If you'd like to understand pack/unpack. There is a tutorial here in perl, that works equally well in understanding it for php:
http://perldoc.perl.org/perlpacktut.html
(PHP 4, PHP 5, PHP 7, PHP 8)
pack — Упаковать данные в бинарную строку
Упаковывает заданные аргументы в бинарную строку в соответствии с форматом в параметре
format
.
Идея этой функции была заимствована из Perl и все коды форматирования работают так же. Однако, есть некоторые отсутствующие коды форматирования, такие как код формата Perl "u".
Необходимо иметь в виду, что отличие между знаковыми и беззнаковыми значениями влияет только на функцию unpack(), тогда как функция pack() даёт одинаковый результат для знаковых и беззнаковых кодов формата.
format
Параметр format
задаётся в виде строки и состоит
из кодов формата и опционального аргумента повторения. Аргумент может быть
целочисленным, либо *
для повторения до конца введённых
данных. Для a, A, h, H число повторений определяет то, сколько символов
взято от одного аргумента данных, для @ - это абсолютная позиция для размещения
следующих данных, для всего остального число повторений определяет как много
аргументов данных было обработано и упаковано в результирующую бинарную строку.
Работающие на данный момент форматы:
Код | Описание |
---|---|
a | Строка (string) с NUL-заполнением |
A | Строка (string) со SPACE-заполнением |
h | Hex-строка (Hex string), с нижнего разряда |
H | Hex-строка (Hex string), с верхнего разряда |
c | знаковый символ (char) |
C | беззнаковый символ (char) |
s | знаковый short (всегда 16 бит, машинный байтовый порядок) |
S | беззнаковый short (всегда 16 бит, машинный байтовый порядок) |
n | беззнаковый short (всегда 16 бит, порядок big endian) |
v | беззнаковый short (всегда 16 бит, порядок little endian) |
i | знаковый integer (машинно-зависимый размер и порядок) |
I | беззнаковый integer (машинно-зависимый размер и порядок) |
l | знаковый long (всегда 32 бит, машинный порядок) |
L | беззнаковый long (всегда 32 бит, машинный порядок) |
N | беззнаковый long (всегда 32 бит, порядок big endian) |
V | беззнаковый long (всегда 32 бит, порядок little endian) |
q | signed long long (всегда 64 bit, машинный порядок) |
Q | беззнаковый long long (всегда 64 bit, машинный порядок) |
J | беззнаковый long long (всегда 64 bit, порядок big endian) |
P | беззнаковый long long (всегда 64 bit, порядок little endian) |
f | float (машинно-зависимые размер и представление) |
g | float (машинно-зависимые размер, порядок байт little endian) |
G | float (машинно-зависимые размер, порядок байт big endian) |
d | double (машинно-зависимые размер и представление) |
e | double (машинно-зависимые размер, порядок байт little endian) |
E | double (машинно-зависимые размер, порядок байт big endian) |
x | байт NUL |
X | Резервирование одного байта |
Z | Строка (string) с NUL-заполнением |
@ | NUL-заполнение до абсолютной позиции |
values
Возвращает бинарную строку, содержащую данные.
Версия | Описание |
---|---|
8.0.0 |
Функция больше не возвращает false в случае возникновения ошибки.
|
7.2.0 | Типы float и double поддерживают как обратный, так и прямой порядок передачи байтов. |
7.0.15,7.1.1 | Добавлены коды "e", "E", "g" и "G" для поддержки принудительного указания порядка байт для float и double. |
Пример #1 Пример использования pack()
<?php
$binarydata = pack("nvc*", 0x1234, 0x5678, 65, 66);
?>
Полученная бинарная строка длиной 6 байт будет содержать последовательность байтов 0x12, 0x34, 0x78, 0x56, 0x41, 0x42.
Необходимо отметить, что PHP сохраняет значения типа int как
знаковые с машинно-зависимым размером (C тип long
).
Все числа, переданные как int, но выходящие за границы этого типа будут сохранены с типом float.
При упаковке этих float как int, они будут переданы с типом int. Это может как совпадать, так и нет с заданным шаблоном.
Наиболее частым является случай, когда упаковываются беззнаковые числа типа int. В системах, где int имеет размер в 32 бита, число обычно передаётся по тому же шаблону, как если бы int был беззнаковым (хотя, это зависит от определённых преобразований из знаковое в беззнаковое, согласно стандарту С). В системах, где тип int имеет размер в 64 бита, тип float не имеет мантиссы, достаточной по размеру для хранения значения без потери точности. Если эти системы также имеют простой 64-битный С тип int
(большинство UNIX систем не имеют), то единственным путём для использования формата I
в верхнем разряде является создание отрицательных int значений с тем же представлением как и в определённом беззнаковом значении.
If you'd like to understand pack/unpack. There is a tutorial here in perl, that works equally well in understanding it for php:
http://perldoc.perl.org/perlpacktut.html
A helper class to convert integer to binary strings and vice versa. Useful for writing and reading integers to / from files or sockets.
<?php
class int_helper
{
public static function int8($i) {
return is_int($i) ? pack("c", $i) : unpack("c", $i)[1];
}
public static function uInt8($i) {
return is_int($i) ? pack("C", $i) : unpack("C", $i)[1];
}
public static function int16($i) {
return is_int($i) ? pack("s", $i) : unpack("s", $i)[1];
}
public static function uInt16($i, $endianness=false) {
$f = is_int($i) ? "pack" : "unpack";
if ($endianness === true) { // big-endian
$i = $f("n", $i);
}
else if ($endianness === false) { // little-endian
$i = $f("v", $i);
}
else if ($endianness === null) { // machine byte order
$i = $f("S", $i);
}
return is_array($i) ? $i[1] : $i;
}
public static function int32($i) {
return is_int($i) ? pack("l", $i) : unpack("l", $i)[1];
}
public static function uInt32($i, $endianness=false) {
$f = is_int($i) ? "pack" : "unpack";
if ($endianness === true) { // big-endian
$i = $f("N", $i);
}
else if ($endianness === false) { // little-endian
$i = $f("V", $i);
}
else if ($endianness === null) { // machine byte order
$i = $f("L", $i);
}
return is_array($i) ? $i[1] : $i;
}
public static function int64($i) {
return is_int($i) ? pack("q", $i) : unpack("q", $i)[1];
}
public static function uInt64($i, $endianness=false) {
$f = is_int($i) ? "pack" : "unpack";
if ($endianness === true) { // big-endian
$i = $f("J", $i);
}
else if ($endianness === false) { // little-endian
$i = $f("P", $i);
}
else if ($endianness === null) { // machine byte order
$i = $f("Q", $i);
}
return is_array($i) ? $i[1] : $i;
}
}
?>
Usage example:
<?php
Header("Content-Type: text/plain");
include("int_helper.php");
echo int_helper::uInt8(0x6b) . PHP_EOL; // k
echo int_helper::uInt8(107) . PHP_EOL; // k
echo int_helper::uInt8("\x6b") . PHP_EOL . PHP_EOL; // 107
echo int_helper::uInt16(4101) . PHP_EOL; // \x05\x10
echo int_helper::uInt16("\x05\x10") . PHP_EOL; // 4101
echo int_helper::uInt16("\x05\x10", true) . PHP_EOL . PHP_EOL; // 1296
echo int_helper::uInt32(2147483647) . PHP_EOL; // \xff\xff\xff\x7f
echo int_helper::uInt32("\xff\xff\xff\x7f") . PHP_EOL . PHP_EOL; // 2147483647
// Note: Test this with 64-bit build of PHP
echo int_helper::uInt64(9223372036854775807) . PHP_EOL; // \xff\xff\xff\xff\xff\xff\xff\x7f
echo int_helper::uInt64("\xff\xff\xff\xff\xff\xff\xff\x7f") . PHP_EOL . PHP_EOL; // 9223372036854775807
?>
Note that the the upper command in perl looks like this:
$binarydata = pack ("n v c*", 0x1234, 0x5678, 65, 66);
In PHP it seems that no whitespaces are allowed in the first parameter. So if you want to convert your pack command from perl -> PHP, don't forget to remove the whitespaces!
If you need to unpack a signed short from big-endian or little-endian specifically, instead of machine-byte-order, you need only unpack it as the unsigned form, and then if the result is >= 2^15, subtract 2^16 from it.
And example would be:
<?php
$foo = unpack("n", $signedbigendianshort);
$foo = $foo[1];
if($foo >= pow(2, 15)) $foo -= pow(2, 16);
?>
/* Convert float from HostOrder to Network Order */
function FToN( $val )
{
$a = unpack("I",pack( "f",$val ));
return pack("N",$a[1] );
}
/* Convert float from Network Order to HostOrder */
function NToF($val )
{
$a = unpack("N",$val);
$b = unpack("f",pack( "I",$a[1]));
return $b[1];
}
Coder's example is basically an explanation of bindec() and decbin(), not pack() and unpack().
Here's some code to convert a string binary expression into its binary-string equivalent and vice versa.
(Would be even simpler if pack/unpack offered a 'b' format code....)
<?php
function bin2bstr($input)
// Convert a binary expression (e.g., "100111") into a binary-string
{
if (!is_string($input)) return null; // Sanity check
// Pack into a string
return pack('H*', base_convert($input, 2, 16));
}
function bstr2bin($input)
// Binary representation of a binary-string
{
if (!is_string($input)) return null; // Sanity check
// Unpack as a hexadecimal string
$value = unpack('H*', $input);
// Output binary representation
return base_convert($value[1], 16, 2);
}
// Returns string(3) "ABC"
var_dump(bin2bstr('01000001 01000010 01000011'));
// Returns string(24) "010000010100001001000011"
var_dump(bstr2bin('ABC'));
?>
Be aware of format code H always padding the 0 for byte-alignment to the right (for odd count of nibbles).
So pack("H", "7") results in 0x70 (ASCII character 'p') and not in 0x07 (BELL character)
as well as pack("H*", "347") results in 0x34 ('4') and 0x70 ('p') and not 0x03 and 0x47.
a cool function to converrt numbers to Persian numbers(utf-8)
origin: http://www.farsiweb.info/jalali/jalali.phps
function farsinum($str)
{
$ret = "";
for ($i = 0; $i < strlen($str); ++$i) {
$c = $str[$i];
if( $c >= '0' && $c <= '9' )
$out .= pack("C*", 0xDB, 0xB0 + $c);
else
$ret .= $c;
}
return $ret;
}
<?PHP
function ntohs($port) {
$b=pack("N", $port);
return substr($b,2,2);
}
?>
I've spent a number of hours (n>=2) finding how to do this,
it works like the c function 'ntohs', used for eg the socks5 proxy protocol.
Even though in a 64-bit architecure intval(6123456789) = 6123456789, and sprintf('%b', 5000000000) = 100101010000001011111001000000000
pack will not treat anything passed to it as 64-bit. If you want to pack a 64-bit integer:
<?php
$big = 5000000000;
$left = 0xffffffff00000000;
$right = 0x00000000ffffffff;
$l = ($big & $left) >>32;
$r = $big & $right;
$good = pack('NN', $l, $r);
$urlsafe = str_replace(array('+','/'), array('-','_'), base64_encode($good));
//done!
//rebuild:
$unurl = str_replace(array('-','_'), array('+','/'), $urlsafe);
$binary = base64_decode($unurl);
$set = unpack('N2', $tmp);
print_r($set);
$original = $set[1] << 32 | $set[2];
echo $original, "\\r\\n";
?>
results in:
Array
(
[1] => 1
[2] => 705032704
)
5000000000
but ONLY on a 64-bit enabled machine and PHP distro.
You will get the same effect with
<?php
function _readInt($fp)
{
return unpack('V', fread($fp, 4));
}
?>
or unpack('N', ...) for big-endianness.
This is how I used pack to convert base2 to base64 since base_convert doesn't support base64
The base conversions don't work for long strings, which is why I convert 1 byte at a time
Hope this helps someone
function base2to64($base2) {
if ($remainbits = strlen($base2)%8) $base2 .= str_repeat('0',8-$remainbits);
$base64 = NULL;
for ($i=0;$i<strlen($base2);$i+=8) $base16 .= sprintf('%02x',bindec(sprintf('%08d',substr($base2,$i,8))));
return base64_encode(pack('H*',$base16));
}
function base64to2($base64) {
list($base16) = unpack('H*0',base64_decode($base64));
$base2 = NULL;
for ($i=0;$i<strlen($base16);$i++) $base2 .= sprintf('%04d',base_convert(substr($base16,$i,1),16,2));
return $base2;
}
pack()
h Hex string, low nibble first (not same hex2bin())
H Hex string, high nibble first (same hex2bin())
These two functions allow conversion between binary string and signed integer with possibility to give the bit length.
Usage:
<?php
echo si2bin(-10, 32);
11111111111111111111111111110110
echo si2bin(10, 32);
00000000000000000000000000001010
echo bin2si("11111111111111111111111111110110", 32);
-10
echo bin2si("00000000000000000000000000001010", 32);
10
// signed integer to binary
function si2bin($si, $bits=32)
{
if ($si >= -pow(2,$bits-1) and $si <= pow(2,$bits-1) )
{
if ($si >= 0) // positive or zero
{
$bin = base_convert($si,10,2);
// pad to $bits bit
$bin_length = strlen($bin);
if ($bin_length < $bits) $bin = str_repeat ( "0", $bits-$bin_length).$bin;
}
else // negative
{
$si = -$si-pow(2,$bits);
$bin = base_convert($si,10,2);
$bin_length = strlen($bin);
if ($bin_length > $bits) $bin = str_repeat ( "1", $bits-$bin_length).$bin;
}
return $bin;
}
}
// binary to signed integer
function bin2si($bin,$bits=32)
{
if (strlen($bin)==$bits)
{
if (substr($bin,0,1) == 0) // positive or zero
{
$si = base_convert($bin,2,10);
}
else // negative
{
$si = base_convert($bin,2,10);
$si = -(pow(2,$bits)-$si);
}
return $si;
}
}
?>
Using pack to write Arabic char(s) to a file.
<?php
$text = "㔆㘆㘆";
$text = mb_convert_encoding($text, "UCS-2BE", "HTML-ENTITIES");
$len = mb_strlen($text);
$bom = mb_convert_encoding("", "unicode", "HTML-ENTITIES");
$fp = fopen('text.txt', 'w');
fwrite($fp, pack('a2', $bom));
fwrite($fp, pack("a{$len}", $text));
fwrite($fp, pack('a2', $bom));
fwrite($fp, pack('a2', "\n"));
fclose($fp);
?>
You can use pack to strip the byte order mark (BOM) from a file.
For example, strip the UTF-8 BOM:
<?php
// Strips the UTF-8 mark: (hex value: EF BB BF)
function trimUTF8BOM($data){
if(substr($data, 0, 3) == pack('CCC', 239, 187, 191)) {
return substr($data, 3);
}
return $data;
}
?>
This function could be easily adjusted to match any byte order mark. Have a look at wikipedia for a full list of hex codes for each specific encoding.
- Gerard
If you're bugged by http://bugs.php.net/bug.php?id=5889 then you can try this:
Use igbinary-serialize if you don't mind a little overhead.
Or intarray (by the same person) if you don't mind using a slightly experimental package which may have problems sharing data between differently byte/bit ordered architectures.
I don't believe it would be too difficult to shove a serialize function and unserialize function in there if you rip out the code from igbinary for storing numeric arrays with the correct endianess. Looking at `igbinary_serialize32` and `igbinary_unserialize32` in igbinary.c it should be very easy to copy that functionality to intarray.c.
Take away the "<<0" though, that's just stupid :P
Ref: http://opensource.dynamoid.com/
When trying to create a ZIP file using the pack function - I experienced trouble with the "a" code - It converted all chars correct from the std. ASCII charset but not more language specific like ÆøÅ.
It seems that ZIP files do not use the same HEX for these as everything else does.
The fix was a quick workaround but you'll probably get the picture:
function UniHex($str) {
// æ ø å Æ Ø Å
//These are simply one HEX code being replaced by another to correct the issue
$except = array("E6"=>"91","F8"=>"9B","E5"=>"86","C6"=>"92","D8"=>"9D", "C5"=>"8F");
for($i = 0; $i < strlen($str); $i++) {
$hex = bin2hex(substr($str, $i, 1));
if ($except[strtoupper($hex)])
$hex = $except[strtoupper($hex)];
$return .= $hex;
}
return $return;
}
And then i replaced an "a100" code with "H".strlen(uniHex($mystring))
This is like i said a quick workaround, but if you find the real reason for this i'd be happy to see it
How to convert an integer to raw data, specifying the amount of bytes to convert to (will be padded with 0's):
public function toRaw($int, $bytes = 4)
{
$hex = dechex($int);
if (strlen($hex) % 2 != 0)
$hex = '0'. $hex;
$arr = str_split($hex, 2);
while (count($arr) < $bytes)
array_unshift($arr, 0);
$arr = array_map('hexdec', $arr);
$arr = array_map('chr', $arr);
return join('', array_reverse($arr));
}