unset

(PHP 4, PHP 5, PHP 7, PHP 8)

unsetRemove a definição de uma variável informada

Descrição

unset(mixed $var, mixed ...$vars): void

unset() destrói as variáveis especificadas.

O comportamento de unset() dentro de uma função pode variar dependendo de qual tipo de variável está tentando-se destruir.

Se uma variável global tornar-se indefinida por unset() dentro de uma função, apenas a variável local é destruída. A variável no ambiente que chamou a função manterá o mesmo valor anterior à chamada a unset().

<?php
function destroy_foo()
{
global
$foo;
unset(
$foo);
}

$foo = 'bar';
destroy_foo();
echo
$foo;
?>

O exemplo acima produzirá:

bar

Para remover a definição de uma variável global usando unset() dentro de uma função, use o array $GLOBALS:

<?php
function foo()
{
unset(
$GLOBALS['bar']);
}

$bar = "something";
foo();
?>

Se uma variável que é PASSADA POR REFERÊNCIA tiver sua definição removida por unset() dentro de uma função, apenas a variável local é destruída. A variável no ambiente que chamou a função manterá o mesmo valor anterior à chamada a unset().

<?php
function foo(&$bar)
{
unset(
$bar);
$bar = "blah";
}

$bar = 'something';
echo
"$bar\n";

foo($bar);
echo
"$bar\n";
?>

O exemplo acima produzirá:

something
something

Se uma variável estática tiver a definição removida por unset() dentro de uma função, unset() destrói a variável apenas no contexto do resto da função. Chamadas subsequentes à função irão restaurar o valor anterior da variável.

<?php
function foo()
{
static
$bar;
$bar++;
echo
"Antes de unset: $bar, ";
unset(
$bar);
$bar = 23;
echo
"depois de unset: $bar\n";
}

foo();
foo();
foo();
?>

O exemplo acima produzirá:

Antes de unset: 1, depois de unset: 23
Antes de unset: 2, depois de unset: 23
Antes de unset: 3, depois de unset: 23

Parâmetros

var

A variável que terá sua definição removida.

vars

Mais variáveis que terão definições removidas.

Valor Retornado

Nenhum valor é retornado.

Exemplos

Exemplo #1 Exemplo de unset()

<?php
// destrói uma única variável
unset($foo);

// destrói um único elemento de um array
unset($bar['quux']);

// destrói mais de uma variável
unset($foo1, $foo2, $foo3);
?>

Exemplo #2 Usando a conversão (unset)

A conversão (unset) é frequentemente confundida com a função unset() function. A conversão (unset) serve apenas como uma conversão para tipo NULL, para completude. Ela não altera a variável que ela está convertendo. A conversão (unset) tornou-se defasada a partir do PHP 7.2.0, e foi removida a partir do PHP 8.0.0.

<?php
$name
= 'Felipe';

var_dump((unset) $name);
var_dump($name);
?>

O exemplo acima produzirá:

NULL
string(6) "Felipe"

Notas

Nota: Como esta é uma construção da linguagem e não uma função, ela não pode ser chamada usando funções variáveis ou argumentos nomeados.

Nota:

É possível remover definições de propriedades de objeto visíveis no contexto atual.

Se declarados, o método __get() é chamado ao acessar uma propriedade indefinida, e o método __set() é chamado ao definir uma propriedade indefinida.

Nota:

Não é possível remover a definição de $this dentro de um método do objeto.

Nota:

Ao usar unset() em propriedades de objeto inacessíveis, o método de sobrecarga __unset() será chamado, caso esteja declarado.

Veja Também

add a note add a note

User Contributed Notes 31 notes

up
477
Phantasma_9 at yahoo dot com
7 years ago
This is probably trivial but there is no error for unsetting a non-existing variable.
up
155
Hayley Watson
11 years ago
You don't need to check that a variable is set before you unset it.
<?php
unset($a);
?>
is harmless.
<?php
if(isset($a)) {
    unset(
$a);
}
?>
is pointless complication.

This doesn't apply to properties of objects that have __isset() methods that visibly change object state or __unset() methods that don't properly check their arguments or have extra side effects.

The latter case means that __unset shouldn't do more than what it says on the tin, and also has the responsibility for checking (possibly using __isset()) that what it's being asked to do makes sense.

The former case is just plain bad design.
up
43
nox at oreigon dot de
15 years ago
if you try to unset an object, please be careful about references.

Objects will only free their resources and trigger their __destruct method when *all* references are unsetted.
Even when they are *in* the object... sigh!

<?php

class A {
  function
__destruct() {
    echo
"cYa later!!\n";
  }
}

$a = new A();
$a -> a = $a;
#unset($a); # Just uncomment, and you'll see

echo "No Message ... hm, what now?\n";
unset(
$a -> a);
unset(
$a);

echo
"Finally that thing is gone\n";

?>

Of course the object completely dies at the end of the script.
up
45
Kai Kunstmann
16 years ago
Since unset() is a language construct, it cannot be passed anything other than a variable. It's sole purpose is to "unset" this variable, ie. to remove it from the current scope and destroy it's associated data. This is true especially for reference variables, where not the actual value is destroyed but the reference to that value. This is why you can't wrap 'unset()' in a user defined function: You would either unset a copy of the data if the parameter is passed by value, or you would just unset the reference variable within the functions scope if the parameter is passed by reference. There is no workaround for that, as you cannot pass 'scope' to a function in PHP. Such a function can only work for variables that exist in a common or global scope (compare 'unset($_GLOBALS[variable])').

I don't know how PHP handles garbage collection internally, but I guess this behavior can result in a huge memory leak: if a value variable goes out of scope with a second variable still holding a reference to the in-memory value, then unsetting that reference would still hold the value in memory but potentially unset the last reference to that in-memory data, hence: occupied memory that is rendered useless as you cannot reference it anymore.
up
36
j dot vd dot merwe at enovision dot net
13 years ago
A sample how to unset array elements from an array result coming from a mysql request. In this sample it is checking if a file exists and removes the row from the array if it not exists.

<?php
$db
->set_query("select * from documents where document_in_user = 0"); //1 
$documents = $db->result_to_array($db->get_result()); //1

foreach ($documents as $key => $row) { //2

   
$file     = "uploads/".rawurldecode($row['document_name']);
 
    if (
file_exists ( $file ) == FALSE ) {
         unset(
$documents[$key]);  //3
   

}

$documents = array_values($documents); // reindex the array (4)
?>

variables:
mysql table = documents,
array = $documents
array key (index) = $key
array row (record sort of speak) = $row

explanation:

1.
it gets the array from the table (mysql)

2.
foreach goes through the array $documents

3.
unset if record does not exist

4.
the array_values($documents) reindexes the $documents array, for otherwise you might end up in trouble when your  process will start expecting an array starting with key ($key) 0 (zero).
up
36
franckraynal at free dot fr
19 years ago
Here is another way to make 'unset' work with session variables from within a function :

<?php
function unsetSessionVariable ($sessionVariableName) {
   unset(
$GLOBALS[_SESSION][$sessionVariableName]);
}
?>

May it work with others than me...
F.
up
35
andre at twg dot com dot au
20 years ago
Only This works with register_globals being 'ON'.

unset( $_SESSION['variable'] );

The above will not work with register_globals turned on (will only work outside of a function).

$variable = $_SESSION['variable'];
unset( $_SESSION['variable'], $variable );

The above will work with register_globals on & inside a function
up
25
hessodreamy at gmail dot com
17 years ago
To clarify what hugo dot dworak at gmail dot com said about unsetting things that aren't already set:

unsetting a non-existent key within an array does NOT throw an error.
<?
$array = array();

unset($array[2]);
//this does not throw an error

unset($array[$undefinedVar]);
//Throws an error because of the undefined variable, not because of a non-existent key.
?>
up
25
anon at no spam dot no address dot com
19 years ago
Adding on to what bond at noellebond dot com said, if you want to remove an index from the end of the array, if you use unset, the next index value will still be what it would have been.

Eg you have
<?php
$x
= array(1, 2);

for (
$i = 0; $i < 5; $i++)
{
    unset(
$x[(count($x)-1)]); //remove last set key in the array

   
$x[] = $i;
}
?>

You would expect:
Array([0] => 1, [1] => 4)
as you want it to remove the last set key....

but you actually get
Array ( [0] => 1 [4] => 2 [5] => 3 [6] => 4 )

This is since even though the last key is removed, the auto indexing still keeps its previous value.

The only time where this would not seem right is when you remove a value off the end. I guess different people would want it different ways.

The way around this is to use array_pop() instead of unset() as array_pop() refreshes the autoindexing thing for the array.
<?php
$x
= array(1, 2);

for (
$i = 0; $i < 5; $i++)
{
   
array_pop($x); // removes the last item in the array

   
$x[] = $i;
}
?>

This returns the expected value of x = Array([0] => 1, [1] => 4);

Hope this helps someone who may need this for some odd reason, I did.
up
20
no at spam dot com
18 years ago
In addition to what timo dot hummel at 4fb dot de said;

>For the curious: unset also frees memory of the variable used.
>
>It might be possible that the in-memory size of the PHP Interpreter isn't reduced, but your scripts won't touch the memory_limit boundary. Memory is reused if you declare new variables.

It might be worth adding that functions apparently don't free up memory on exit the same way unset does..
Maybe this is common knowledge, but although functions destroys variables on exit, it (apparently) doesn't help the memory.

So if you use huge variables inside functions, be sure to unset them if you can before returning from the function.

In my case, if I did not unset before return, then the script would use 20 MB more of memory than if I did unset.
This was tested with php 5.0.4 on apache 2 on windows xp, with no memory limit.

Before I did the test, I was under the impression that when you exit from functions, the memory used inside it would be cleared and reused. Maybe this should be made clear in the manual, for either unset() or in the chapter for functions.
up
16
pfreilly at umd dot umich dot edu
12 years ago
Despite much searching, I have not yet found an explanation as to how one can manually free resources from variables, not so much objects, in PHP.  I have also seen many comments regarding the merits and demerits of unset() versus setting a variable to null.  Thus, here are the results of some benchmarks performed comparing unset() of numerous variables to setting them to null (with regards to memory usage and processing time):

10 variables:
Unset:
Memory Usage: 296
Time Elapsed: 1.0013580322266E-5

Null set:
Memory Usage: 1736
Time Elapsed: 5.9604644775391E-6

50 variables:
Unset:
Memory Usage: 296
Time Elapsed: 3.6001205444336E-5

Null set:
Memory Usage: 8328
Time Elapsed: 3.2901763916016E-5

100 variables:
Unset:
Memory Usage: 296
Time Elapsed: 5.6982040405273E-5

Null set:
Memory Usage: 15928
Time Elapsed: 5.8174133300781E-5

1000 variables:
Unset:
Memory Usage: 296
Time Elapsed: 0.00041294097900391

Null set:
Memory Usage: 168096
Time Elapsed: 0.00067591667175293

10000 variables:
Unset:
Memory Usage: 296
Time Elapsed: 0.0042569637298584

Null set:
Memory Usage: 1650848
Time Elapsed: 0.0076930522918701

100000 variables:
Unset:
Memory Usage: 296
Time Elapsed: 0.042603969573975

Null set:
Memory Usage: 16249080
Time Elapsed: 0.087724924087524

300000 variables:
Unset:
Memory Usage: 296
Time Elapsed: 0.13177299499512

Null set:
Memory Usage: 49796320
Time Elapsed: 0.28617882728577

Perhaps my test code for the null set was flawed, but despite that possibility it is simple to see that unset() has minimal processing time impact, and no apparent memory usage impact (unless the values returned by memory_get_usage() are flawed).  If you truly care about the ~4 microseconds saved over <50 variables, more power to you.  Otherwise, use unset() to minimize script impact on your system.
Note: Tested on PHP 5.3.8 installed via RPM on Fedora 14
up
18
clark at everettsconsulting dot com
18 years ago
In PHP 5.0.4, at least, one CAN unset array elements inside functions from arrays passed by reference to the function.
As implied by the manual, however, one can't unset the entire array by passing it by reference.

<?php
function remove_variable (&$variable// pass variable by reference
{
    unset(
$variable);
}

function
remove_element (&$array, $key) // pass array by reference
{
    unset(
$array[$key]);
}

$scalar = 'Hello, there';
echo
'Value of $scalar is: ';
print_r ($scalar); echo '<br />';
// Value of $scalar is: Hello, there

remove_variable($scalar); // try to unset the variable
echo 'Value of $scalar is: ';
print_r ($scalar); echo '<br />';
// Value of $scalar is: Hello, there

$array = array('one' => 1, 'two' => 2, 'three' => 3);
echo
'Value of $array is: ';
print_r ($array); echo '<br />';
// Value of $array is: Array ( [one] => 1 [two] => 2 [three] => 3 )

remove_variable($array); // try to unset the array
echo 'Value of $array is: ';
print_r ($array); echo '<br />';
// Value of $array is: Array ( [one] => 1 [two] => 2 [three] => 3 )

remove_element($array, 'two'); // successfully remove an element from the array
echo 'Value of $array is: ';
print_r ($array); echo '<br />';
// Value of $array is: Array ( [one] => 1 [three] => 3 )

?>
up
12
phpmanual at kennel17 dot co dot uk
14 years ago
Note that PHP 4 will generate a warning if you try to unset an array index that doesn't exist and whose parent doesn't exist.

Example:

<?php

  $foo
= array();

  unset(
$foo['Bar']['Baz']);

?>

RESULT: "Notice:  Undefined index:  Bar"

On PHP5 no error is raised, which seems to me like the correct behaviour.

Note that using unset($foo['Bar']) in the above example does not generate a warning in either version.

(Tested on 4.4.9 and 5.2.4)
up
14
Anonymous
17 years ago
Just to confirm, USING UNSET CAN DESTROY AN ENTIRE ARRAY. I couldn't find reference to this anywhere so I decided to write this.

The difference between using unset and using $myarray=array(); to unset is that obviously the array will just be overwritten and will still exist.

<?php

$myarray
=array("Hello","World");

echo
$myarray[0].$myarray[1];

unset(
$myarray);
//$myarray=array();

echo $myarray[0].$myarray[1];

echo
$myarray;
?>

Output with unset is:
<?
HelloWorld

Notice: Undefined offset: 0 in C:\webpages\dainsider\myarray.php on line 10

Notice: Undefined offset: 1 in C:\webpages\dainsider\myarray.php on line 10

Output with $myarray=array(); is:
?>

<?
HelloWorld

Notice: Undefined offset: 0 in C:\webpages\dainsider\myarray.php on line 10

Notice: Undefined offset: 1 in C:\webpages\dainsider\myarray.php on line 10

Array
?>
up
14
thorry at thorry dot net
19 years ago
The documentation is not entirely clear when it comes to static variables. It says:

If a static variable is unset() inside of a function, unset() destroys the variable and all its references.

<?php
function foo()
{
   static
$a;
  
$a++;
   echo
"$a\n";
   unset(
$a);
}

foo();
foo();
foo();
?> 

The above example would output:

1
2
3

And it does! But the variable is NOT deleted, that's why the value keeps on increasing, otherwise the output would be:

1
1
1

The references are destroyed within the function, this handeling is the same as with global variables, the difference is a static variable is a local variable.

Be carefull using unset and static values as the output may not be what you expect it to be. It appears to be impossible to destroy a static variable. You can only destroy the references within the current executing function, a successive static statement will restore the references.

The documentation would be better if it would say:
"If a static variable is unset() inside of a function, unset() destroys all references to the variable. "

Example: (tested PHP 4.3.7)
<?php
function foo()
{
   static
$a;
  
$a++;
   echo
"$a\n";
   unset(
$a);
   echo
"$a\n";
   static
$a;   
   echo
"$a\n";
}

foo();
foo();
foo();
?>

Would output:

1

1
2

2
3

3
up
10
pauljamescampbell at gmail dot com
16 years ago
Here's my variation on the slightly dull unset method. It throws in a bit of 80's Stallone action spice into the mix. Enjoy!

<?php
/**
* function rambo (first blood)
*
* Completely and utterly destroys everything, returning the kill count of victims
*
* @param    It don't matter, it’s Rambo baby
* @return    Integer    Body count (but any less than 500 and it's not really worth mentioning)
*/
function rambo() {

   
// Get the victims and initiate that body count status
   
$victims = func_get_args();
   
$body_count = 0;   
   
   
// Kill those damn punks
   
foreach($victims as $victim) {
        if(
$death_and_suffering = @unset($victim)) {
           
$body_count++;
        }
    }
   
   
// How many kills did Rambo tally up on this mission?
   
return($body_count);
}
?>
up
12
dan AT --nospam-- cubeland DOT co DOT uk
19 years ago
dh at argosign dot de -
it is possible to unset globals from within functions thanks to the $GLOBALS array:

<?php
$x
= 10;

function
test() {
   
// don't need to do ' global $x; '
   
unset ($GLOBALS['x']);
    echo
'x: ' . $GLOBALS['x'] . '<br />';
}

test();
echo
"x: $x<br />";

// will result in
/*
x:
x:
*/
?>
up
8
lion_cat at mail ru
15 years ago
about unset for arrays

if you unset the last array member
$ar[0]==2
$ar[1]==7
$ar[2]==9

unset ($ar[2])

after addition a new member by $ar[]=7,

you will get
$ar[0]==2
$ar[1]==7
$ar[3]==7,

So, unset has no effect to internal array counter!!!
up
6
Anonymous
13 years ago
further I realized that an object, when getting detroyed, does care about destroying variable in object space visibility but not those in local visibility, be aware of the found pattern:

<?php
class release_test{
  private
$buffer;
  private
$other_object;
  public function
__construct(){
   
$this->other_object=new other_object_class();
  }
  public function
__destruct(){
   
//note that you always have to unset class objects, in order to get the resources released
   
unset($this->other_object);
  }
  public
allocate_mem_A(){
   
$this->buffer=file("/tmp/bigfile");
  }
  public
allocate_mem_B(){
   
$buffer=file("/tmp/bigfile");
  }
  public
allocate_mem_C(){
   
$buffer=file("/tmp/bigfile");
    unset(
$buffer);
  }
  public
allocate_mem_D(){
   
$this->other_buffer=file("/tmp/bigfile");
  }
}

//this does not lead to a resource problem
$A=new release_test();
$A->allocate_mem_A();
$A->__destruct();
unset(
$A);

//this DOES lead to a resource problem
$B=new release_test();
$B->allocate_mem_B();
$B->__destruct();
unset(
$B);

//this does not lead to a resource problem
$C=new release_test();
$C->allocate_mem_C();
$C->__destruct();
unset(
$C);

//this does not lead to a resource problem
$D=new release_test();
$D->allocate_mem_D();
$D->__destruct();
unset(
$D);
?>
up
7
dibakar dot datta at gmail dot com
17 years ago
Instead of using the unset function  for unregistering your session or other array values you can also do this samll feature and get this task done with just 1 line code.

Suppose, if you like to unregister your session store values.
You can use:

      $_SESSION = array();

Well this syntax saves lot's of time instead of unsetting each values.
up
8
warhog at warhog dot net
20 years ago
you may wan't to unset all variables which are defined, here's one way:

<?php

function unset_all_vars($a)
{ foreach(
$a as $key => $val)
  { unset(
$GLOBALS[$key]); }
  return
serialize($a); }

unset_all_vars(get_defined_vars());

?>

you can also save than a serialized var of the "memory" and perhaps store this in a temporary file.. very usefull if you work with text files and/or file uploads when you've got very large variables.

greetz
up
2
edouard dot berge at gmail dot com
13 years ago
Warning!

When unset from an array, if you unset all elements, the array is always set

$tab=array('A'=>1,'B'=>2);
unset($tab['A']);
unset($tab['B']);
echo isset($tab)." ".count($tab);

output: 1 0
up
3
Hayley Watson
16 years ago
In regard to some confusion earlier in these notes about what causes unset() to trigger notices when unsetting variables that don't exist....

Unsetting variables that don't exist, as in
<?php
unset($undefinedVariable);
?>
does not trigger an "Undefined variable" notice. But
<?php
unset($undefinedArray[$undefinedKey]);
?>
triggers two notices, because this code is for unsetting an element of an array; neither $undefinedArray nor $undefinedKey are themselves being unset, they're merely being used to locate what should be unset. After all, if they did exist, you'd still expect them to both be around afterwards. You would NOT want your entire array to disappear just because you unset() one of its elements!
up
1
stacionari at gmail dot com
16 years ago
Sometimes you need to assigne values to an array index in some loop (if, while, foreach etc.) but you wish to set starting index key to some number greater then zero (lets say 5). One idea how to do this is:

<?php
    $values
= array(5, 10, 15, 100);  //array of values that we wish to add to our new array
   
   
$myArray = array(4=>0);   //sets starting key to be 4 and assigns some value (lets say 0)
   
unset($myArray[4]);   //delete this index key, but preserves further enumeration
   
   
foreach($values as $value){
       
$myArray[] = $value;   //asign values to our array
   
}
   
   
print_r($myArray);

/* Output:

Array ( [5] => 5 [6] => 10 [7] => 15 [8] => 100 )

*/

?>
up
-2
Andreas
13 years ago
You can not unset a numeric key of an array, if key is a string. See this example:

// Create a simple array with 3 different key types
$test[1] = array(
    10 => array('apples'),
    "20" => array('bananas'),
    '30' => array('peaches')
);
$test[2] = (array) json_decode(json_encode($test[1]));
$test[3] = (array) (object) $test[1];
// array form a stdClass object
$testClass = new stdClass();
$testClass->{10} =  array('apples');
$testClass->{"20"} =  array('bananas');
$test[4] = (array) $testClass[6];

echo "<pre>";
foreach($test as $testNum => $arr) {

    echo "\nTest: " . $testNum  . " \n";
    var_dump($arr);

    foreach($arr as $key => $fruit) {
        echo "key: " . $key . "\n";
        echo "key exists: ";
        var_dump(array_key_exists(strval($key), $arr));
        echo "typeof key is: " . gettype($key) . "\n";

        unset($arr[$key]);
    }
    var_dump($arr);
    echo "\n" . str_repeat("-", 80);
}
echo "</pre>";

And here is the output:

Test: 1
array(3) {
  [10]=>
  array(1) {
    [0]=>
    string(6) "apples"
  }
  [20]=>
  array(1) {
    [0]=>
    string(7) "bananas"
  }
  [30]=>
  array(1) {
    [0]=>
    string(7) "peaches"
  }
}
key: 10
key exists: bool(true)
typeof key is: integer
key: 20
key exists: bool(true)
typeof key is: integer
key: 30
key exists: bool(true)
typeof key is: integer
array(0) {
}

--------------------------------------------------------------
Test: 2
array(3) {
  ["10"]=>
  array(1) {
    [0]=>
    string(6) "apples"
  }
  ["20"]=>
  array(1) {
    [0]=>
    string(7) "bananas"
  }
  ["30"]=>
  array(1) {
    [0]=>
    string(7) "peaches"
  }
}
key: 10
key exists: bool(false)
typeof key is: string
key: 20
key exists: bool(false)
typeof key is: string
key: 30
key exists: bool(false)
typeof key is: string
array(3) {
  ["10"]=>
  array(1) {
    [0]=>
    string(6) "apples"
  }
  ["20"]=>
  array(1) {
    [0]=>
    string(7) "bananas"
  }
  ["30"]=>
  array(1) {
    [0]=>
    string(7) "peaches"
  }
}

--------------------------------------------------------------
Test: 3
array(3) {
  [10]=>
  array(1) {
    [0]=>
    string(6) "apples"
  }
  [20]=>
  array(1) {
    [0]=>
    string(7) "bananas"
  }
  [30]=>
  array(1) {
    [0]=>
    string(7) "peaches"
  }
}
key: 10
key exists: bool(true)
typeof key is: integer
key: 20
key exists: bool(true)
typeof key is: integer
key: 30
key exists: bool(true)
typeof key is: integer
array(0) {
}

--------------------------------------------------------------
Test: 4
array(2) {
  ["10"]=>
  array(1) {
    [0]=>
    string(6) "apples"
  }
  ["20"]=>
  array(1) {
    [0]=>
    string(7) "bananas"
  }
}
key: 10
key exists: bool(false)
typeof key is: string
key: 20
key exists: bool(false)
typeof key is: string
array(2) {
  ["10"]=>
  array(1) {
    [0]=>
    string(6) "apples"
  }
  ["20"]=>
  array(1) {
    [0]=>
    string(7) "bananas"
  }
}

--------------------------------------------------------------

Fix the problem with a rebuild of the array:
$oldArray = $array();
$array = array();
foreach($oldArray as $key => $item) {
    $array[intval($key)] = $item;
}
up
-1
macnimble at gmail dot com
14 years ago
Two ways of unsetting values within an array:

<?php
# remove by key:
function array_remove_key ()
{
 
$args  = func_get_args();
  return
array_diff_key($args[0],array_flip(array_slice($args,1)));
}
# remove by value:
function array_remove_value ()
{
 
$args = func_get_args();
  return
array_diff($args[0],array_slice($args,1));
}

$fruit_inventory = array(
 
'apples' => 52,
 
'bananas' => 78,
 
'peaches' => 'out of season',
 
'pears' => 'out of season',
 
'oranges' => 'no longer sold',
 
'carrots' => 15,
 
'beets' => 15,
);

echo
"<pre>Original Array:\n",
    
print_r($fruit_inventory,TRUE),
    
'</pre>';

# For example, beets and carrots are not fruits...
$fruit_inventory = array_remove_key($fruit_inventory,
                                   
"beets",
                                   
"carrots");
echo
"<pre>Array after key removal:\n",
    
print_r($fruit_inventory,TRUE),
    
'</pre>';

# Let's also remove 'out of season' and 'no longer sold' fruit...
$fruit_inventory = array_remove_value($fruit_inventory,
                                     
"out of season",
                                     
"no longer sold");
echo
"<pre>Array after value removal:\n",
    
print_r($fruit_inventory,TRUE),
    
'</pre>';
?>
up
-3
chad 0x40 herballure 0x2e com
16 years ago
It is observed on PHP 5.1.6 that <?php unset($this); ?> inside of a method will remove the reference to $this in that method. $this isn't considered "special" as far as unset() is concerned.
up
-11
tigercat at aol dot com
11 years ago
The combination of "global" and "unset" in functions can lead to some unexpected results.  This is because the "global" function creates a reference to a variable at the time it's executed, so a variable can be deleted out from under a "global $my_variable" declaration in a function.  Accessing data that's been deleted with an obsolete reference is usually a bad thing; in some languages it can generate a machine address fault.

<?php
$my_global_var
= "old data";
f1();

function
f1() // example of invalid variable reference use
{
  global
$my_global_var;   // creates reference to global variable
 
f2(); // recreates global variable, so reference is now invalid

// bad...
 
echo $my_global_var;     // outputs "old data" (from invalid memory???)

// good...
 
global $my_global_var// reestablish reference to new global variable
 
echo $my_global_var;     // outputs "new data" as expected
}

function
f2() // recreate global variable
{
  unset(
$GLOBALS['my_global_var']); // this syntax works with all variable types including arrays
 
global $my_global_var; // must do this after unset to access new global variable
 
$my_global_var = "new data";
}
?>
up
-9
muhamad_zakaria at yahoo dot com
18 years ago
We have experienced when we applied 'unset' to the overloaded properties (PHP5), consider the code below:
<?php
   
class TheObj {
        public
$RealVar1, $RealVar2, $RealVar3, $RealVar4;
        public
$Var = array();

        function
__set($var, $val) {
           
$this->Var[$var] = $val;
        }
        function
__get($var) {
            if(isset(
$this->Var[$var])) return $this->Var[$var];
            else return -
1;
        }
    }

   
$SomeObj = new TheObj;

   
// here we set for real variables
   
$SomeObj->RealVar1 = 'somevalue';
   
$SomeObj->{'RealVar2'} = 'othervalue';
   
$SomeObj->{'RealVar'.(3)} = 'othervaluetoo';
   
$SomeObj->{'RealVar'.'4'} = 'anothervalue';

   
// and here we set for virtual variables
   
$SomeObj->Virtual1 = 'somevalue';
   
$SomeObj->{'Virtual2'} = 'othervalue';
   
$SomeObj->{'Virtual'.(3)} = 'othervaluetoo';
   
$SomeObj->{'Virtual'.'4'} = 'anothervalue';

   
// now we will try to unset these variables
   
unset($SomeObj->RealVar1);
    unset(
$SomeObj->{'RealVar'.(3)});

   
//the lines below will catch by '__get' magic method since these variables are unavailable anymore
   
print $SomeObj->RealVar1."\n";
    print
$SomeObj->{'RealVar'.(3)}."\n";

   
// now we will try to unset these variables
   
unset($SomeObj->Virtual1);
    unset(
$SomeObj->{'Virtual'.(3)});

   
//but, these variables are still available??? eventhough they're "unset"-ed
   
print $SomeObj->Virtual1."\n";
    print
$SomeObj->{'Virtual'.(3)}."\n";
?>

Please note that PHP doesn't have magic callback to unset overloaded properties. This is the reason why unset($SomeObj->Virtual1) doesn't work.

But it does work when we set 'null' value such as the following code:
<?php
   
// now we will set 'null' value instead of using unset statement
   
$SomeObj->Virtual1 = null;
   
$SomeObj->{'Virtual'.(3)} = null;

   
// and now these variables are no longer available
   
print $SomeObj->Virtual1."\n";
    print
$SomeObj->{'Virtual'.(3)}."\n";
?>
Sound ugly, yeah?

This applied to the "virtual" array variable too, see more at http://bugs.php.net/bug.php?id=33513 (at feedback) about it.
PS: we used PHP version 5.1.0-dev from the CVS snapshot when we wrote the above codes.
up
-5
magnesium dot oxide dot play+php at gmail dot com
9 years ago
You can unset superglobals like $GLOBALS, $_GET etc., but causing an unususal behavior (as of PHP 5.3.3).

1) unsetting of superglobals is done globally, i.e. unsetting inside the function affects GLOBALLY.

2) Recreation of unset'ed superglobals can be done (recreated valiables are superglobals), but original functionality (in $GLOBALS, $_SESSION ...) has lost.

<?php

function foo(){
  unset(
$GLOBALS);
}

function
bar(){
 
var_dump($GLOBALS);
}

foo();
bar(); //issues E_NOTICE ($GLOBALS not defined)
$GLOBALS=3;
bar(); //displays int(3)

?>
up
-1
ronan at shopping-feed dot com
4 years ago
<?php

$list
= ['a', 'b', 'c'];
next($list);
unset(
$list[1]);

echo
current($list); // result : "c"
To Top