Манипуляции с типами

PHP не требует явного определения типа при объявлении переменной. Тип переменной определится значением, которое хранит переменная, если тип переменной не определили. То есть, если переменной $var присвоили строковое значение (string), тип переменной $var — строка (string). Тип переменной изменится на целое число (int), если позже переменной $var присвоят целочисленное значение (int).

В ряде контекстов PHP попытается автоматически преобразовать тип значения в другой. Переменные существуют в следующих контекстах:

  • Числовой
  • Строчный
  • Логический
  • Контекст целых чисел и строк
  • Сравнительный
  • Контекст функций

Замечание: Когда значение требуется интерпретировать как другой тип, само значение не изменяет типы.

Как заставить PHP оценивать переменную как конкретный тип, рассказывает раздел «Приведение типов». Описание функции settype() объясняет, как изменить тип переменной.

Числовой контекст

Числовой контекст возникает при работе с арифметическими операторами.

В этом контексте оба операнда интерпретируются как число с плавающей точкой (float) и результатом будет число с плавающей точкой (float), если один из операндов — число с плавающей точкой (float) (или не интерпретируется как целое число (int)). В противном случае операнды интерпретируются как целое число (int) и результатом также будет целое число (int). С PHP 8.0.0 выбрасывается исключение TypeError, если не получается интерпретировать хотя бы один операнд.

Строчный контекст

Строчный контекст возникает при работе с языковыми конструкциями echo, print, при интерполяции строк или строковом операторе конкатенации.

В этом контексте значение будет интерпретироваться как строка (string). Выбрасывается исключение TypeError, если значение не получается интерпретировать. До версии PHP 7.4.0 выдавалась ошибка уровня E_RECOVERABLE_ERROR.

Логический контекст

Логический контекст возникает при работе с условными операторами, тернарным оператором или логическими операторами.

В этом контексте значение интерпретируется как логическое значение (bool).

Контекст целых чисел и строк

Контекст целых чисел и строк возникает при работе с побитовыми операторами.

В этом контексте результатом будет строка (string), если тип всех операндов — строка (string). В противном случае операнды интерпретируются как целое число (int) и результатом также будет целое число (int). С PHP 8.0.0 выбрасывается исключение TypeError, если не получается интерпретировать хотя бы один операнд.

Сравнительный контекст

Сравнительный контекст возникает при работе с операторами сравнения.

Преобразования типов, которые происходят в этом контексте, объясняет таблица сравнения типов раздела «Операторы сравнения».

Контекст функций

Контекст функций возникает, когда значение передаётся типизированному параметру, свойству или возвращается из функции, которая объявляет тип возвращаемого значения.

В контексте функции на значение накладывается требование — соответствовать тому типу, который объявили. Исключение составляют два случая. Первый: целое число преобразовывается в число с плавающей точкой, если тип значения — целое число (int), а тип объявили как число с плавающей точкой (float). Второй: значение преобразовывается в принимаемое скалярное значение, если: а) тип объявили как скалярный, б) значение доступно для преобразования в скалярный тип и в) активен режим нестрогой типизации, в котором PHP работает по умолчанию. Описание такого поведения даёт следующий параграф.

Внимание

Встроенные функции автоматически приводят значение null к скалярным типам, это поведение УСТАРЕЛО с PHP 8.1.0.

Типизация при объявлении простых типов в режиме нестрогой типизации

  • Объявление типа bool: значение интерпретируется как логическое значение (bool).
  • Объявление типа int: значение интерпретируется как целое число (int), если интерпретатор точно определил характер преобразования. Например, когда строка — числовая строка.
  • Объявление типа float: значение интерпретируется как число с плавающей точкой (float), если интерпретатор точно определил характер преобразования. Например, когда строка — числовая строка.
  • Объявление типа string: значение интерпретируется как строка (string).

Типизация при объединении типов в режиме нестрогой типизации

Объявления скалярных типов подвергаются ограниченному неявному приведению типов, если директивой strict_types не включили режим строгой типизации. Если точный тип значения — не часть объединённого типа, то целевой тип выбирается из списка в порядке убывания приоритета:

  1. int
  2. float
  3. string
  4. bool
Интерпретатор выбирает тип, если тип присутствует в объединении типов и значение получается привести к типу в соответствии с действующей семантикой проверки типов PHP. В противном случае интерпретатор выбирает следующий по порядку тип.

Предостережение

В качестве исключения: если значение — строка, а объединение типов состоит из целого число (int) и числа с плавающей точкой (float), интерпретатор определит предпочтительный тип действующей семантикой числовой строки. Например, для значения «42» выберет целое число (int), а для значения «42.0» — число с плавающей точкой (float).

Замечание:

Типы, которые не входят в список предпочтений, не станут целями для неявного приведения. Говоря конкретнее, никакого неявного приведения к типам null, false и true не будет.

Пример #1 Пример приведения типов к типу из объединения типов

<?php

// int|string
42 --> 42 // Точный тип
"42" --> "42" // Точный тип
new ObjectWithToString --> "Результат работы метода __toString()"
// Объект несовместим с типом int, переход к типу string
42.0 --> 42 // Тип float совместим с типом int
42.1 --> 42 // Тип float совместим с типом int
1e100 --> "1.0E+100" // Тип float слишком велик для типа int, переход к типу string
INF --> "INF" // Тип float слишком велик для типа int, переход к типу string
true --> 1 // Тип bool совместим с типом int
[] --> TypeError // Массив несовместим с типами int или string

// int|float|bool
"45" --> 45 // Целочисленная числовая строка, int
"45.0" --> 45.0 // Строка с числом с плавающей точкой, float

"45X" --> true // Нечисловая строка, переход к типу bool
"" --> false // Нечисловая строка, переход к типу bool
"X" --> true // Нечисловая строка, переход к типу bool
[] --> TypeError // Массив несовместим с типами int, float или bool

?>

Приведение типов

Приведение типов преобразовывает значение в тип, который выбирает интерпретатор, путём записи типа в круглых скобках перед значением, которое преобразовывается.

<?php

$foo
= 10; // Переменная $foo — целое число
$bar = (bool) $foo; // Переменная $bar — логическое значение

?>

Разрешены следующие приведения типов:

  • (int) — приведение типа к целому числу (int)
  • (bool) — приведение типа к логическому значению (bool)
  • (float) — приведение типа к числу с плавающей точкой (float)
  • (string) — приведение типа к строке (string)
  • (array) — приведение типа к массиву (array)
  • (object) — приведение типа к объекту (object)
  • (unset) — приведение типа к NULL

Замечание:

(integer) — псевдоним приведения типа (int). (boolean) — псевдоним приведения типа (bool). (binary) — псевдоним приведения типа (string). (double) и (real) — псевдонимы приведения типа (float). Эти приведения не используют каноническое имя типа и не рекомендуются.

Внимание

Псевдоним приведения типа (real) устарел с PHP 8.0.0.

Внимание

Приведение типа (unset) устарело с версии PHP 7.2.0. Обратите внимание, что приведение (unset) равносильно присваиванию переменной или вызову значения NULL. Приведение (unset) удалили в PHP 8.0.0.

Предостережение

Приведение типа (binary) и префикс b существуют для прямой поддержки. Типы (binary) и (string) идентичны, однако, это может измениться, не нужно на это полагаться.

Замечание:

PHP игнорирует пробелы в круглых скобках при приведении типа. Поэтому следующие два приведения типов эквивалентны:

<?php

$foo
= (int) $bar;
$foo = ( int ) $bar;

?>

Приведение строк (string) и переменных к бинарным строкам (string):

<?php

$binary
= (binary) $string;
$binary = b"binary string";

?>

Замечание: Вместо приведения переменной к строке (string) переменную берут в двойные кавычки.

<?php

$foo
= 10; // Переменная $foo — целое число
$str = "$foo"; // Переменная $str — строка
$fst = (string) $foo; // Переменная $fst тоже строка

// Выводит: «они одинаковые»
if ($fst === $str) {
echo
"они одинаковые";
}

?>

Не всегда ясно, что произойдет при приведении между конкретными типами. Дополнительную информацию дают разделы:

Замечание: Поскольку PHP поддерживает индексацию в строках (string) через смещения, используя тот же синтаксис, что и индексация в массивах (array), следующий пример справедлив для всех версий PHP:

<?php

$a
= 'car'; // Переменная $a — строка
$a[0] = 'b'; // Переменная $a по-прежнему строка
echo $a; // Выводит: bar

?>
Дополнительную информацию даёт раздел « Доступ к символу в строке и его изменение ».

add a note add a note

User Contributed Notes 36 notes

up
70
Raja
19 years ago
Uneven division of an integer variable by another integer variable will result in a float by automatic conversion -- you do not have to cast the variables to floats in order to avoid integer truncation (as you would in C, for example):

$dividend = 2;
$divisor = 3;
$quotient = $dividend/$divisor;
print $quotient; // 0.66666666666667
up
12
Anonymous
5 years ago
"An example of PHP's automatic type conversion is the multiplication operator '*'. If either operand is a float, then both operands are evaluated as floats, and the result will be a float. Otherwise, the operands will be interpreted as integers, and the result will also be an integer. Note that this does not change the types of the operands themselves; the only change is in how the operands are evaluated and what the type of the expression itself is."

I understand what the doc is trying to say here, but this sentence is not correct as stated, other types can be coerced into floats.

e.g.

<?php
$a
= "1.5"; // $a is a string
$b = 100; // $b is an int
$c = $a * $b; // $c is a float, value is 150
// multiplication resulted in a float despite fact that neither operand was a float
up
26
yury at krasu dot ru
21 years ago
incremental operator ("++") doesn't make type conversion from boolean to int, and if an variable is boolean and equals TRUE than after ++ operation it remains as TRUE, so:

$a = TRUE;
echo ($a++).$a;  // prints "11"
up
22
fardelian
10 years ago
Casting objects to arrays is a pain. Example:

<?php

class MyClass {

    private
$priv = 'priv_value';
    protected
$prot = 'prot_value';
    public
$pub = 'pub_value';
    public
$MyClasspriv = 'second_pub_value';

}

$test = new MyClass();
echo
'<pre>';
print_r((array) $test);

/*
Array
(
    [MyClasspriv] => priv_value
    [*prot] => prot_value
    [pub] => pub_value
    [MyClasspriv] => second_pub_value
)
*/

?>

Yes, that looks like an array with two keys with the same name and it looks like the protected field was prepended with an asterisk. But that's not true:

<?php

foreach ((array) $test as $key => $value) {
   
$len = strlen($key);
    echo
"{$key} ({$len}) => {$value}<br />";
    for (
$i = 0; $i < $len; ++$i) {
        echo
ord($key[$i]) . ' ';
    }
    echo
'<hr />';
}

/*
MyClasspriv (13) => priv_value
0 77 121 67 108 97 115 115 0 112 114 105 118
*prot (7) => prot_value
0 42 0 112 114 111 116
pub (3) => pub_value
112 117 98
MyClasspriv (11) => second_pub_value
77 121 67 108 97 115 115 112 114 105 118
*/

?>

The char codes show that the protected keys are prepended with '\0*\0' and private keys are prepended with '\0'.__CLASS__.'\0' so be careful when playing around with this.
up
19
Anonymous
21 years ago
Printing or echoing a FALSE boolean value or a NULL value results in an empty string:
(string)TRUE //returns "1"
(string)FALSE //returns ""
echo TRUE; //prints "1"
echo FALSE; //prints nothing!
up
10
rmirabelle
13 years ago
The object casting methods presented here do not take into account the class hierarchy of the class you're trying to cast your object into.

/**
     * Convert an object to a specific class.
     * @param object $object
     * @param string $class_name The class to cast the object to
     * @return object
     */
    public static function cast($object, $class_name) {
        if($object === false) return false;
        if(class_exists($class_name)) {
            $ser_object     = serialize($object);
            $obj_name_len     = strlen(get_class($object));
            $start             = $obj_name_len + strlen($obj_name_len) + 6;
            $new_object      = 'O:' . strlen($class_name) . ':"' . $class_name . '":';
            $new_object     .= substr($ser_object, $start);
            $new_object     = unserialize($new_object);
            /**
             * The new object is of the correct type but
             * is not fully initialized throughout its graph.
             * To get the full object graph (including parent
             * class data, we need to create a new instance of
             * the specified class and then assign the new
             * properties to it.
             */
            $graph = new $class_name;
            foreach($new_object as $prop => $val) {
                $graph->$prop = $val;
            }
            return $graph;
        } else {
            throw new CoreException(false, "could not find class $class_name for casting in DB::cast");
            return false;
        }
    }
up
2
Dhairya Lakhera
4 years ago
Value of uninitialized variable of different data types.

settype($a,'bool');
var_dump($a);         //boolean false

settype($b,'string');
var_dump($b);        //string '' (length=0)

settype($c,'array');
var_dump($c);        //array (size=0)  empty

settype($d,'int');
var_dump($d);       //int 0

settype($e,'float');
var_dump($e);      //float 0

settype($f,'object');
var_dump($f);     //object(stdClass)[1]
up
11
ieee at REMOVE dot bk dot ru
11 years ago
There are some shorter and faster (at least on my machine) ways to perform a type cast.
<?php
$string
='12345.678';
$float=+$string;
$integer=0|$string;
$boolean=!!$string;
?>
up
5
kuzawinski dot marcin at NOSPAM dot gmail dot com
9 years ago
You REALLY must be aware what you are doing, when you cast a lot  in your code. For example, you can accidentaly change FALSE to TRUE  (probably not in one line, like here):

if(TRUE === (boolean) (array) (int) FALSE) {
    kaboom();
}
up
2
Anonymous
12 years ago
namaroulis stated "I found it tricky to check if a posted value was an integer"; to test if a variable is a number or a numeric string (such as form input, which is always a string), you must use is_numeric():

<?php
$_POST
['a'] = "42";

is_numeric( $_POST['a'] ); // true
?>
up
2
martinscotta at gmail dot com
13 years ago
in response to bhsmither at gmail.com

It raises a warning because of the bad enquoted variable

<?php

error_reporting
( E_ALL | E_STRICT );

$foo['ten'] = 10;        // $foo['ten'] is an array holding an integer at key "ten"
$str = "{$foo['ten']}"// works "10"
$str = "$foo[ten]";      // DO NOT work!
up
2
wbcarts at juno dot com
15 years ago
WHERE'S THE BEEF?

Looks like type-casting user-defined objects is a real pain, and ya gotta be nuttin' less than a brain jus ta cypher-it. But since PHP supports OOP, you can add the capabilities right now. Start with any simple class.
<?php
class Point {
  protected
$x, $y;

  public function
__construct($xVal = 0, $yVal = 0) {
   
$this->x = $xVal;
   
$this->y = $yVal;
  }
  public function
getX() { return $this->x; }
  public function
getY() { return $this->y; }
}

$p = new Point(25, 35);
echo
$p->getX();      // 25
echo $p->getY();      // 35
?>
Ok, now we need extra powers. PHP gives us several options:
  A. We can tag on extra properties on-the-fly using everyday PHP syntax...
    $p->z = 45; // here, $p is still an object of type [Point] but gains no capability, and it's on a per-instance basis, blah.
  B. We can try type-casting it to a different type to access more functions...
    $p = (SuperDuperPoint) $p; // if this is even allowed, I doubt it. But even if PHP lets this slide, the small amount of data Point holds would probably not be enough for the extra functions to work anyway. And we still need the class def + all extra data. We should have just instantiated a [SuperDuperPoint] object to begin with... and just like above, this only works on a per-instance basis.
  C. Do it the right way using OOP - and just extend the Point class already.
<?php
class Point3D extends Point {
  protected
$z;                                // add extra properties...

 
public function __construct($xVal = 0, $yVal = 0, $zVal = 0) {
   
parent::__construct($xVal, $yVal);
   
$this->z = $zVal;
  }
  public function
getZ() { return $this->z; }  // add extra functions...
}

$p3d = new Point3D(25, 35, 45);  // more data, more functions, more everything...
echo $p3d->getX();               // 25
echo $p3d->getY();               // 35
echo $p3d->getZ();               // 45
?>
Once the new class definition is written, you can make as many Point3D objects as you want. Each of them will have more data and functions already built-in. This is much better than trying to beef-up any "single lesser object" on-the-fly, and it's way easier to do.
up
2
edgar dot klerks at gmail dot com
15 years ago
It seems (unset) is pretty useless. But for people who like to make their code really compact (and probably unreadable). You can use it to use an variable and unset it on the same line:

Without cast:

<?php

$hello
= 'Hello world';
print
$hello;
unset(
$hello);

?>

With the unset cast:

<?php

$hello
= 'Hello world';
$hello = (unset) print $hello;

?>

Hoorah, we lost another line!
up
2
miracle at 1oo-percent dot de
18 years ago
If you want to convert a string automatically to float or integer (e.g. "0.234" to float and "123" to int), simply add 0 to the string - PHP will do the rest.

e.g.

$val = 0 + "1.234";
(type of $val is float now)

$val = 0 + "123";
(type of $val is integer now)
up
2
Anonymous
13 years ago
Checking for strings to be integers?
How about if a string is a float?

<?php

/* checks if a string is an integer with possible whitespace before and/or after, and also isolates the integer */
$isInt=preg_match('/^\s*([0-9]+)\s*$/', $myString, $myInt);

echo
'Is Integer? ',  ($isInt) ? 'Yes: '.$myInt[1] : 'No', "\n";

/* checks if a string is an integer with no whitespace before or after  */
$isInt=preg_match('/^[0-9]+$/', $myString);

echo
'Is Integer? ',  ($isInt) ? 'Yes' : 'No', "\n";

/* When checking for floats, we assume the possibility of no decimals needed.  If you MUST require decimals (forcing the user to type 7.0 for example) replace the sequence:
[0-9]+(\.[0-9]+)?
with
[0-9]+\.[0-9]+
*/

/* checks if a string is a float with possible whitespace before and/or after, and also isolates the number */
$isFloat=preg_match('/^\s*([0-9]+(\.[0-9]+)?)\s*$/', $myString, $myNum);

echo
'Is Number? ',  ($isFloat) ? 'Yes: '.$myNum[1] : 'No', "\n";

/* checks if a string is a float with no whitespace before or after */
$isInt=preg_match('/^[0-9]+(\.[0-9]+)?$/', $myString);

echo
'Is Number? ',  ($isFloat) ? 'Yes' : 'No', "\n";

?>
up
2
Anonymous
3 years ago
Cast operators have a very high precedence, for example (int)$a/$b is evaluated as ((int)$a)/$b, not as (int)($a/$b) [which would be like intdiv($a,$b) if both $a and $b are integers].
The only exceptions (as of PHP 8.0) are the exponentiation operator ** [i.e. (int)$a**$b is evaluated as (int)($a**$b) rather than ((int)$a)**$b] and the special access/invocation operators ->, ::, [] and () [i.e. in each of (int)$a->$b, (int)$a::$b, (int)$a[$b] and (int)$a($b), the cast is performed last on the result of the variable expression].
up
1
lucazd at gmail dot com
15 years ago
@alexgr (20-Jun-2008)

Correct me if I'm wrong, but that is not a cast, it might be useful sometimes, but the IDE will not reflect what's really happening:

<?php
class MyObject {
   
/**
     * @param MyObject $object
     * @return MyObject
     */
   
static public function cast(MyObject $object) {
        return
$object;
    }
   
/** Does nothing */
   
function f() {}
}

class
X extends MyObject {
   
/** Throws exception */
   
function f() { throw new exception(); }
}

$x = MyObject::cast(new X);
$x->f(); // Your IDE tells 'f() Does nothing'
?>

However, when you run the script, you will get an exception.
up
1
namaroulis at gmail dot com
13 years ago
I found it tricky to check if a posted value was an integer.

<?php

$_POST
['a'] = "42";

is_int( $_POST['a'] ); //false
is_int( intval( "anything" ) ); //always true
?>

A method I use for checking if a string represents an integer value.

<?php
function check_int( $str )
                {
                    return 
is_numeric( $str ) && intval( $str ) - $str == 0;
                }
?>
up
1
jphansen at uga dot edu
12 years ago
Type casting from string to int and vice versa is probably the most common conversation. PHP does this very simply through the +. and .= operators, removing any explicit casting:

<?php
$x
= 1;
var_dump($x); // int(1)
$x .= 1;
var_dump($x); // string(2) "11"; also an empty string ("") would cast to string without changing $x

$x = "1";
var_dump($x);  // string(1) "1"
$x += 1;
var_dump($x); // int(2); also a zero value (0) would cast to int without changing $x
?>
up
1
Anonymous
18 years ago
If you have a boolean, performing increments on it won't do anything despite it being 1.  This is a case where you have to use a cast.

<html>
<body> <!-- don't want w3.org to get mad... -->
<?php
$bar
= TRUE;
?>
I have <?=$bar?> bar.
<?php
$bar
++;
?>
I now have <?=$bar?> bar.
<?php
$bar
= (int) $bar;
$bar++;
?>
I finally have <?=$bar?> bar.
</body>
</html>

That will print

I have 1 bar.
I now have 1 bar.
I finally have 2 bar.
up
0
hemi68 at hotmail dot com
12 years ago
Cast a string to binary using PHP < 5.2.1

$binary = unpack('c*', $string);
up
0
bhsmither at gmail.com
14 years ago
<?php
$foo
['ten'] = 10;            // $foo['ten'] is an array holding an integer at key "ten"
$str = "$foo['ten']";        // throws T_ENCAPSED_AND_WHITESPACE error
$str = "$foo[ten]";          // works because constants are skipped in quotes
$fst = (string) $foo['ten']; // works with clear intention
?>
up
0
hek at theeks dot net
15 years ago
It would be useful to know the precedence (for lack of a better word) for type juggling.  This entry currently explains that "if either operand is a float, then both operands are evaluated as floats, and the result will be a float" but could (and I think should) provide a hierarchy that indicates, for instance, "between an int and a boolean, int wins; between a float and an int, float wins; between a string and a float, string wins" and so on (and don't count on my example accurately capturing the true hierarchy, as I haven't actually done the tests to figure it out).  Thanks!
up
0
alexgr at gmail dot com
15 years ago
For a Cast to a User Defined Object you can define a cast method:

class MyObject {
    /**
     * @param MyObject $object
     * @return MyObject
     */
    static public function cast(MyObject $object) {
        return $object;
    }
}

In your php page code you can:
$myObject = MyObject::cast($_SESSION["myObject"]);

Then, PHP will validate the value and your IDE will help you.
up
0
toma at smartsemantics dot com
19 years ago
In my much of my coding I have found it necessary to type-cast between objects of different class types.

More specifically, I often want to take information from a database, convert it into the class it was before it was inserted, then have the ability to call its class functions as well.

The following code is much shorter than some of the previous examples and seems to suit my purposes.  It also makes use of some regular expression matching rather than string position, replacing, etc.  It takes an object ($obj) of any type and casts it to an new type ($class_type).  Note that the new class type must exist:

function ClassTypeCast(&$obj,$class_type){
    if(class_exists($class_type,true)){
        $obj = unserialize(preg_replace"/^O:[0-9]+:\"[^\"]+\":/i",
          "O:".strlen($class_type).":\"".$class_type."\":", serialize($obj)));
    }
}
up
0
philip_snyder at hotmail dot com
20 years ago
Re: the typecasting between classes post below... fantastic, but slightly flawed. Any class name longer than 9 characters becomes a problem... SO here's a simple fix:

function typecast($old_object, $new_classname) {
  if(class_exists($new_classname)) {
    // Example serialized object segment
    // O:5:"field":9:{s:5:...   <--- Class: Field
    $old_serialized_prefix  = "O:".strlen(get_class($old_object));
    $old_serialized_prefix .= ":\"".get_class($old_object)."\":";

    $old_serialized_object = serialize($old_object);
    $new_serialized_object = 'O:'.strlen($new_classname).':"'.$new_classname . '":';
    $new_serialized_object .= substr($old_serialized_object,strlen($old_serialized_prefix));
   return unserialize($new_serialized_object);
  }
  else
   return false;
}

Thanks for the previous code. Set me in the right direction to solving my typecasting problem. ;)
up
-1
Eric Lavoie
9 years ago
(array) null
array(null)

are not the same.

var_dump((array) null) =>
array (size=0)
  empty

var_dump(array (null)) =>
array (size=1)
  0 => null
up
-1
berniev
8 years ago
May be expected, but not stated ..
Casting to the existing (same) type has no effect.
$t = 'abc';          // string 'abc'
$u=(array) $t;   // array 0 => string 'abc'  <-- now an array
$v=(array) $u;  // array 0 => string 'abc'  <-- unchanged
up
-2
mbrowne83 (at GM)
9 years ago
The code listed in some of the comments here for supposedly "casting" from one class to another using unserialize/serialize does not actually change the class of the existing object; it creates a new object. So it's not the same as a cast.
up
-4
tom5025_ at hotmail dot com
19 years ago
function strhex($string)
{
   $hex="";
   for ($i=0;$i<strlen($string);$i++)
       $hex.=dechex(ord($string[$i]));
   return $hex;
}
function hexstr($hex)
{
   $string="";
   for ($i=0;$i<strlen($hex)-1;$i+=2)
       $string.=chr(hexdec($hex[$i].$hex[$i+1]));
   return $string;
}

to convert hex to str and vice versa
up
-4
post_at_henribeige_dot_de
20 years ago
If you want to do not only typecasting between basic data types but between classes, try this function. It converts any class into another. All variables that equal name in both classes will be copied.

function typecast($old_object, $new_classname) {
  if(class_exists($new_classname)) {
    $old_serialized_object = serialize($old_object);
    $new_serialized_object = 'O:' . strlen($new_classname) . ':"' . $new_classname . '":' .
                             substr($old_serialized_object, $old_serialized_object[2] + 7);
    return unserialize($new_serialized_object);
  }
  else
    return false;
}

Example:

class A {
  var $secret;
  function A($secret) {$this->secret = $secret;}
  function output() {echo("Secret class A: " . $this->secret);}
}

class B extends A {
  var $secret;
  function output() {echo("Secret class B: " . strrev($this->secret));}
}

$a = new A("Paranoia");
$b = typecast($a, "B");

$a->output();
$b->output();
echo("Classname \$a: " . get_class($a) . "Classname \$b: " . get_class($b));

Output of the example code above:

Secret class A: Paranoia
Secret class B: aionaraP
Classname $a: a
Classname $b: b
up
-4
dimo dot vanchev at bianor dot com
20 years ago
For some reason the code-fix posted by philip_snyder at hotmail dot com [27-Feb-2004 02:08]
didn't work for me neither with long_class_names nor with short_class_names. I'm using PHP v4.3.5 for Linux.
Anyway here's what I wrote to solve the long_named_classes problem:

<?php
function typecast($old_object, $new_classname) {
    if(
class_exists($new_classname)) {
       
$old_serialized_object = serialize($old_object);
       
$old_object_name_length = strlen(get_class($old_object));
       
$subtring_offset = $old_object_name_length + strlen($old_object_name_length) + 6;
       
$new_serialized_object  = 'O:' . strlen($new_classname) . ':"' . $new_classname . '":';
       
$new_serialized_object .= substr($old_serialized_object, $subtring_offset);
        return
unserialize($new_serialized_object);
     } else {
         return
false;
     }
}
?>
up
-6
nullhilty at gmail dot com
15 years ago
Just a little experiment on the (unset) type cast:

<?php
$var
= 1;
$var_unset = (unset) $var;
$var_ref_unset &= (unset) $var;
var_dump($var);
var_dump($var_unset);
var_dump($var_ref_unset);
?>

output:
int(1)
NULL
int(0)
up
-6
davaakhuu at outlook dot com
8 years ago
Type Juggling<br/>
   <?php $count = "2 cats"; ?>
   Type: <?php echo gettype($count); ?><br/>
   <?php $count += 3; ?>
   Type: <?php echo gettype($count); ?><br/>
   <?php $cats = "I have " . $count . "cats."; ?>
   Cats: <?php echo gettype($cats); ?><br/>
   <br/>
   Type Casting<br/>
   <?php settype($count, "integer"); ?>
   count: <?php echo gettype($count); ?><br/>

   <?php $count2 = (string)$count; ?>
   count: <?php echo gettype($count); ?><br/>
   count2: <?php echo gettype($count2); ?><br/>

   <?php $test1 = 3; ?>
   <?php $test2 = 3; ?>
   <?php settype($test1, "string"); ?>
   <?php (string)$test2; ?>
   test1: <?php echo gettype($test1); ?><br/>
   test2: <?php echo gettype($test2); ?><br/>
up
-8
kajsunansis at that gmail
15 years ago
json_decode users consider this, when casting stdClass to array:
<?php
$obj
= new stdClass();
$obj->{"2"} = "id";
$arr = (array) $obj;
$result = isset($arr["2"]) || array_key_exists(2, $arr); // false
?>
..though casting is at least 2x faster than foreach.
up
-17
Jeffrey
15 years ago
IMAGINATION REQUIRED...

We can be a witness to PHP's 'type-jugglin' in real-time with a simple implementation of a MemoryMap. For the sake our purposes, pretend that this is an empty MemoryMap.
+-------+------+------+-------+
| index | $var | type | value |
+-------+------+------+-------+
|     1 |  --- | NULL |  null |
|     2 |  --- | NULL |  null |
|     3 |  --- | NULL |  null |
|     4 |  --- | NULL |  null |
+-------+------+------+-------+

<?php
# create some variables...
$a = 10;
$b = "Hello";
$c = array(55.45, 98.65);
# Now look at map...
?>
+-------+-------+---------+--------+
| index |  $var |    type |  value |
+-------+-------+---------+--------+
|     1 |    $a | INTEGER |     10 |
|     2 |    $b |  STRING |  Hello |
|     3 | $c[0] |   FLOAT |  55.45 |
|     4 | $c[1] |   FLOAT |  98.65 |
+-------+-------+---------+--------+
<?php
# Now, change the variable types...
$a = "Bye";
$b = 2;
$c[0] = "Buy";
$c[1] = "Now!";
#Look at map...
?>
+-------+-------+---------+--------+
| index |  $var |    type |  value |
+-------+-------+---------+--------+
|     1 |    $a |  STRING |    Bye | <- used to be INTEGER
|     2 |    $b | INTEGER |      2 | <- used to be STRING
|     3 | $c[0] |  STRING |    Buy | <- used to be FLOAT
|     4 | $c[1] |  STRING |  Right | <- used to be FLOAT
+-------+-------+---------+--------+
To Top