snmpget

(PHP 4, PHP 5, PHP 7, PHP 8)

snmpgetFetch an SNMP object

Descrição

snmpget(
    string $hostname,
    string $community,
    array|string $object_id,
    int $timeout = -1,
    int $retries = -1
): mixed

The snmpget() function is used to read the value of an SNMP object specified by the object_id.

Parâmetros

hostname

The SNMP agent.

community

The read community.

object_id

The SNMP object.

timeout

The number of microseconds until the first timeout.

retries

The number of times to retry if timeouts occur.

Valor Retornado

Returns SNMP object value on success or false on error.

Exemplos

Exemplo #1 Using snmpget()

<?php
$syscontact
= snmpget("127.0.0.1", "public", "system.SysContact.0");
?>

Veja Também

  • snmpset() - Set the value of an SNMP object

add a note add a note

User Contributed Notes 16 notes

up
1
Malaka Udawatta (malaka13 at gmail dot com)
16 years ago
When I try to get a 64 bit counter variable (e.g. ifHCInOctets) using snmpget function, following error message was appeared.

Error in packet: (noSuchName) There is no such variable name in this MIB

The solution for this is to use snmp2_get(); function. The prameters are same as snmpget();
up
2
Johann Glaser
20 years ago
It seems that for each snmpget() its own socket() will be opened. This is not closed after snmpget() finishes. Neither existing sockets are reused by subsequent snmpget() calls.

When querying a few switches with lots of ports the maximum file descriptor count of Apache is exhausted. Thus no more snmpget() are possible. Additionaly no more files can be read by this particular Apache process. Neither the PHP file, any include files nor any other files (like a .css file, ...).

This probably explains the observation of tkjode at phalnet dot com. Different to his case is that I'm using Linux.
up
1
maxie_ro at do dot not dot spam dot yahoo dot com
14 years ago
This function can be used to identify devices on a network, by getting their sysObjectID and sysDescr. On short, this is what I did:
<?php
   $sysid
= @snmpget($ip, 'public', '.1.3.6.1.2.1.1.2.0', 300);
   if(
$sysid) {
     
$sysdescr = @snmpget($ip, 'public', '.1.3.6.1.2.1.1.1.0', 300);
   }
?>

What I get for equipments, for example:
<?php
   $sysid
= 'OID: .iso.3.6.1.4.1.5003.8.1.1.57';// => AudioCodes MP114;
   //.iso.3.6.1.4.1. is a "prefix" for the OID domain
   //5003 is the IANA number for AudioCodes
   //8.1.1.57 identifies the equipment type (MP-114)
  
$sysdescr = '"Product: MP-114 FXS;SW Version: 5.00A.024"';
?>
Unfortunately, not all of them report correct objectID, for example they report only the vendor and stop there etc.

In case you are wondering why I used the code '.1.3.6.1.2.1.1.2.0' in the function call instead of "sysObjectID.0", it's because only numeric codes seem to work on Windows. For more codes, google "cisco SNMP Object Navigator".
Have fun.
up
1
Eduardo
16 years ago
The online documentation says that the function returns "FALSE" on error but, actually, it returns NULL on error.
up
0
d dot shereck at gmail dot com
15 years ago
For those wishing to use v2 or 3

you can consult the php_snmp.h header
here is the list of functions

PHP_FUNCTION(snmpget);
PHP_FUNCTION(snmpgetnext);
PHP_FUNCTION(snmpwalk);
PHP_FUNCTION(snmprealwalk);
PHP_FUNCTION(snmp_get_quick_print);
PHP_FUNCTION(snmp_set_quick_print);
PHP_FUNCTION(snmp_set_enum_print);
PHP_FUNCTION(snmp_set_oid_output_format);
PHP_FUNCTION(snmpset);

PHP_FUNCTION(snmp2_get);
PHP_FUNCTION(snmp2_getnext);
PHP_FUNCTION(snmp2_walk);
PHP_FUNCTION(snmp2_real_walk);
PHP_FUNCTION(snmp2_set);

PHP_FUNCTION(snmp3_get);
PHP_FUNCTION(snmp3_getnext);
PHP_FUNCTION(snmp3_walk);
PHP_FUNCTION(snmp3_real_walk);
PHP_FUNCTION(snmp3_set);

PHP_FUNCTION(snmp_set_valueretrieval);
PHP_FUNCTION(snmp_get_valueretrieval);
up
0
ac221 at sussex dot ac dot uk
16 years ago
Some SNMP agents return mac addresses as hex encoded ascii.

e.g. '30:30:3a:31:37:3a:66:32:3a:39:62:3a:34:36:3a:30:65'

Each octet represents 4 bits of the mac address.
Some vendors may also encode the separators into the string.

Heres a function to convert these strings back into plain hex.

<?php
$hexStr
= '30:30:3a:31:37:3a:66:32:3a:39:62:3a:34:36:3a:30:65';

echo(
str_replace(':','',hexStr2Ascii($hexStr)));

function
hexStr2Ascii($hexStr,$separator = ':'){
   
$hexStrArr = explode($separator,$hexStr);
   
$asciiOut = null;
    foreach(
$hexStrArr as $octet){
       
$asciiOut .= chr(hexdec($octet));
    }
    return
$asciiOut;
}
?>

Outputs: '0017f29b460e'
up
0
michael dot mauch at gmx dot de
17 years ago
I have no idea what the timeout value is, but 1 second is really really 1 000 000 000 nano seconds (cf. http://en.wikipedia.org/wiki/SI_prefix).
up
0
Jim
17 years ago
Unfortunately, It appears that you can not put multiple objects into the snmpget function, ie: sysUpTime.0 ifInOctets.1 ifOutOctets.1.  For what it's worth, the time argument is in nano-seconds as previously mentioned.  There is a lot of conflicting information out there about this.
up
0
dstjohn-NO-SPAM at mediacast1 dot com
18 years ago
2 year tidbit update :)

<?php
// author: dstjohn at mediacast1.com
// updated: 09-11-2005
// set some vars
$snmpcommunity = 'PUBLIC'; //snmp community name
$ips = 'test1.com,test2.com'; //ips or dns to get snmp data from
$system_number = '1';
//end da vars

//start da loop d loop
for ($i = 0; $i <= $system_number; $i++) {
$sysip = explode(",",$ips);

//get system name
$sysname[0] = snmpget($sysip[$i], $snmpcommunity, "sysName.0");
$sysname[1] = eregi_replace("STRING:","",$sysname[0]);
echo
'System Name: '.$sysname[1].'<br>';

//system description
$sysdesc[0] = snmpget($sysip[$i], $snmpcommunity, "sysDescr.0");
$sysdesc[1] = eregi_replace("STRING:","",$sysdesc[0]);
echo
'System Description: '.$sysdesc[1].'<br>';

//system location
$sysloc[0] = snmpget($sysip[$i], $snmpcommunity, "sysLocation.0");
$sysloc[1] = eregi_replace("STRING:","",$sysloc[0]);
echo
'System Location: '.$sysloc[1].'<br>';

//current tcp connections
$tcpcons[0] = snmpget($sysip[$i], $snmpcommunity, "tcpCurrEstab.0");
$tcpcons[1] = eregi_replace("Gauge32:","",$tcpcons[0]);
echo
'Open TCP/IP Connections: '.$tcpcons[1].'<br>';

//get system uptime
$sysuptime[0] = snmpget($sysip[$i], $snmpcommunity, "system.sysUpTime.0");
$sysuptime[1] = eregi_replace("Timeticks:","",$sysuptime[0]);
echo
'System Uptime: Timeticks -'.$sysuptime[1].'<br>';

//windows only
//installed memory
if(eregi('Windows',$sysdesc[1])){
$mem[0] = snmpget($sysip[$i], $snmpcommunity, "HOST-RESOURCES-MIB::hrMemorySize.0");
$mem[1] = eregi_replace("INTEGER:","",$mem[0]);
$mem[2] = eregi_replace("KBytes","",$mem[1]);
echo
'Insalled Memory: '.$mem[2].' KiloBytes<br>';
}

echo
'<br><br>';
}
//end loop

?>
up
0
javierb at gmx dot net
20 years ago
pooling a cisco.

$ip = '1.1.1.1';
$community ='publico';
$a = snmpget($ip,$community, "IF-MIB::ifLastChange.1")
$b = snmpget($ip,$community, "IF-MIB::ifAlias.1");
print("a = ".$a."\n"."b = ".$b."\n");

a = Timeticks: (929969969) 107 days, 15:14:59.69
b = Timeticks: (929969969) 107 days, 15:14:59.69

when the interface has not description.
up
0
tkjode at phalnet dot com
22 years ago
It has been observed on NT/2000 systems that flooding devices with SNMP requests will cause NT's SNMP service to stop working.

For example, I polled 183 switches on our network just fine.  I then attempted to simulate heavy traffic to that page by refreshing and breaking connections (as any real world system would have to go through).  SNMP stopped working throughout the entire machine, including non-PHP/Webserver processes.
up
0
grice at berbee dot com
23 years ago
It looks like you can use a non-standard port for SNMP
with something like this:

$foo = snmpwalk('foo.bar.com:1161', 'foofoo', '.1.3.6');

This is on PHP 3.16; I haven't managed to get PHP 4.02 to compile successfully on Solaris 2.6 yet.
--Michael
up
-1
brunoseys at telenet dot be
16 years ago
According the SNMPv2-MIB DEFINITIONS the right syntax should be "system.sysContact.0" and NOT "system.SysContact.0" as used in the above example 2251.

SNMPv2-MIB DEFINITIONS
...
sysContact OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The textual identification of the contact person for this
managed node, together with information on how to contact
this person. If no contact information is known, the
value
is the zero-length string."
::= { system 4 }
up
-1
tridman
17 years ago
The timeout is in micro seconds. Thus 1.000.000 means 1 Second.
up
-1
dstjohn-NO-SPAM at mediacast1 dot com
20 years ago
Little tidbit for snmpget function

<?php
//snmpget system stats
$host = 'localhost';
$community = 'public';

//get system name
$sysname = snmpget($host, $community, "system.sysName.0");

//get system uptime
$sysup = snmpget($host, $community, "system.sysUpTime.0");
$sysupre = eregi_replace("([0-9]{3})","",$sysup);
$sysupre2 = eregi_replace("Timeticks:","",$sysupre);
$sysupre3 = eregi_replace("[()]","",$sysupre2);

//get tcp connections
$tcpcon = snmpget($host, $community,"tcp.tcpCurrEstab.0");
$tcpconre = eregi_replace("Gauge32:","",$tcpcon);

echo
'
System Name: '
.$sysname.'<br>
System Uptime: '
.$sysupre3.'<br>
Current Tcp Connections: '
.$tcpconre.'<br>';

?>
up
-4
fbleau
17 years ago
The default value of Timeout is 1000000  nanoseconde (1 sec) and the retrie is 5 thsi value is set by Net-SNMP library.

#!/usr/local/bin/php
<?php
$time_start
= microtime(true);
$reponse = snmpget('10.5.1.1', 'public', "1.3.6.1.2.1.1.3.0",1000000,5);
$time_end = microtime(true);
$time = $time_end - $time_start;

echo
"Delay in $time secondes\n";
?>
To Top