crypt

(PHP 4, PHP 5, PHP 7, PHP 8)

cryptНеобратимое хеширование строки

Внимание

Эта функция (пока) небезопасна для обработки данных в двоичной форме!

Описание

crypt(string $string, string $salt): string

crypt() возвращает хешированную строку, полученную с помощью стандартного алгоритма UNIX, основанного на DES или другого алгоритма. Функция password_verify() совместима с crypt(). Следовательно, хеши паролей, созданные crypt(), могут быть использованы в password_verify().

До версии PHP 8.0.0 параметр salt был необязательным. Однако функция crypt() создаёт слабый хеш без параметра salt, а без него выдаёт ошибку уровня E_NOTICE. Убедитесь, что используете достаточно сложную соль для лучшей безопасности.

Функция password_hash() использует сложный хеш, генерирует сложную соль и применяет правильно количество раундов хеширования автоматически. password_hash() является простой обёрткой над crypt() и совместима с существующими хешами паролей. Поэтому приветствуется использование password_hash().

Вид хеширования определяется переданным аргументом salt (соль). Если соль не указана, будет автоматически сгенерирована стандартная случайная двухсимвольная (DES) или двенадцатисимвольная (MD5) соль, в зависимости от доступности алгоритма MD5 в crypt(). Предопределённая константа CRYPT_SALT_LENGTH позволяет определить максимально доступную длину соли в соответствии с используемыми алгоритмами.

Стандартная функция crypt() на основе DES возвращает соль в качестве первых двух символов возвращаемой строки. Кроме того, она использует только первые восемь символов строки string, поэтому более длинные строки, начинающиеся с тех же восьми символов, сгенерируют один и тот же результат (при использовании одинаковой соли).

Поддерживаются следующие типы хешей:

  • CRYPT_STD_DES - Стандартное DES-шифрование с двухсимвольной солью из алфавита "./0-9A-Za-z""./0-9A-Za-z". Использование других символов в соли повлечёт за собой отказ работы crypt().
  • CRYPT_EXT_DES - Расширенное DES-шифрование. "Соль" является 9-символьной строкой, состоящая из символа подчёркивания, за которым следуют 4 символа счётчика итерации и 4 символа соли. Каждая из этих 4-символьных строк кодирует 24 бита, наименьший символ первым. Значения от 0 до 63 кодируются как ./0-9A-Za-z. Использование недопустимых символов в соли приведёт к ошибке crypt().
  • CRYPT_MD5 - MD5-шифрование с 12-символьной солью, начинающейся с $1$
  • CRYPT_BLOWFISH - Blowfish-шифрование со следующей солью: "$2a$", "$2x$" или "$2y$", весовой параметр из двух цифр, "$" и 22 цифры из алфавита "./0-9A-Za-z". Использование других символов в соли повлечёт за собой возврат пустой строки. Весовой параметр из двух цифр является двоичным логарифмом счётчика итераций нижележащего хеширующего алгоритма, основанного на Blowfish, и должен быть в диапазоне 04-31, значения вне данного диапазона вызовут отказ crypt(). Хеши "$2x$" потенциально слабые; Хэши "$2a$" совместимы и смягчают эту слабость. Для новых хэшей следует использовать "$2y$".
  • CRYPT_SHA256 - хеш SHA-256 с шестнадцатисимвольной солью, начинающейся с $5$. Если строка с солью начинается с 'rounds=<N>$', число N будет использовано для обозначения количества раундов хеширования, по аналогии с весовым параметром в Blowfish. По умолчанию используемое количество раундов равно 5000, минимально доступно 1000 и максимально 999,999,999. Любое значение вне этого диапазона будет усечено до ближайшего лимита.
  • CRYPT_SHA512 - хеш SHA-512 с шестнадцатисимвольной солью, начинающейся с $6$. Если строка с солью начинается с 'rounds=<N>$', число N будет использовано для обозначения количества раундов хеширования, по аналогии с весовым параметром в Blowfish. По умолчанию используемое количество раундов равно 5000, минимально доступно 1000 и максимально 999,999,999. Любое значение вне этого диапазона будет усечено до ближайшего лимита.

Список параметров

string

Хешируемая строка.

Предостережение

При использовании алгоритма CRYPT_BLOWFISH, параметр string обрезается до 72 байт.

salt

Параметр с солью, на которой будет основано хеширование. Если не указан, поведение определяется по наличию реализованных алгоритмов в системе и может привести к неожиданным результатам.

Возвращаемые значения

Возвращает хешированную строку или строку короче 13 символов, гарантированно отличающуюся от соли в случае возникновения ошибки.

Внимание

При валидации паролей должны использоваться функции сравнения строк, устойчивые к атаке по времени, для сравнения вывода функции crypt() с известным хешом. В PHP для этих целей есть функция hash_equals().

Список изменений

Версия Описание
8.0.0 salt больше не является необязательным.

Примеры

Пример #1 Пример использования crypt()

<?php
// соль будет сгенерирована автоматически; не рекомендуется
$user_input = 'rasmuslerdorf';
$hashed_password = '$6$rounds=1000000$NJy4rIPjpOaU$0ACEYGg/aKCY3v8O8AfyiO7CTfZQ8/W231Qfh2tRLmfdvFD6XfHk12u6hMr9cYIA4hnpjLNSTRtUwYr9km9Ij/';

// Проверка существующего хеша crypt() способом, совместимым с программами, не использующими PHP.
if (hash_equals($hashed_password, crypt($user_input, $hashed_password))) {
echo
"Пароль верен!";
}
?>

Пример #2 Использование crypt() с различными видами хешей

<?php
/* Приведённая соль является только примером. Не используйте эту же соль в вашем коде.
Вы должны сгенерировать уникальную и правильную соль для каждого пароля.
*/
echo 'Стандартный DES: ',
crypt('rasmuslerdorf', 'rl'),
"\n";
echo
'Расширенный DES: ',
crypt('rasmuslerdorf', '_J9..rasm'),
"\n";
echo
'MD5: ',
crypt('rasmuslerdorf', '$1$rasmusle$'),
"\n";
echo
'Blowfish: ',
crypt('rasmuslerdorf', '$2a$07$usesomesillystringforsalt$'),
"\n";
echo
'SHA-256: ',
crypt('rasmuslerdorf', '$5$rounds=5000$usesomesillystringforsalt$'),
"\n";
echo
'SHA-512: ',
crypt('rasmuslerdorf', '$6$rounds=5000$usesomesillystringforsalt$'),
"\n";
?>

Вывод приведённого примера будет похож на:

Стандартный DES: rl.3StKT.4T8M
Расширенный DES: _J9..rasmBYk8r9AiWNc
MD5:          $1$rasmusle$rISCgZzpwk3UhDidwXvin0
Blowfish:     $2y$07$usesomesillystringfore2uDLvp1Ii2e./U9C8sBjqp8I90dH6hi
SHA-256:      $5$rounds=5000$usesomesillystri$KqJWpanXZHKq2BOB43TSaYhEWsQ1Lr5QNyPCDH/Tp.6
SHA-512:      $6$rounds=5000$usesomesillystri$D4IrlXatmP7rx3P3InaxBeoomnAihCKRVQP22JZ6EY47Wc6BkroIuUUBOov1i.S5KPgErtP/EN5mcO.ChWQW21

Примечания

Замечание: Функция расшифровки отсутствует, так как crypt() использует необратимый алгоритм хеширования.

Смотрите также

  • hash_equals() - Сравнивает строки без риска атаки по времени
  • password_hash() - Создаёт хеш пароля
  • Страница руководства Unix по вашей функции crypt

add a note add a note

User Contributed Notes 8 notes

up
63
bob dot orr at mailinator dot com
9 years ago
The #2 comment on this comments page (as of Feb 2015) is 9 years old and recommends phpass.  I have independently security audited this product and, while it continues to be recommended for password security, it is actually insecure and should NOT be used.  It hasn't seen any updates in years (still at v0.3) and there are more recent alternatives such as using the newer built-in PHP password_hash() function that are much better.  Everyone, please take a few moments to confirm what I'm saying is accurate (i.e. review the phpass code for yourself) and then click the down arrow to sink the phpass comment to the bottom.  You'll be increasing security across the Internet by doing so.

For those who want details:  md5() with microtime() are a fallback position within the source code of phpass.  Instead of terminating, it continues to execute code.  The author's intentions of trying to work everywhere are admirable but, when it comes to application security, that stance actually backfires.  The only correct answer in a security context is to terminate the application rather than fallback to a weak position that can potentially be exploited (usually by forcing that weaker position to happen).
up
16
Marten Jacobs
10 years ago
As I understand it, blowfish is generally seen a secure hashing algorithm, even for enterprise use (correct me if I'm wrong). Because of this, I created functions to create and check secure password hashes using this algorithm, and using the (also deemed cryptographically secure) openssl_random_pseudo_bytes function to generate the salt.

<?php
/*
* Generate a secure hash for a given password. The cost is passed
* to the blowfish algorithm. Check the PHP manual page for crypt to
* find more information about this setting.
*/
function generate_hash($password, $cost=11){
       
/* To generate the salt, first generate enough random bytes. Because
         * base64 returns one character for each 6 bits, the we should generate
         * at least 22*6/8=16.5 bytes, so we generate 17. Then we get the first
         * 22 base64 characters
         */
       
$salt=substr(base64_encode(openssl_random_pseudo_bytes(17)),0,22);
       
/* As blowfish takes a salt with the alphabet ./A-Za-z0-9 we have to
         * replace any '+' in the base64 string with '.'. We don't have to do
         * anything about the '=', as this only occurs when the b64 string is
         * padded, which is always after the first 22 characters.
         */
       
$salt=str_replace("+",".",$salt);
       
/* Next, create a string that will be passed to crypt, containing all
         * of the settings, separated by dollar signs
         */
       
$param='$'.implode('$',array(
               
"2y", //select the most secure version of blowfish (>=PHP 5.3.7)
               
str_pad($cost,2,"0",STR_PAD_LEFT), //add the cost in two digits
               
$salt //add the salt
       
));
      
       
//now do the actual hashing
       
return crypt($password,$param);
}

/*
* Check the password against a hash generated by the generate_hash
* function.
*/
function validate_pw($password, $hash){
       
/* Regenerating the with an available hash as the options parameter should
         * produce the same hash if the same password is passed.
         */
       
return crypt($password, $hash)==$hash;
}
?>
up
9
steve at tobtu dot com
11 years ago
To generate salt use mcrypt_create_iv() not mt_rand() because no matter how many times you call mt_rand() it will only have at most 32 bits of entropy. Which you will start seeing salt collisions after about 2^16 users. mt_rand() is seeded poorly so it should happen sooner.

For bcrypt this will actually generate a 128 bit salt:
<?php $salt = strtr(base64_encode(mcrypt_create_iv(16, MCRYPT_DEV_URANDOM)), '+', '.'); ?>

*** Bike shed ***
The last character in the 22 character salt is 2 bits.
base64_encode() will have these four character "AQgw"
bcrypt will have these four character ".Oeu"

You don't need to do a full translate because they "round" to different characters:
echo crypt('', '$2y$05$.....................A') . "\n";
echo crypt('', '$2y$05$.....................Q') . "\n";
echo crypt('', '$2y$05$.....................g') . "\n";
echo crypt('', '$2y$05$.....................w') . "\n";

$2y$05$......................J2ihDv8vVf7QZ9BsaRrKyqs2tkn55Yq
$2y$05$.....................O/jw2XygQa2.LrIT7CFCBQowLowDP6Y.
$2y$05$.....................eDOx4wMcy7WU.kE21W6nJfdMimsBE3V6
$2y$05$.....................uMMcgjnOELIa6oydRivPkiMrBG8.aFp.
up
7
kaminski at istori dot com
13 years ago
Here is an expression to generate pseudorandom salt for the CRYPT_BLOWFISH hash type:

<?php $salt = substr(str_replace('+', '.', base64_encode(pack('N4', mt_rand(), mt_rand(), mt_rand(), mt_rand()))), 0, 22); ?>

It is intended for use on systems where mt_getrandmax() == 2147483647.

The salt created will be 128 bits in length, padded to 132 bits and then expressed in 22 base64 characters.  (CRYPT_BLOWFISH only uses 128 bits for the salt, even though there are 132 bits in 22 base64 characters.  If you examine the CRYPT_BLOWFISH input and output, you can see that it ignores the last four bits on input, and sets them to zero on output.)

Note that the high-order bits of the four 32-bit dwords returned by mt_rand() will always be zero (since mt_getrandmax == 2^31), so only 124 of the 128 bits will be pseudorandom.  I found that acceptable for my application.
up
0
jette at nerdgirl dot dk
10 years ago
The crypt() function cant handle plus signs correctly. So if for example you are using crypt in a login function, use urlencode on the password first to make sure that the login procedure can handle any character:

<?php
$user_input
'12+#æ345';
$pass = urlencode($user_input));
$pass_crypt = crypt($pass);

if (
$pass_crypt == crypt($pass, $pass_crypt)) {
  echo
"Success! Valid password";
} else {
  echo
"Invalid password";
}
?>
up
-10
Anonymous
6 years ago
steve at tobtu dot com was right 4 years ago, but now mcrypt_create_iv()  (and bcrypt in general) is deprecated!

Use random_bytes() instead:

<?php
$salt
= base64_encode(random_bytes(16));
up
-15
ian+php dot net at eiloart dot ocm
9 years ago
If you're stuck with CRYPT_EXT_DES, then you'll want to pick a number of iterations: the 2nd-5th characters of the "salt".

My experimentation suggests that the 5th character is the most significant. A '.' is a zero and 'Z' is the highest value. Using all dots will create an error: all passwords will be encrypted to the same value.

Here are some encryption timings (in seconds) that I obtained, with five different iteration counts over the same salt, and the same password, on a quad core 2.66GHz Intel Xeon machine.

_1111 time: 0.15666794776917
_J9.Z time: 1.8860530853271
_J9.. time: 0.00015401840209961
_...Z time: 1.9095730781555
_ZZZZ time: 1.9124970436096
_...A time: 0.61211705207825

I think a half a second is reasonable for an application, but for the back end authentication? I'm not so sure: there's a significant risk of overloading the back end if we're getting lots of authentication requests.
up
-10
Joey
6 years ago
While the documentation says that crypt will fail for DES if the salt is invalid, this turns out to not be the case.

The crypt function will accept any string of two characters or more for DES as long as it doesn't match the pattern for any other hashing schema. The remaining characters will be ignored.
To Top