the CRLF that trails the chunk
     
} while ($chunk_size);         // till we reach the 0 length chunk (end marker)
  
else {
     
// check for specified content length
     
if (preg_match('/Content\\-Length:\\s+([0-9]*)\\r\\n/',$header,$matches)) {
        
$response=fread($request,$matches[1]);
      } else {
        
// not a nice way to do it (may also result in extra CRLF which trails the real content???)
        
while (!feof($request)) $response .= fread($request, 4096);
      }
   }
  
// close connection
  
fclose($request);
}

// do something useful with the response
print($header);
print(
$response);

?>

Richard.
up
2
p14nd4
9 years ago
It appears that in PHP 5.6.0 (at least the version in Debian jessie, with openssl 1.0.1h-3), this function *is* now validating SSL certificates (in a variety of ways). First, it appears to fail for untrusted certificates (i.e. no matching CA trusted locally), and secondly, it appears to fail for mismatched hostnames in the request and certificate.

---------
$ echo "<?php echo fsockopen(\"ssl://localhost\", 993); ?>" | php -a
Interactive mode enabled

PHP Warning
fsockopen(): Peer certificate CN=`my.test.server' did not match expected CN=`localhost' in - on line 1
PHP Warning:  fsockopen(): Failed to enable crypto in - on line 1
PHP Warning:  fsockopen(): unable to connect to ssl://localhost:993 (Unknown error) in - on line 1
----------
$ echo "<?php echo fsockopen(\"ssl://my.test.server\", 993); ?>" | php -a
Interactive mode enabled

PHP Warning:  fsockopen(): SSL operation failed with code 1. OpenSSL Error messages:
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed in - on line 1
PHP Warning:  fsockopen(): Failed to enable crypto in - on line 1
PHP Warning:  fsockopen(): unable to connect to ssl://my.test.server:993 (Unknown error) in - on line 1
---------
#installed CA locally
---------
$ echo "<?php echo fsockopen(\"ssl://my.test.server\", 993); ?>" | php -a
Interactive mode enabled

Resource id #1
up
1
iain at monitormedia dot co dot uk
21 years ago
Here's how to send an email using SMTP. This includes rudimentary checking on server responses during the process of sending an email. Could be improved by more comprehensive processing of the result codes...or going on to the next mail exchanger when you fail after connecting to the first.

<?php

function another_mail($to,$subject,$headers,$message)
{
// Could get this from the php ini?
$from="me@example.com";
list(
$me,$mydomain) = split("@",$from);

// Now look up the mail exchangers for the recipient
list($user,$domain) = split("@",$to,2);
if(
getmxrr($domain,$mx,$weight) == 0)  return FALSE;

// Try them in order of lowest weight first
array_multisort($mx,$weight);
$success=0;

foreach(
$mx as $host) {
 
// Open an SMTP connection
 
$connection = fsockopen ($host, 25, $errno, $errstr, 1);
  if (!
$connection)
    continue;
 
$res=fgets($connection,256);
  if(
substr($res,0,3) != "220") break;

 
// Introduce ourselves
 
fputs($connection, "HELO $mydomain\n");
 
$res=fgets($connection,256);
  if(
substr($res,0,3) != "250") break;

 
// Envelope from
 
fputs($connection, "MAIL FROM: $from\n");
 
$res=fgets($connection,256);
  if(
substr($res,0,3) != "250") break;

 
// Envelope to
 
fputs($connection, "RCPT TO: $to\n");
 
$res=fgets($connection,256);
  if(
substr($res,0,3) != "250") break;

 
// The message
 
fputs($connection, "DATA\n");
 
$res=fgets($connection,256);
  if(
substr($res,0,3) != "354") break;

 
// Send To:, From:, Subject:, other headers, blank line, message, and finish
  // with a period on its own line.
 
fputs($connection, "To: $to\nFrom: $from\nSubject: $subject\n$headers\n\n$message\n.\n");
 
$res=fgets($connection,256);
  if(
substr($res,0,3) != "250") break;

 
// Say bye bye
 
fputs($connection,"QUIT\n");
 
$res=fgets($connection,256);
  if(
substr($res,0,3) != "221") break;

 
// It worked! So break out of the loop which tries all the mail exchangers.
 
$success=1;
  break;
}
// Debug for if we fall over - uncomment as desired
// print $success?"Mail sent":"Failure: $res\n";
if($connection) {
  if(
$success==0) fputs($connection, "QUIT\n");
 
fclose ($connection);
}
return
$success?TRUE:FALSE;
}

another_mail("recipient@example.com","My Subject","X-mailer: PHP Script\nX-another-header: Whatever","Test email body.\n\nNote if you actually put a period on a line\nby itself, the function will terminate prematurely.\n\nYou will get a partial email sent though.\n");
?>
up
0
Goce Dokoski
5 years ago
Trying to fsockopen an ssl:// connection, but it was hanging for a long time, ignoring timeout parameter, and eventually returning false, without an error message.

Turns out (at least) on Windows it validates certificates and doesn't have a valid certificate store.

This worked for me:

- download Mozilla's certificate store from https://curl.haxx.se/ca/cacert.pem
- copy it inside php installation (for example: c:\php)
- and set it up in php.ini
       
              openssl.cafile="c:\php\cacert.pem"

My system: Apache/2.4.29 (Win64) OpenSSL/1.0.2n PHP/5.6.38
up
0
perrya at shoalhaven dot nsw dot gov dot au
8 years ago
on my FreeBSD vm, with Joomla, I was getting the error

fsockopen(): unable to connect to ssl://localhost:443 (Unknown error)

when using a contact form and also the module updating process.

After reading other notes on here, regarding certificate validation, I installed the port ca_root_nss

(Root certificates from certificate authorities included in the Mozilla
NSS library and thus in Firefox and Thunderbird.)

Now it works
up
0
gratcypalma at gmail dot com
13 years ago
<?php
/*
this script i used for remote my PvPGN Server, to check email user.
not good, but it work.
*/

set_time_limit(0);
$host   = 'host';
$port   = 'port';
$user   = 'user';
$pass   = 'pass';
$socket = fsockopen($host, $port) or die('Could not connect to: '.$host);
$userdota = "palma";
if(
$socket)
{
   
sendcmd("\r",$socket);
   
$status = "open"; // set status open
       
   
while($status=="open") //while we are connected to the server
     
{    
            
$line = @fgets($socket, 1024) ;
             
/////////////login////////////////   
           
if (strstr($line, "there is no guest account"))
              {
                
sendcmd($user."\r\n",$socket);
                
sendcmd($pass."\r\n",$socket);
              }   
           
//////////////send command ////////////////////
           
if (strstr($line,"Your unique name: ".$user))
              { 
sendcmd("/finger ".$userdota."\r\n",$socket);
              }
           
           
//////////////get email////////////////////
           
if (strstr($line,"email:")) // if respone server write "email:"
             

                
$pattern = '/email:(.*) ,/';
                
preg_match($pattern, $line, $matches);
                
fclose($socket);
                
$status="close"; // status close
                
$matches=str_replace(" ","", $matches);
                
$matches=str_replace(",is_operator:0,is_admin:0,","", $matches);
                
$matches=str_replace("email:","", $matches);
                 print
$matches[0];                
                
$email=$matches[0];
              }
            if (
strstr($line,"ERROR: Invalid user.")) // if respone server write "ERROR: Invalid user."
             

                
                
fclose($socket);
                
$status="close";
                
$error ="Invalid User";    // error message
             
}
           
           
////////////login failed //////////////////////////            
           
if (strstr($line, "Login failed")) // if respone server write "Login failed"
             
{
                
$error = "Login Failed";    // error message
                
fclose($socket);
                
$status="close";
              }
           
           
flush(); // close
     
     
}
         
}
function
sendcmd($cmd,$socket) // send command function
{
 
fputs($socket, $cmd, strlen($cmd));
}
?>
up
0
walter
14 years ago
For some reason the default FreeBSD 7.0 port (jailed environment) breaks fsockopen() on SSL URLs, returning a constant stream of nothing!  In my case this resulted in php-cgi bringing down lighttpd completely, in rapid time!  Avoid FreeBSD/jails/fsockopen + SSL.  Use curl_init() instead.
up
0
oliver dot christen at camptocamp dot com
14 years ago
When downloading large files, it is not really efficient to put the whole server answer in memory before parsing the data to remove the header parts. Here is a simple way to do it while writing the data as it arrive:

<?php

// $socket is a valid fsockopen handle

$out = '';
$headerendfound = false;
$fp = fopen($fileTarget, 'w');
$buffer = '';
while (!
feof($socket)) {
   
$out = fgets ($socket,16384);
    if (
$headerendfound) {
       
fwrite($fp, $out);
        print
'.';
    }
    if (!
$headerendfound) {
       
$buffer .= $out;
        print
"searching for header\n";
       
$headerend = strpos($buffer, "\r\n\r\n");
        if (
$headerend !== false) {
           
$headerendfound = true;
           
fwrite($fp, substr($buffer, $headerend+4));
           
$buffer = '';
        }
    }
}
fclose($fp);
fclose($socket);

?>
up
-1
GreenReaper
4 years ago
PHP (or OpenSSL) may not always choose to use e.g. TLS 1.2, but you can force it to with tlsv1.2://
https://docs.php.net/manual/en/migration56.openssl.php#migration56.openssl.crypto-method

This was a great help to me, given Twitter's recent API changes to require TLS 1.2+.
up
0
mikey at badpenguins dot com
15 years ago
My $0.02 on handling chunked transfer encoded output...  Has rudimentary error handling.

<?php
//
// Example usage...
//
$server  = '127.0.0.1';
$port    = '80';
$uri     = '/cgi-bin/random-cgi';
$content = 'Your post content...';

$post_results = httpPost($server,$port,$uri,$content);
if (!
is_string($post_results)) {
    die(
'uh oh, something went wrong');
    } else {
    die(
'Here are your results: ' . $post_results);
    }

//
// Post provided content to an http server and optionally
// convert chunk encoded results.  Returns false on errors,
// result of post on success.  This example only handles http,
// not https.
//
function httpPost($ip=null,$port=80,$uri=null,$content=null) {
    if (empty(
$ip))         { return false; }
    if (!
is_numeric($port)) { return false; }
    if (empty(
$uri))        { return false; }
    if (empty(
$content))    { return false; }
   
// generate headers in array.
   
$t   = array();
   
$t[] = 'POST ' . $uri . ' HTTP/1.1';
   
$t[] = 'Content-Type: text/html';
   
$t[] = 'Host: ' . $ip . ':' . $port;
   
$t[] = 'Content-Length: ' . strlen($content);
   
$t[] = 'Connection: close';
   
$t   = implode("\r\n",$t) . "\r\n\r\n" . $content;
   
//
    // Open socket, provide error report vars and timeout of 10
    // seconds.
    //
   
$fp  = @fsockopen($ip,$port,$errno,$errstr,10);
   
// If we don't have a stream resource, abort.
   
if (!(get_resource_type($fp) == 'stream')) { return false; }
   
//
    // Send headers and content.
    //
   
if (!fwrite($fp,$t)) {
       
fclose($fp);
        return
false;
        }
   
//
    // Read all of response into $rsp and close the socket.
    //
   
$rsp = '';
    while(!
feof($fp)) { $rsp .= fgets($fp,8192); }
   
fclose($fp);
   
//
    // Call parseHttpResponse() to return the results.
    //
   
return parseHttpResponse($rsp);
    }

//
// Accepts provided http content, checks for a valid http response,
// unchunks if needed, returns http content without headers on
// success, false on any errors.
//
function parseHttpResponse($content=null) {
    if (empty(
$content)) { return false; }
   
// split into array, headers and content.
   
$hunks = explode("\r\n\r\n",trim($content));
    if (!
is_array($hunks) or count($hunks) < 2) {
        return
false;
        }
   
$header  = $hunks[count($hunks) - 2];
   
$body    = $hunks[count($hunks) - 1];
   
$headers = explode("\n",$header);
    unset(
$hunks);
    unset(
$header);
    if (!
verifyHttpResponse($headers)) { return false; }
    if (
in_array('Transfer-Encoding: chunked',$headers)) {
        return
trim(unchunkHttpResponse($body));
        } else {
        return
trim($body);
        }
    }

//
// Validate http responses by checking header.  Expects array of
// headers as argument.  Returns boolean.
//
function validateHttpResponse($headers=null) {
    if (!
is_array($headers) or count($headers) < 1) { return false; }
    switch(
trim(strtolower($headers[0]))) {
        case
'http/1.0 100 ok':
        case
'http/1.0 200 ok':
        case
'http/1.1 100 ok':
        case
'http/1.1 200 ok':
            return
true;
        break;
        }
    return
false;
    }

//
// Unchunk http content.  Returns unchunked content on success,
// false on any errors...  Borrows from code posted above by
// jbr at ya-right dot com.
//
function unchunkHttpResponse($str=null) {
    if (!
is_string($str) or strlen($str) < 1) { return false; }
   
$eol = "\r\n";
   
$add = strlen($eol);
   
$tmp = $str;
   
$str = '';
    do {
       
$tmp = ltrim($tmp);
       
$pos = strpos($tmp, $eol);
        if (
$pos === false) { return false; }
       
$len = hexdec(substr($tmp,0,$pos));
        if (!
is_numeric($len) or $len < 0) { return false; }
       
$str .= substr($tmp, ($pos + $add), $len);
       
$tmp  = substr($tmp, ($len + $pos + $add));
       
$check = trim($tmp);
        } while(!empty(
$check));
    unset(
$tmp);
    return
$str;
    }

?>
up
0
jabeba at web dot de
15 years ago
If you have to use a proxy to make requests outside of your local network, you may use this class:

<?php
/*
*
* No Proxy Authentification Implemented; PHP 5
*
*/

class RemoteFopenViaProxy {

    private
$result;
    private
$proxy_name;
    private
$proxy_port;
    private
$request_url;

    public function
get_proxy_name() {
        return
$this->proxy_name;
    }

    public function
set_proxy_name($n) {
       
$this->proxy_name = $n;
    }

    public function
get_proxy_port() {
        return
$this->proxy_port;
    }

    public function
set_proxy_port($p) {
       
$this->proxy_port = $p;
    }

    public function
get_request_url() {
        return
$this->request_url;
    }

    public function
set_request_url($u) {
       
$this->request_url = $u;
    }

    public function
get_result() {
        return
$this->result;
    }

    public function
set_result($r) {
       
$this->result = $r;
    }

    private function
get_url_via_proxy() {

       
$proxy_fp = fsockopen($this->get_proxy_name(), $this->get_proxy_port());

        if (!
$proxy_fp) {
            return
false;
        }
       
fputs($proxy_fp, "GET " . $this->get_request_url() . " HTTP/1.0\r\nHost: " . $this->get_proxy_name() . "\r\n\r\n");
        while (!
feof($proxy_fp)) {
           
$proxy_cont .= fread($proxy_fp, 4096);
        }
       
fclose($proxy_fp);
       
$proxy_cont = substr($proxy_cont, strpos($proxy_cont, "\r\n\r\n") + 4);
        return
$proxy_cont;

    }

    private function
get_url($url) {
       
$fd = @ file($url);
        if (
$fd) {
            return
$fd;
        } else {
            return
false;
        }
    }

    private function
logger($line, $file) {
       
$fd = fopen($file . ".log", "a+");
       
fwrite($fd, date("Ymd G:i:s") . " - " . $file . " - " . $line . "\n");
       
fclose($fd);
    }

    function
__construct($url, $proxy_name = "", $proxy_port = "") {

       
$this->set_request_url($url);
       
$this->set_proxy_name($proxy_name);
       
$this->set_proxy_port($proxy_port);

    }

    public function
request_via_proxy() {

       
$this->set_result($this->get_url_via_proxy());
        if (!
$this->get_result()) {
           
$this->logger("FAILED: get_url_via_proxy(" . $this->get_proxy_name() . "," . $this->get_proxy_port() . "," . $this->get_request_url() . ")", "RemoteFopenViaProxyClass.log");
        }
    }

    public function
request_without_proxy() {

       
$this->set_result($this->get_url($this->get_request_url()));
        if (!
$this->get_result()) {
           
$this->logger("FAILED: get_url(" . $url . ")", "RemoteFopenViaProxyClass.log");
        }
    }
}
?>

Use it this way:

<?php
// call constructor
$obj = new RemoteFopenViaProxy($insert_request_url, $insert_proxy_name, $insert_proxy_port);
// change settings after object generation
$obj->set_proxy_name($insert_proxy_name);
$obj->set_proxy_port($insert_proxy_port);
$obj->set_request_url($insert_request_url);
$obj->request_via_proxy();
echo
$obj->get_result();
?>

If there are errors during execution, the script tries to write some useful information into a log file.
up
0
huli0401 at gmail dot com
16 years ago
<?php
// Check for new version
   
$current_version = explode('.', '1.0.00');
   
$minor_revision = (int) $current_version[2];

   
$errno = 0;
   
$errstr = $version_info = '';

    if (
$fsock = fsockopen("www.exanmple.eu", 80, $errno, $errstr, 30))
    {
        @
fputs($fsock, "GET /ver.txt HTTP/1.1\r\n");
        @
fputs($fsock, "HOST: www.example.eu\r\n");
        @
fputs($fsock, "Connection: close\r\n\r\n");

       
$get_info = false;
        while (!@
feof($fsock))
        {
            if (
$get_info)
            {
               
$version_info .= @fread($fsock, 1024);
            }
            else
            {
                if (@
fgets($fsock, 1024) == "\r\n")
                {
                   
$get_info = true;
                }
            }
        }
        @
fclose($fsock);

       
$version_info = explode("\n", $version_info);
       
$latest_head_revision = (int) $version_info[0];
       
$latest_minor_revision = (int) $version_info[2];
       
$latest_version = (int) $version_info[0] . '.' . (int) $version_info[1] . '.' . (int) $version_info[2];

        if (
$latest_head_revision == 2 && $minor_revision == $latest_minor_revision)
        {
           
$version_info = '<p style="color:green">OK</p>';
        }
        else
        {
           
$version_info = '<p style="color:red">neaktualne';
           
$version_info .= '<br />'Latest_version_info' . $latest_version) . ' ' . sprintf(Current_version_info'. '1.0.00') . '</p>';
        }
    }
    else
    {
        if (
$errstr)
        {
           
$version_info = '<p style="color:red">' . sprintf(Connect_socket_error) . '</p>';
        }
        else
        {
           
$version_info = '<p>'Socket_functions_disabled'</p>';
        }
    }
   
   
$version_info .= '<p>'Mailing_list_subscribe_reminder'</p>';

echo
$version_info;
?>
up
0
bradland at umich dot edu
16 years ago
I was having trouble doing an https in fopen and with fsockopen where the address had ssl://.  I was getting error code 114 in the log.  After much research i found that there was some ssl conflict trouble with MySQL 5.0.20-5.0.33.  It had some functions that were interfering with openssl that showed up in the php install.

http://bugs.mysql.com/bug.php?id=21930
http://bugs.mysql.com/bug.php?id=19289
up
0
jack at jtr dot de
20 years ago
Here is a function for testing a website/URI for availability:

<?php
   
/*
    * @return boolean
    * @param  string $link
    * @desc   berprft die angegeben URL auf Erreichbarkeit (HTTP-Code: 200)
    */
   
function url_validate( $link )
    {       
       
$url_parts = @parse_url( $link );

        if ( empty(
$url_parts["host"] ) ) return( false );

        if ( !empty(
$url_parts["path"] ) )
        {
           
$documentpath = $url_parts["path"];
        }
        else
        {
           
$documentpath = "/";
        }

        if ( !empty(
$url_parts["query"] ) )
        {
           
$documentpath .= "?" . $url_parts["query"];
        }

       
$host = $url_parts["host"];
       
$port = $url_parts["port"];
       
// Now (HTTP-)GET $documentpath at $host";

       
if (empty( $port ) ) $port = "80";
       
$socket = @fsockopen( $host, $port, $errno, $errstr, 30 );
        if (!
$socket)
        {
            return(
false);
        }
        else
        {
           
fwrite ($socket, "HEAD ".$documentpath." HTTP/1.0\r\nHost: $host\r\n\r\n");
           
$http_response = fgets( $socket, 22 );
           
            if (
ereg("200 OK", $http_response, $regs ) )
            {
                return(
true);
               
fclose( $socket );
            } else
            {
//                echo "HTTP-Response: $http_response<br>";
               
return(false);
            }
        }
    }
?>
up
0
terminal
20 years ago
Try this.
Use AUTH when necessary.
Read RFC 821 when having problems.

<?php

    $handle
= smtp_connect($smtp_server, 25, 30, 1, 1, 1);
    echo
smtp_command($handle, "EHLO $domain\r\n", 1, 1);
    echo
smtp_command($handle, "MAIL FROM:<$from_mail>\r\n", 1, 1);
    echo
smtp_command($handle, "RCPT TO:<$to_mail>\r\n", 1, 1);
    echo
smtp_command($handle, "DATA\r\n", 1, 1);
    echo
smtp_command($handle, "$message\r\n.\r\n", 1, 1);
   
// don't do it like this - it will hang up
    // echo smtp_command($handle, "$message", 1, 1);
    // echo smtp_command($handle, "\r\n.\r\n", 1, 1);
   
echo smtp_command($handle, "QUIT\r\n", 1, 1);
   
smtp_close($handle);
   
   
    function
smtp_connect($host, $port, $timeout=30, $echo_command=False, $echo_response=False, $nl2br=False)
    {
       
$errno = 0;
       
$errstr = 0;
        if(
$echo_command)
        {
            if(
$nl2br) { echo nl2br("CONNECTING TO $host\r\n"); }
            else { echo
"CONNECTING TO $host\r\n"; }
        }
       
$handle = fsockopen($host, $port, $errno, $errstr, $timeout);
        if(!
$handle)
        {
            if(
$echo_command)
            {
                if(
$nl2br) { echo nl2br("CONNECTION FAILED\r\n"); }
                else { echo
"CONNECTION FAILED\r\n"; }
            }
            return
False;
        }
        if(
$echo_command)
        {
            if(
$nl2br) { echo nl2br("SUCCESS\r\n"); }
            else { echo
"SUCCESS\r\n"; }
        }
       
$response = fgets($handle,1);
       
$bytes_left = socket_get_status($handle);
        if (
$bytes_left > 0) { $response .= fread($handle, $bytes_left["unread_bytes"]); }
        if(
$echo_response)
        {
            if(
$nl2br) { echo nl2br($response); }
            else { echo
$response; }
        }
        return
$handle;
    }

    function
smtp_command($handle, $command, $echo_command=False, $nl2br=False)
    {
        if(
$echo_command)
        {
            if(
$nl2br) { echo nl2br($command); }
            else { echo
$command; }
        }
       
fputs($handle, $command);
       
$response = fgets($handle,1);
       
$bytes_left = socket_get_status($handle);
        if (
$bytes_left > 0) { $response .= fread($handle, $bytes_left["unread_bytes"]); }
        if(
$nl2br) { return nl2br($response); }
        else { return
$response; }
    }
   
    function
smtp_close($handle)
    {
       
fclose($handle);
    }
?>
up
0
xbensemhoun at t-systems dot fr
20 years ago
To make a telnet connection with a Cisco router:

<?php
$cfgServer
= "nnn.nnn.nnn.nnn"//IP of your router
$cfgPort    = 23;                //port, 22 if SSH
$cfgTimeOut = 10;

$usenet = fsockopen($cfgServer, $cfgPort, $errno, $errstr, $cfgTimeOut);

if(!
$usenet)
        {
        echo
"Connexion failed\n";
        exit();
        }
else
        {
        echo
"Connected\n<BR>";
       
fputs ($usenet, "toto\r\n");
       
fputs ($usenet, "en\r\n");
       
fputs ($usenet, "tutu\r\n");
       
fputs ($usenet, "exit\r\n");
        while (!
feof($usenet))
                {
                echo
". ".fgets($usenet, 128)."<BR>\n";
                }
        }
?>

Then you will have:
Connected
. ��������
.
. User Access Verification
.
. Password:
. testXB>en
. Password:
. testXB#exit
.
up
0
Sherif Gayed
21 years ago
Here is how to connect to the web from behind a proxy server:

<?php
/*************start code**************/
/*your proxy server address*/
$proxy = "192.168.10.1";
/*your proxy server port*/
$port = 8080;
/*the url you want to connect to*/
$url = "http://www.php.net/";
$fp = fsockopen($proxy, $port);
fputs($fp, "GET $url HTTP/1.0\r\nHost: $proxy\r\n\r\n");
while(!
feof($fp)){
 
$line = fgets($fp, 4000);
  print(
$line);
}
fclose($fp);
/**************end code**************/
?>
up
0
dan at lovepond dot com
21 years ago
Here is some code to help out abit more with the EOF problem.
I had a problem where I needed to strip out so many lines of server input to get back right data i wanted.

<?php
$port
=4000;
$host="localhost";
$message="test";
$status=senddata($host,$port,$message);
print
"$status";

function
senddata($host,$port,$message) {

#takes in account servers that do not return EOF character
#send data to server and get back input

#function globals
$linenumber="2"; #amount of lines to get rid of before we give input
$lineamount="1"; #amount of lines to read after we give input

$fp = fsockopen("$host", $port, $errno, $errstr, 30);
if (!
$fp) {
   echo
"$errstr ($errno)";
}
else {
   for (
$i = 1; $i < $linenumber+1; $i++) {
     
fread ($fp,1);
     
$bytes_left = socket_get_status($fp);
      if (
$bytes_left > 0) { fread($fp, $bytes_left[unread_bytes]); }
   }
  
fputs($fp, "$message\r\n");
   for (
$i = 1; $i < $lineamount+1; $i++) {
     
$status.=fread($fp,1);
     
$bytes_left = socket_get_status($fp);
      if (
$bytes_left > 0) { $status.=fread($fp, $bytes_left[unread_bytes]); }
   }
  
fclose ($fp);
}

return
$status;
}

?>
up
-2
biguenique at yahoo dot ca
10 years ago
Did you know that fsockopen() DOES NOT validate SSL certificates whatsoever? For the sake of World's overall security level, I guess it would be a very positive idea to add a BIG WARNING notice on the manual page!

Citing the extensive study  titled "The Most Dangerous Code in the World: Validating SSL Certificates in Non-Browser Software" published in 2012 (google it if they removed the link) on page 5:

"PHP provides several methods for establishing SSL connections. For example, fsockopen, which opens a raw socket to the remote server, can be used to connect to SSL servers by putting “ssl://” in the URL. Even though fsockopen does not perform any certificate checks whatsoever, PHP application developers routinely use it for SSL connection establishment (see Section 9)."

For proper certificate validation with some level of ease, you can always move to cURL, but be careful:

"PHP also provides a cURL binding, which uses cURL’s default settings to establish SSL connections with proper certificate validation. As we show in Sections 7.1, 7.2, and 7.3, application developers often set cURL options incorrectly, overriding the defaults and breaking certificate validation."

For more detailed insights, try out the following code:
<?php readfile("http".str_replace('+', '.', implode('/', array(":", null, "www+cs+utexas+edu", "~shmat", "shmat_ccs12.pdf")))); ?>
To Top