strspn

(PHP 4, PHP 5, PHP 7, PHP 8)

strspn Возвращает длину участка в начале строки, полностью соответствующего маске

Описание

strspn(
    string $string,
    string $characters,
    int $offset = 0,
    ?int $length = null
): int

Возвращает длину участка от начала строки string, содержащий только символы из characters.

Если параметры offset и length не указаны, то будет исследована вся строка string. Если они указаны, то эффект будет аналогичен вызову strspn(substr($string, $offset, $length), $characters) (подробнее смотрите функцию substr).

Строка кода:

<?php
$var
= strspn("42 - ответ на 128 вопрос.", "1234567890");
?>
присвоит 2 переменной $var, так как "42" - это начальный участок строки string, состоящий только из символов "1234567890".

Список параметров

string

Исследуемая строка.

characters

Список из разрешённых символов.

offset

Позиция начала поиска в subject.

Если offset указан и неотрицателен, то strspn() начнёт искать в строке string, начиная с позиции offset. К примеру, в строке 'abcdef', символом с позицией 0 является 'a', символом с позицией 2 является 'c' и т.д.

Если offset указан и отрицателен, то strspn() начнёт поиск в строке string с позиции, отстоящей на offset символов с конца string.

length

Длина исследуемого фрагмента string.

Если length указан и неотрицателен, то строка string будет исследована в течение length после стартовой позиции.

Если length указан и отрицателен, то строка string будет исследована начиная со стартовой позиции до позиции, отстоящей на length символов с конца string.

Возвращаемые значения

Возвращает длину первого участка string, состоящего целиком из символов в characters.

Замечание:

Когда offset указан, возвращаемая длина строки определяется, начиная с этой позиции, а не с начала строки string.

Список изменений

Версия Описание
8.0.0 length теперь допускает значение null.

Примеры

Пример #1 Пример использования strspn()

<?php
// subject не начинается ни из какого символа из mask
var_dump(strspn("foo", "o"));

// проверить два символа из subject, начиная с позиции 1
var_dump(strspn("foo", "o", 1, 2));

// проверить один символ из subject, начиная с позиции 1
var_dump(strspn("foo", "o", 1, 1));
?>

Результат выполнения приведённого примера:

int(0)
int(2)
int(1)

Примечания

Замечание: Эта функция безопасна для обработки данных в двоичной форме.

Смотрите также

  • strcspn() - Возвращает длину участка в начале строки, не соответствующего маске

add a note add a note

User Contributed Notes 9 notes

up
20
barry dot balkowski at gmail dot com
15 years ago
It took me some time to understand the way this function works…
I’ve compiled my own explanation with my own words that is more understandable for me personally than the official one or those that can be found in different tutorials on the web.
Perhaps, it will save someone several minutes…

<?php
strspn
(string $haystack, string $char_list [, int $start [, int $length]])
?>

The way it works:
-   searches for a segment of $haystack that consists entirely from supplied through the second argument chars
-   $haystack must start from one of the chars supplied through $char_list, otherwise the function will find nothing
-   as soon as the function encounters a char that was not mentioned in $chars it understands that the segment is over and stops (it doesn’t search for the second, third and so on segments)
-   finally, it measures the segment’s length and return it (i.e. length)

In other words it finds a span (only the first one) in the string that consists entirely form chars supplied in $chars_list and returns its length
up
18
AT-HE (at_he.hotmail)
13 years ago
you can use this function with strlen to check illegal characters, string lenght must be the same than strspn (characters from my string contained in another)

<?php

$digits
='0123456789';

if (
strlen($phone) != strspn($phone,$digits))
echo
"illegal characters";

?>
up
8
B Crawford
16 years ago
This function is significantly faster for checking illegal characters than the equivalent preg_match() method.
up
5
mrsohailkhan at gmail dot com
13 years ago
very dificult to get from the definition directly, while i search for that,i came to know that

strspn() will tell you the length of a string consisting entirely of the set of characters in accept set. That is, it starts walking down str until it finds a character that is not in the set (that is, a character that is not to be accepted), and returns the length of the string so far.

and

strcspn() works much the same way, except that it walks down str until it finds a character in the reject set (that is, a character that is to be rejected.) It then returns the length of the string so far.

<?php
$acceptSet
= "aeiou";
$rejectSet  = "y";

$str1 ="a banana";
$str2 ="the bolivian navy on manuvers in the south pacific";

echo
$n = strspn($str1,$acceptSet);// $n == 1, just "a"

echo $n = strcspn($str2,$rejectSet);// n = 16, "the bolivian nav"
?>

hope this example will help in understanding the concept of strspn() and strcspn().
up
1
nino dot skopac at gmail dot com
6 years ago
strspon and preg_match seem to be equally fast for validating numbers:

<?php

$testValInvalid
= 'foobar123^^';
$testValValid = '12346';
$allowedChars = '1234567890';

$t1 = microtime(true);
for (
$i = 0; $i < 1000000; $i++) {
   
assert(strspn($testValInvalid, $allowedChars) != strlen($testValInvalid));
   
assert(strspn($testValValid, $allowedChars) == strlen($testValValid));
}
print
'Time taken for strspon: ' . (microtime(true) - $t1);
print
PHP_EOL;

$t1 = microtime(true);
for (
$i = 0; $i < 1000000; $i++) {
   
assert(preg_match('/^[0-9]+$/', $testValInvalid) === 0);
   
assert(preg_match('/^[0-9]+$/', $testValValid));
}

print
'Time taken for preg_match: ' . (microtime(true) - $t1);
print
PHP_EOL;

/**
nino-mcb:hosp_web ninoskopac$ php test.php
Time taken for strspon: 3.24165391922
Time taken for preg_match: 3.1820080280304
nino-mcb:hosp_web ninoskopac$ php test.php
Time taken for strspon: 3.1806418895721
Time taken for preg_match: 3.2244551181793
*/
?>
up
3
bob at example dot com
11 years ago
Quick way to check if a string consists entirely of characters within the mask is to compare strspn with strlen eg:

<?php
$path
= $_SERVER['PATH_INFO'];
if (
strspn($path,'/') == strlen($path)) {
   
//PATH_INFO is empty
}
?>
up
2
Dmitry Mazur
15 years ago
The second parameter is a set of allowed characters.
strspn will return an zero-based index of a first non-allowed character.
up
1
lincoln dot mahmud at gmail dot com
3 years ago
Get Group match letter

<?php

$s
= 'aaabbbcceeffaaeeeaaabbzmmm';

function
groupby( $s ){
    static
$a = [];
    static
$i = 0;
   
   
$o = strspn( $s, $s[$i], $i);
   
$a[ $i ] = [  $s[$i] => $o ];
   
$i += $o;
   
    if(
$i < strlen($s) ) {
       
groupby($s);
    }

    return
$a;
}

print_r(groupby($s));

?>
up
-3
ayaou dot mohammed at gmail dot com
4 years ago
This function doesn't  work with non ASCII characters

Exemple:

<?php

$subject
= "Comment ça va ma chérie";
$mask = "éèçà";

echo
strspn($subject,$mask); // Echo 0

?>

See, we expected  1 but 0 was the correct result
To Top