natsort
regarding references with foreach, you can use them directly. Obviating various posts which provide many lines of 'work arounds'.
$array = array(1,2,3,4,5);
foreach($array as &$value)
or use $key
foreach($array as $key => $value)
{
$array[$key] = '...';
}
next
(PHP 4, PHP 5)
next — Dahili dizi göstericisini bir ilerletir
Açıklama
next() işlevi bir farkla current() işlevi gibi davranır. Eleman değerini döndürmeden önce dahili dizi göstericisini bir ileri taşır. Yani farklı olarak dahili dizi göstericisini bir ilerlettikten sonra, current() işlevindeki gibi dahili dizi göstericisinin gösterdiği elemanın değerini döndürür.
Değiştirgeler
-
dizi -
Göstericisi konumlanacak dizi.
Dönen Değerler
Dizinin dahili göstericisinin bulunduğu konumun bir sonrasında eleman varsa
o elemanın değeri döner, yoksa FALSE döner.
Uyarı
Bu işlev mantıksal FALSE
değeriyle dönebileceği gibi FALSE olarak değerlendirilebilecek mantıksal
olmayan bir değerle de dönebilir. Bu konuda daha fazla bilgi edinmek için
Mantıksal Değerler bölümüne
bakabilirsiniz. Bu işlevden dönen değeri sınamak için
===
işlecini kullanınız.
Örnekler
Örnek 1 - next() ve şürekası
<?php
$araç = array('tabanvay', 'bisiklet', 'otomobil', 'uçak');
$kip = current($araç); // $kip = 'tabanvay';
$kip = next($araç); // $kip = 'bisiklet';
$kip = next($araç); // $kip = 'otomobil';
$kip = prev($araç); // $kip = 'bisiklet';
$kip = end($araç); // $kip = 'uçak';
?>
Notlar
Bilginize: Bir dizinin sonundaki elemanın değerinin boolean
FALSEolup olmadığını anlayamazsınız.FALSEdeğerli elemanlar içeren bir dizide bilinçli olarak ilerlemenin en doğru yolu each() kullanmaktır.
Ayrıca Bakınız
- current() - Bir diziden gösterici konumundaki elemanı döndürür
- end() - Bir dizinin dahili göstericisini sonuncu elemana konumlandırır
- prev() - Dahili dizi göstericisini bir geriletir
- reset() - Bir dizinin dahili göstericisini ilk elemana konumlar
- each() - Bir diziden, gösterici konumundaki anahtar değer çiftini döndürdükten sonra göstericiyi bir ilerletir
add a note
User Contributed Notes
next - [16 notes]
ThinkMedical at Gmail dot com ¶
4 years ago
bty-adminf2 at trebly dot net ¶
11 months ago
Note that to display the "array_values" into an html page, you must simply write like this (example with a call to soapClient::__getFunctions()) :
<?php
// .... set new $soap
$result = $soap->__getFunctions();
echo('<pre>');
print_r(array_values($result));
echo('</pre>');
?>
This just because the "array_values" returns a PRE formatted text with CR and blanks chars.
The best is to create into a library the function
<?php
function array_values2html($theArray=array()) {
echo('<pre>');
print_r(array_values($result));
echo('</pre>');
?>
Remember : "print_r" writes without parameter into the buffer. If you want to get back the content string you must use the $return parameter. So an alternate syntax (more compact) is :
<?php
// .... set new $soap
$result = $soap->__getFunctions();
echo('<pre>'.print_r(array_values($result,true).'</pre>');
?>
and for the function :
<?php
function array_values2html($theArray=array()) {
return '<pre>').print_r(array_values($theArray,true).'</pre>';
}
?>
Finally you will write generally in your compacted code :
<?php
// ... set $result as array
echo (array_values2html($result));
?>
lukasz at karapuda dot com ¶
8 years ago
This function will return the previous,next neighbors of an array entry within an associative array. If the specified $key points to the last or first element of the array, the first or last keys of the array will be returned consecutively. This is an improved version of the same function posted earlier.
<?php
function array_neighbor($arr, $key)
{
$keys = array_keys($arr);
$keyIndexes = array_flip($keys);
$return = array();
if (isset($keys[$keyIndexes[$key]-1])) {
$return[] = $keys[$keyIndexes[$key]-1];
}
else {
$return[] = $keys[sizeof($keys)-1];
}
if (isset($keys[$keyIndexes[$key]+1])) {
$return[] = $keys[$keyIndexes[$key]+1];
}
else {
$return[] = $keys[0];
}
return $return;
}
?>
brentimus ¶
8 years ago
Papipo's function below is usefull in concept but does not work.
"Since you do not pass the array by reference, its pointer is only moved inside the function."
This is true, but the array you are manipulating in your has_next() function will have it's pointer set to the first element, not the same position as the original array. What you want to do is pass the array to the has_next() function via reference. While in the has_next() function, make a copy of the array to work on. Find out the current pointer position of the original array and set the pointer on the working copy of the array to the same element. Then you may test to see if the array has a "next" element.
Try the followig insetad:
<?php
function has_next(&$array)
{
$A_work=$array; //$A_work is a copy of $array but with its internal pointer set to the first element.
$PTR=current($array);
array_set_pointer($A_work, $PTR);
if(is_array($A_work))
{
if(next($A_work)===false)
return false;
else
return true;
}
else
return false;
}
function array_set_pointer(&$array, $value)
{
reset($array);
while($val=current($array))
{
if($val==$value)
break;
next($array);
}
}
?>
court shrock ¶
9 years ago
This code returns neighbors of the specified key. The result will be empty if it doesn't have any neighbors. My approach was to use the order of keys to determine neighbors, which is differnet from just getting the next/previous element in an array. Feel free to point out stupidities :)
<?php
function array_neighbor($arr, $key)
{
krsort($arr);
$keys = array_keys($arr);
$keyIndexes = array_flip($keys);
$return = array();
if (isset($keys[$keyIndexes[$key]-1]))
$return[] = $keys[$keyIndexes[$key]-1];
if (isset($keys[$keyIndexes[$key]+1]))
$return[] = $keys[$keyIndexes[$key]+1];
return $return;
}
?>
double at dumpit dot de ¶
3 years ago
PHP: 5.2.10-2ubuntu6.3 (default apt-get installation on actual, see Date, jaunty 9.10 Ubuntu Distro - G33kWoRDs)
Have a look at your array pointer if you copy an array - the pointer will be copied, too.
For example if you got this construct:
<?php
$array = array('zero','one','two','three','four','five','six','seven');
$array2 = $array;
next($array);
echo key($array);
echo key($array2);
// will output:
// 1
// 0
?>
But if you copy the array after you've setted the pointer, the pointer will be copied, too:
<?php
$array = array('zero','one','two','three','four','five','six','seven');
next($array);
$array2 = $array;
echo key($array);
echo key($array2);
// will output:
// 1
// 1
?>
What's more is, that foreach not resetting the pointer after walk through:
<?php
$array = array('zero','one','two','three','four','five','six','seven');
next($array);
$array2 = array();
foreach($array AS $key => $value){
echo $key;
$array2[$key] = $value;
}
echo var_dump(key($array));
echo key($array2);
// will output for foreach:
// 0 1 2 3 4 5 6 7
// and for the keys
// NULL
// 0
?>
The php-functions seems to reset the pointer on the given position after walk through (i don't know the internal handling - there could be used a copy of the array, too):
<?php
$array = array('zero','one','two','three','four','five','six','seven');
next($array);
$array2 = array_values($array);
echo key($array);
echo key($array2);
// will output:
// 1
// 0
?>
There are a lot Methods like array_merge($array) that will neither reset the pointer of $array nor copy the pointer to $array2. Have a look on this.
I Hope this was a little helpfull.
darkside at i dot ua ¶
5 years ago
This class implements simple operations with array
<?php
class Steps {
private $all;
private $count;
private $curr;
public function __construct () {
$this->count = 0;
}
public function add ($step) {
$this->count++;
$this->all[$this->count] = $step;
}
public function setCurrent ($step) {
reset($this->all);
for ($i=1; $i<=$this->count; $i++) {
if ($this->all[$i]==$step) break;
next($this->all);
}
$this->curr = current($this->all);
}
public function getCurrent () {
return $this->curr;
}
public function getNext () {
self::setCurrent($this->curr);
return next($this->all);
}
}
?>
usage example:
<?php
$steps = new Steps();
$steps->add('one');
$steps->add('two');
$steps->add('three');
$steps->setCurrent('one');
echo $steps->getCurrent()."<br />";
echo $steps->getNext()."<br />";
$steps->setCurrent('two');
echo $steps->getCurrent()."<br />";
echo $steps->getNext()."<br />";
?>
gg2005 at gmail dot com ¶
6 years ago
Don't confuse next with continue!
If you're a Perl developer starting with PHP, you might try to use "next" inside a loop to skip to the next iteration...
i.e.,
foreach ($things as $thing) {
if (something I don't like about $thing) {
next;
}
blah....
}
The php compiler will take next... but it's not going to work.
Do this instead:
foreach ($things as $thing) {
if (something I don't like about $thing) {
continue;
}
blah....
}
papipo's gmail account ¶
8 years ago
I need to know if an array has more items, but without moving array's internail pointer. Thats is, a has_next() function:
<?php
function has_next($array) {
if (is_array($array)) {
if (next($array) === false) {
return false;
} else {
return true;
}
} else {
return false;
}
}
$array = array('fruit', 'melon');
if (has_next($array)) {
echo next($array);
}
// prints 'melon'
?>
Since you do not pass the array by reference, its pointer is only moved inside the function.
Hope that helps.
Sigmar ¶
6 years ago
If you want to check, if there are some more elements in array after given key, you can use the following function:
function more_array_keys($keyname, &$array) {
if (!is_array($array)) {
return false;
}
if (empty($keyname)) {
return false;
}
$set = false;
$count = 0;
foreach ($array as $key => $value) {
if ($set === true) {
$count++;
}
if ($key == $keyname) {
$set = true;
}
}
return $count > 0 ? true : false;
}
tino at infeon dot com ¶
7 years ago
this may be handy and i didnt know where else to post it.. i need a simple function to cycle through an array i eventually made it into a class so i could have multiple cycles.. if you like it or find it usefull please email me and let me know
class Cycle
{
var $position;
var $dataArray;
var $dataArrayCount;
function Cycle()
{
$this->dataArray = func_get_args();
$this->dataArrayCount = count($this->dataArray);
}
function Display()
{
$this->position = (!isset($this->position) || $this->position >= ($this->dataArrayCount - 1)) ? 0 : $this->position += 1;
return $this->dataArray[$this->position];
}
}
$bgColor = new Cycle('#000000', '#FFFFFF', '#FF0000');
echo $bgcolor->Display();
//returns #000000
echo $bgcolor->Display();
//returns #FFFFFF
echo $bgcolor->Display();
//returns #FF0000
echo $bgcolor->Display();
//returns #000000
bm at ANTISPAM dot solidwave dot com ¶
9 years ago
Take care when replacing code using reset()/next() with code using foreach as foreach does not update the array's internal pointer. This means you cannot, say, use next() to skip an element in foreach loop, or use current() within a function to get a reference to the current element. You probably have code depending on this internal pointer and replacing it will be more work than you anticipated.
See http://www.php.net/foreach
GPatmore ¶
6 years ago
If your using a foreach loop, unless you for a reference, PHP will make a copy of the array to use it the loop.
So, when I need to take a different action for the last element in the array I use the following:
<?php
$ary = explode(',','a,b,c,d,e,f,g');
foreach($ary as $a){
print 'letter ' . $a;
if(next($ary)){
print '<br>';
}else{
print '<br>dun!';
}
}
?>
Output:
letter a
letter b
letter c
letter d
letter e
letter f
letter g
dun!
NOTE::
PHP5 has added an ability to reference the variable in a foreach like:
<?php
foreach($ary as &$a){}
?>
this will probably cause undesired results when using the method above.
also if the array is changed in any way as to cause the length of the original array to become different then the copy, it will not work.
Consider the following example:
<?php
$ary = explode(',','a,b,c,d,e,f,g');
foreach($ary as $a){
print 'letter ' . $a;
if(next($ary)){
unset($ary[count($ary) - 1]);
print '<br>';
}else{
print '<br>dun!';
}
}
?>
output:
letter a
letter b
letter c
letter d
dun!letter e
dun!letter f
dun!letter g
dun!
tom at nono dot be ¶
6 years ago
I see some questions like "how can I know if an array has a next value without changing its internal pointer" and some pretty complicated responses that DO work mind you and in some cases you'll need them...
But suppose you just need a different action within a foreach loop when reaching the final item:
(it won't be usefull in every situation, but in most it will)
$numOfItems = count($someArray);
$counter = 0;
foreach ($someArray as $key => value){
$counter += 1;
if ($counter <> $numOfItems){
//here all next items exist
} else {
//final item
}
}
Sigmar ¶
6 years ago
And if you want to know if there are any array elements in array before given key, you can use this function:
function any_array_keys_before($keyname, &$array) {
if (!is_array($array)) {
return false;
}
if (empty($keyname)) {
return false;
}
$set = false;
$count = 0;
foreach ($array as $key => $value) {
if ($set === false && $key != $keyname) {
$count ++;
} else if ($key == $keyname) {
$set = true;
}
}
return $count > 0 ? true : false;
}
adityabhai [at] gmail com [Aditya Bhatt] ¶
5 years ago
<?php
class Steps {
private $all;
private $count;
private $curr;
public function __construct () {
$this->count = 0;
}
public function add ($step) {
$this->count++;
$this->all[$this->count] = $step;
}
public function setCurrent ($step) {
reset($this->all);
for ($i=1; $i<=$this->count; $i++) {
if ($this->all[$i]==$step) break;
next($this->all);
}
$this->curr = current($this->all);
}
public function getCurrent () {
return $this->curr;
}
public function getNext () {
self::setCurrent($this->curr);
return next($this->all);
}
public function getPrev () {
self::setCurrent($this->curr);
return prev($this->all);
}
}
?>
Demo Example:
<?php
$steps = new Steps();
$steps->add('1');
$steps->add('2');
$steps->add('3');
$steps->add('4');
$steps->add('5');
$steps->add('6');
$steps->setCurrent('4');
echo $steps->getCurrent()."<br />";
echo $steps->getNext()."<br />";
echo $steps->getPrev()."<br />";
$steps->setCurrent('2');
echo $steps->getCurrent()."<br />";
echo $steps->getNext()."<br />";
echo $steps->getPrev()."<br />";
?>