PUT yöntemi desteği

PHP bazı istemciler tarafından sunucuda dosya saklamak için kullanılan HTTP PUT yöntemini de destekler. PUT istemleri POST istemleri ile dosya yüklemesinden daha basittir ve şu şekildedir:

PUT /dizin_adi/dosyaismi.html HTTP/1.1

Bu normalde uzak istemci /dizin_adi/dosyaismi.html içeriğini site ağacında saklamak istiyor anlamına gelir. Bu Apache veya PHP'nin herkese site ağacındaki herhangi bir dosya üzerine yazma yetkisi verme anlamına geleceği için iyi bir fikir değildir. Bu nedenle böyle bir istem geldiğinde öncelikle HTTP sunucunuza bu istemin belirli bir PHP betiği tarafından karşılanacağını söylemelisiniz. Apache'de bunu Script yönergesi ile yapabilirsiniz. Bu Apache yapılandırma dosyasının herhangi bir yerine konulabilir. Genellikle <Directory> bloğu içine veya <VirtualHost> bloğu içine konulur. Bu, aşağıdaki gibi bir satır olabilir:

Script PUT /put.php

Bu Apache'ye URI'ler için bütün PUT istemlerinin put.php betiğine gönderilmesini söyler. Tabii ki bu durumda .php uzantısının ve PHP'nin etkin olduğu varsayılmaktadır. Bu betiğe gelen bütün PUT istemleri için hedef kaynağı betiğin kendisi olmalıdır.

PHP ile put.php içinde şunu yapabilirsiniz. Bu yüklenen dosyanın içeriğini sunucudaki myputfile.ext dosyasına kopyalar. Bu dosya kopyalamayı gerçekleştirmeden önce bazı denetimlerin yanında kimlik doğrulaması da yapmak isteyebilirsiniz.

Örnek 1 - HTTP PUT dosyalarının kaydedilmesi

<?php
/* PUT verisi stdin akımına gelir */
$putdata = fopen("php://input", "r");

/* Yazmak için bir dosya aç */
$fp = fopen("put_dosyam.ekl", "w");

/* Bir kerede 1 KB veri oku ve dosyaya yaz */
while ($veri = fread($putdata, 1024))
fwrite($fp, $veri);

/* Akımları kapat */
fclose($fp);
fclose($putdata);
?>

add a note add a note

User Contributed Notes 7 notes

up
38
micronix at gmx dot net
13 years ago
Hello PHP World After many Hours of worryness :=)

I have found the Solution for Resume or Pause Uploads
In this Code Snippet it is the Server Side not Client on any Desktop Programm you must use byte ranges to calculate the uploaded bytes and missing of total bytes.

Here the PHP Code

<?php
$CHUNK
= 8192;

        try {
            if (!(
$putData = fopen("php://input", "r")))
                throw new
Exception("Can't get PUT data.");

           
// now the params can be used like any other variable
            // see below after input has finished

           
$tot_write = 0;
           
$tmpFileName = "/var/dev/tmp/PUT_FILE";
           
// Create a temp file
           
if (!is_file($tmpFileName)) {
               
fclose(fopen($tmpFileName, "x")); //create the file and close it
                // Open the file for writing
               
if (!($fp = fopen($tmpFileName, "w")))
                    throw new
Exception("Can't write to tmp file");

               
// Read the data a chunk at a time and write to the file
               
while ($data = fread($putData, $CHUNK)) {
                   
$chunk_read = strlen($data);
                    if ((
$block_write = fwrite($fp, $data)) != $chunk_read)
                        throw new
Exception("Can't write more to tmp file");

                   
$tot_write += $block_write;
                }

                if (!
fclose($fp))
                    throw new
Exception("Can't close tmp file");

                unset(
$putData);
            } else {
               
// Open the file for writing
               
if (!($fp = fopen($tmpFileName, "a")))
                    throw new
Exception("Can't write to tmp file");

               
// Read the data a chunk at a time and write to the file
               
while ($data = fread($putData, $CHUNK)) {
                   
$chunk_read = strlen($data);
                    if ((
$block_write = fwrite($fp, $data)) != $chunk_read)
                        throw new
Exception("Can't write more to tmp file");

                   
$tot_write += $block_write;
                }

                if (!
fclose($fp))
                    throw new
Exception("Can't close tmp file");

                unset(
$putData);
            }

           
// Check file length and MD5
           
if ($tot_write != $file_size)
                throw new
Exception("Wrong file size");

           
$md5_arr = explode(' ', exec("md5sum $tmpFileName"));
           
$md5 = $md5sum_arr[0];
            if (
$md5 != $md5sum)
                throw new
Exception("Wrong md5");
        } catch (
Exception $e) {
            echo
'', $e->getMessage(), "\n";
        }
?>
up
3
San
10 years ago
Instead of using fread fwrite to save uploaded content to a file.
stream_copy_to_stream is much cleaner.
up
-2
gherson
18 years ago
A Case Study:  To set up publishing with Netscape 7.2 Composer to Apache/PHP, no need to use CGI (which I tried unsuccessfully for too long) or to alter Apache's httpd.conf.  I needed only to click Publish As, fill in put2disk.php as the filename (where its contents are the below), and fill in that file's dir as the "Publishing address".
XAMPP 1.4.14: Apache/2.0.54 (Win32) mod_ssl/2.0.54 OpenSSL/0.9.7g PHP/5.0.4.

<? // filename: put2disk.php.

//file_put_contents ("get_def.out", print_r (get_defined_vars(), TRUE)); // debugging

// Two slurp methods: (a) didn't work, (b) did.
//$stdin_rsc = fopen("php://input", "r");
//$putdata='';
//while ($putdata .= fread($stdin_rsc, 1024)); // a. Hangs the "Publishing..." dialog.
//while (!feof($stdin_rsc)) $putdata.=fread($stdin_rsc, 8192); // b. Worked, but file_get_contents is faster.
//fclose($stdin_rsc);

// All that's nec:
$putdata=file_get_contents('php://input'); // Not php://stdin! (When the ability to see error messages isn't available, the doc (this manual page) needs to be more accurate.)

file_put_contents("stdin.out",$putdata);
?>
up
-4
yaogzhan at gmail dot com
18 years ago
PUT raw data comes in php://input, and you have to use fopen() and fread() to get the content. file_get_contents() is useless.

The HTTP PUT request MUST contain a Content-Length header to specify the length (in bytes) of the body, or the server will not be able to know when the input stream is over. This is the common problem for many to find the php://input empty if no such header available.

This should make PUT work properly on win32 using PHP5.1.1 and apache2.
up
-6
warhog at warhog dot net
18 years ago
NOTE: The <Script>-Directive can not be placed in .htaccess files.

So if you're having shared webspace and no access to the apache-configuration file you will have little chance to make something like this work.

But you can solve the problem, using mod_rewrite (for Apache) - for further information see the documentation at http://httpd.apache.org/docs/2.0/mod/mod_rewrite.html
up
-8
mikeb at mikebanahan dot com
20 years ago
I have spent a lot of time trying to make PUT work with Apache 2.0.40. I have not yet been able to find any way of making the Script directive invoke php via mod_php, the only way has been to have a file called example.cgi and invoke it via CGI, with the file starting
#!/usr/bin/php
so the PHP interpreter is invoked through the CGI mechanism and not as a module.

If there IS a way of making it work 'right' I'd love to know! After six hours of messing around, I've settled for CGI. The error messages in the apache error log are significantly misleading and the whole thing has been an exercise in frustration.

Attempts to use AddHandler and all 'normal' ways of trying to persuade Apache to do this have been fruitless. It does seem as if PUT can only be handled by CGI invocation.
up
-27
kicaj
10 years ago
to create variable such as $_GET, $_POST use
that solution

<?php
    $_SERVER
['REQUEST_METHOD']==="PUT" ? parse_str(file_get_contents('php://input', false , null, -1 , $_SERVER['CONTENT_LENGTH'] ), $_PUT): $_PUT=array();
?>
To Top