pack

(PHP 4, PHP 5, PHP 7, PHP 8)

packEmpacota dados em uma string binária

Descrição

pack(string $format, mixed ...$values): string

Empacota os argumentos fornecidos em uma string binária de acordo com o formato especificado em format.

A ideia para esta função foi tirada do Perl e todos os códigos de formatação funcionam da mesma forma que no Perl. Entretando, há alguns códigos de formatação que não existem, como código "u" do Perl.

Observe que a distinção entre valores com e sem sinal somente afeta a função unpack(), enquanto que a função pack() fornece o mesmo resultado para códigos de formato com e sem sinal.

Parâmetros

format

A string format consistem em códigos de formado seguidos de um argumento repetidor opcional. O arrgumento repetidor pode ser um valor inteiro ou * para repetir até o final dos dados de entrada. Para a, A, h, H a contagem de repetição especifica quantos caractares de um argumento de dados são tomados, para @ é a posição absoluta onde colocar o próximo dado, para todo o restante a contagem de repetição especifica quantos argumentos de dados são consumidos e empacotados na string binária resultante.

Os formatos atualmente implementados são:

Caracteres de formato de pack()
Código Descrição
a String com bytes NUL à esquerda
A String com espaços à esquerda
h String hexadecimal, nibble menos significativo primeiro
H String hexadecimal, nibble mais significativo primeiro
csigned char
C unsigned char
s signed short (sempre 16 bits, ordem de bytes da máquina)
S unsigned short (sempre 16 bits, ordem de bytes da máquina)
n unsigned short (sempre 16 bits, ordem de bytes Big Endian)
v unsigned short (sempre 16 bits, ordem de bytes Little Endian)
i signed integer (tamanho e ordem de bytes dependentes da máquina)
I unsigned integer (tamanho e ordem de bytes dependentes da máquina)
l signed long (sempre 32 bits, ordem de bytes da máquina)
L unsigned long (sempre 32 bits, ordem de bytes da máquina)
N unsigned long (sempre 32 bits, ordem de bytes Big Endian)
V unsigned long (sempre 32 bits, ordem de bytes Little Endian)
q signed long long (sempre 64 bits, ordem de bytes da máquina)
Q unsigned long long (sempre 64 bits, ordem de bytes da máquina)
J unsigned long long (sempre 64 bits, ordem de bytes Big Endian)
P unsigned long long (sempre 64 bits, ordem de bytes Little Endian)
f float (representação e tamanho dependentes da máquina)
g float (tamanho dependente da máquina, ordem de bytes Little Endian)
G float (tamanho dependente da máquina, ordem de bytes Big Endian)
d double (representação e tamanho dependentes da máquina)
e double (tamanho dependente da máquina, ordem de bytes Little Endian)
E double (tamanho dependente da máquina, ordem de bytes Big Endian)
x byte NUL
X Volta um byte
Z String com bytes NUL à esquerda
@ Preenche com bytes NUL até a posição absoluta

values

Valor Retornado

Retorna uma string binária contendo dados.

Registro de Alterações

Versão Descrição
8.0.0 Esta função não mais retorna false em caso de falha.
7.2.0 Tipos float e double suportam tanto Big Endian quanto Little Endian.
7.0.15,7.1.1 Os códigos "e", "E", "g" e "G" foram adicionados para habilitar suporte a ordem de byte para float e double.

Exemplos

Exemplo #1 Exemplo de pack()

<?php
$binarydata
= pack("nvc*", 0x1234, 0x5678, 65, 66);
?>

A string binária resultante terá 6 bytes de comprimento e conterá a sequência de bytes 0x12, 0x34, 0x78, 0x56, 0x41, 0x42.

Notas

Cuidado

Observe que internamente o PHP armazena valores int como valores com sinal de tamanho dependente da máquina (o tipo long da linaguagem C). Literais inteiros e operações que resultam em números fora da faixa do tipo int serão armazenados como float. Ao empacotar estes floats como inteiros, eles primeiro são convertidos para o tipo inteiro. Isto pode ou não resultar no padrão de bytes desejado.

O caso mais relevante ocorre ao empacotar números sem sinal que poderiam ser representáveis pelo tipo int se eles fossem sem sinal. Em sistemas onde o tipo int tem 32 bits, a conversão normalmente resulta no mesmo padrão de byte como se o int fosse sem sinal (embora isso dependa das conversões de sem sinal para com sinal definidas pela implementação, conforme o padrão C). Em sistemas onte o tipo int tem 64 bits, o tipo float provavelmente não terá a mantissa grande o suficiente para representar o valor sem perda de precisão. Se estes sistemas também tiverem o tipo int nativo de 64 bits (a maioria dos sistemas tipo UNIX não têm), a única maneira de usar o formato I de empacotamento na faixa superior é criar valores negativos int com a mesma representação de bytes do valor sem sinal desejado.

Veja Também

  • unpack() - Desempacota dados de uma string binária

add a note add a note

User Contributed Notes 20 notes

up
75
chadm at codeangel dot org
12 years ago
If you'd like to understand pack/unpack. There is a tutorial here in perl, that works equally well in understanding it for php:

http://perldoc.perl.org/perlpacktut.html
up
35
stanislav dot eckert at vizson dot de
7 years ago
A helper class to convert integer to binary strings and vice versa. Useful for writing and reading integers to / from files or sockets.

<?php

   
class int_helper
   
{
        public static function
int8($i) {
            return
is_int($i) ? pack("c", $i) : unpack("c", $i)[1];
        }

        public static function
uInt8($i) {
            return
is_int($i) ? pack("C", $i) : unpack("C", $i)[1];
        }

        public static function
int16($i) {
            return
is_int($i) ? pack("s", $i) : unpack("s", $i)[1];
        }

        public static function
uInt16($i, $endianness=false) {
           
$f = is_int($i) ? "pack" : "unpack";

            if (
$endianness === true) {  // big-endian
               
$i = $f("n", $i);
            }
            else if (
$endianness === false) {  // little-endian
               
$i = $f("v", $i);
            }
            else if (
$endianness === null) {  // machine byte order
               
$i = $f("S", $i);
            }

            return
is_array($i) ? $i[1] : $i;
        }

        public static function
int32($i) {
            return
is_int($i) ? pack("l", $i) : unpack("l", $i)[1];
        }

        public static function
uInt32($i, $endianness=false) {
           
$f = is_int($i) ? "pack" : "unpack";

            if (
$endianness === true) {  // big-endian
               
$i = $f("N", $i);
            }
            else if (
$endianness === false) {  // little-endian
               
$i = $f("V", $i);
            }
            else if (
$endianness === null) {  // machine byte order
               
$i = $f("L", $i);
            }

            return
is_array($i) ? $i[1] : $i;
        }

        public static function
int64($i) {
            return
is_int($i) ? pack("q", $i) : unpack("q", $i)[1];
        }

        public static function
uInt64($i, $endianness=false) {
           
$f = is_int($i) ? "pack" : "unpack";

            if (
$endianness === true) {  // big-endian
               
$i = $f("J", $i);
            }
            else if (
$endianness === false) {  // little-endian
               
$i = $f("P", $i);
            }
            else if (
$endianness === null) {  // machine byte order
               
$i = $f("Q", $i);
            }

            return
is_array($i) ? $i[1] : $i;
        }
    }
?>

Usage example:
<?php
    Header
("Content-Type: text/plain");
    include(
"int_helper.php");

    echo
int_helper::uInt8(0x6b) . PHP_EOL// k
   
echo int_helper::uInt8(107) . PHP_EOL// k
   
echo int_helper::uInt8("\x6b") . PHP_EOL . PHP_EOL// 107

   
echo int_helper::uInt16(4101) . PHP_EOL// \x05\x10
   
echo int_helper::uInt16("\x05\x10") . PHP_EOL// 4101
   
echo int_helper::uInt16("\x05\x10", true) . PHP_EOL . PHP_EOL// 1296

   
echo int_helper::uInt32(2147483647) . PHP_EOL// \xff\xff\xff\x7f
   
echo int_helper::uInt32("\xff\xff\xff\x7f") . PHP_EOL . PHP_EOL// 2147483647

    // Note: Test this with 64-bit build of PHP
   
echo int_helper::uInt64(9223372036854775807) . PHP_EOL// \xff\xff\xff\xff\xff\xff\xff\x7f
   
echo int_helper::uInt64("\xff\xff\xff\xff\xff\xff\xff\x7f") . PHP_EOL . PHP_EOL// 9223372036854775807

?>
up
18
plutus at gmx dot de
23 years ago
Note that the the upper command in perl looks like this:

$binarydata = pack ("n v c*", 0x1234, 0x5678, 65, 66);
In PHP it seems that no whitespaces are allowed in the first parameter. So if you want to convert your pack command from perl -> PHP, don't forget to remove the whitespaces!
up
13
FrozenFire
13 years ago
If you need to unpack a signed short from big-endian or little-endian specifically, instead of machine-byte-order, you need only unpack it as the unsigned form, and then if the result is >= 2^15, subtract 2^16 from it.

And example would be:

<?php
$foo
= unpack("n", $signedbigendianshort);
$foo = $foo[1];
if(
$foo >= pow(2, 15)) $foo -= pow(2, 16);
?>
up
6
j.s.hoekstra
18 years ago
/* Convert float from HostOrder to Network Order */
function FToN( $val )
{
    $a = unpack("I",pack( "f",$val ));
    return pack("N",$a[1] );
}
   
/* Convert float from Network Order to HostOrder */
function NToF($val )
{
    $a = unpack("N",$val);
    $b = unpack("f",pack( "I",$a[1]));
    return $b[1];
}
up
8
Anonymous
14 years ago
Coder's example is basically an explanation of bindec() and decbin(), not pack() and unpack().

Here's some code to convert a string binary expression into its binary-string equivalent and vice versa.

(Would be even simpler if pack/unpack offered a 'b' format code....)

<?php
function bin2bstr($input)
// Convert a binary expression (e.g., "100111") into a binary-string
{
  if (!
is_string($input)) return null; // Sanity check

  // Pack into a string
 
return pack('H*', base_convert($input, 2, 16));
}

function
bstr2bin($input)
// Binary representation of a binary-string
{
  if (!
is_string($input)) return null; // Sanity check

  // Unpack as a hexadecimal string
 
$value = unpack('H*', $input);
 
 
// Output binary representation
 
return base_convert($value[1], 16, 2);
}

// Returns string(3) "ABC"
var_dump(bin2bstr('01000001 01000010 01000011'));

// Returns string(24) "010000010100001001000011"
var_dump(bstr2bin('ABC'));
?>
up
4
php at nagler-ihlein dot de
15 years ago
Be aware of format code H always padding the 0 for byte-alignment to the right (for odd count of nibbles).

So pack("H", "7") results in 0x70 (ASCII character 'p') and not in 0x07 (BELL character)
as well as pack("H*", "347") results in 0x34 ('4') and 0x70 ('p') and not 0x03 and 0x47.
up
4
zilinex at yahoo dot com
19 years ago
a cool function to converrt numbers to Persian numbers(utf-8)
origin: http://www.farsiweb.info/jalali/jalali.phps

function farsinum($str)
{
  $ret = "";
  for ($i = 0; $i < strlen($str); ++$i) {
        $c = $str[$i];
        if( $c >= '0' && $c <= '9' )
                $out .= pack("C*", 0xDB, 0xB0 + $c);
        else
                $ret .= $c;
  }
  return $ret;
}
up
3
Quis AT spam.to.my.devnull.quis.cx
16 years ago
<?PHP
function ntohs($port) {
 
$b=pack("N", $port);
  return
substr($b,2,2);
}
?>

I've spent a number of hours (n>=2) finding how to do this,
it works like the c function 'ntohs', used for eg the socks5 proxy protocol.
up
3
petepostma at gmail dot spam dot com
11 years ago
Even though in a 64-bit architecure intval(6123456789) = 6123456789, and sprintf('%b', 5000000000) = 100101010000001011111001000000000
pack will not treat anything passed to it as 64-bit.  If you want to pack a 64-bit integer:

<?php
$big
= 5000000000;

$left = 0xffffffff00000000;
$right = 0x00000000ffffffff;

$l = ($big & $left) >>32;
$r = $big & $right;

$good = pack('NN', $l, $r);

$urlsafe = str_replace(array('+','/'), array('-','_'), base64_encode($good));

//done!

//rebuild:
$unurl str_replace(array('-','_'), array('+','/'), $urlsafe);
$binary = base64_decode($unurl);

$set = unpack('N2', $tmp);
print_r($set);

$original = $set[1] << 32 | $set[2];
echo
$original, "\\r\\n";
?>

results in:
Array
(
    [1] => 1
    [2] => 705032704
)
5000000000

but ONLY on a 64-bit enabled machine and PHP distro.
up
2
Patrik Fimml
18 years ago
You will get the same effect with

<?php
function _readInt($fp)
{
   return
unpack('V', fread($fp, 4));
}
?>

or unpack('N', ...) for big-endianness.
up
1
dylan at pow7 dot com
16 years ago
This is how I used pack to convert base2 to base64 since base_convert doesn't support base64
The base conversions don't work for long strings, which is why I convert 1 byte at a time
Hope this helps someone

function base2to64($base2) {
    if ($remainbits = strlen($base2)%8) $base2 .= str_repeat('0',8-$remainbits);
    $base64 = NULL;
    for ($i=0;$i<strlen($base2);$i+=8) $base16 .= sprintf('%02x',bindec(sprintf('%08d',substr($base2,$i,8))));
    return base64_encode(pack('H*',$base16));
}
function base64to2($base64) {
    list($base16) = unpack('H*0',base64_decode($base64));
    $base2 = NULL;
    for ($i=0;$i<strlen($base16);$i++) $base2 .= sprintf('%04d',base_convert(substr($base16,$i,1),16,2));
    return $base2;
}
up
1
ru
6 years ago
pack()
h    Hex string, low nibble first (not same hex2bin())
H    Hex string, high nibble first (same hex2bin())
up
1
Coder
14 years ago
These two functions allow conversion between binary string and signed integer with possibility to give the bit length.

Usage:
<?php
echo si2bin(-10, 32);
11111111111111111111111111110110
echo si2bin(10, 32);
00000000000000000000000000001010
echo bin2si("11111111111111111111111111110110", 32);
-
10
echo bin2si("00000000000000000000000000001010", 32);
10

// signed integer to binary
function si2bin($si, $bits=32)
{
    if (
$si >= -pow(2,$bits-1) and $si <= pow(2,$bits-1) )
    {
        if (
$si >= 0) // positive or zero
       
{
           
$bin = base_convert($si,10,2);
           
// pad to $bits bit
           
$bin_length = strlen($bin);
            if (
$bin_length < $bits) $bin = str_repeat ( "0", $bits-$bin_length).$bin;
        }
        else
// negative
       
{
           
$si = -$si-pow(2,$bits);
           
$bin = base_convert($si,10,2);
           
$bin_length = strlen($bin);
            if (
$bin_length > $bits) $bin = str_repeat ( "1", $bits-$bin_length).$bin;
        }
        return
$bin;
    }
}

// binary to signed integer
function bin2si($bin,$bits=32)
{
    if (
strlen($bin)==$bits)
    {
        if (
substr($bin,0,1) == 0) // positive or zero
       
{
           
$si = base_convert($bin,2,10);
        }
        else
// negative
       
{
           
$si = base_convert($bin,2,10);
           
$si = -(pow(2,$bits)-$si);
        }
        return
$si;
    }
}
?>
up
1
Ammar Hameed
13 years ago
Using pack to write Arabic char(s) to a file.

<?php
$text
= "&#13574;&#13830;&#13830;";

$text = mb_convert_encoding($text, "UCS-2BE", "HTML-ENTITIES");

$len mb_strlen($text);

$bom = mb_convert_encoding("&#65534;", "unicode", "HTML-ENTITIES");

$fp = fopen('text.txt', 'w');

fwrite($fp, pack('a2', $bom)); 
fwrite($fp, pack("a{$len}", $text));
fwrite($fp, pack('a2', $bom));
fwrite($fp, pack('a2', "\n"));

fclose($fp);
?>
up
-2
Gerjoo at gmail dot com
12 years ago
You can use pack to strip the byte order mark (BOM) from a file.

For example, strip the UTF-8 BOM:

<?php

// Strips the UTF-8 mark: (hex value: EF BB BF)
function trimUTF8BOM($data){
    if(
substr($data, 0, 3) == pack('CCC', 239, 187, 191)) {
        return
substr($data, 3);
    }
    return
$data;
}

?>

This function could be easily adjusted to match any byte order mark. Have a look at wikipedia for a full list of hex codes for each specific encoding.

- Gerard
up
-1
SixThreeOh
14 years ago
If you're bugged by http://bugs.php.net/bug.php?id=5889 then you can try this:

Use igbinary-serialize if you don't mind a little overhead.

Or intarray (by the same person) if you don't mind using a slightly experimental package which may have problems sharing data between differently byte/bit ordered architectures.

I don't believe it would be too difficult to shove a serialize function and unserialize function in there if you rip out the code from igbinary for storing numeric arrays with the correct endianess. Looking at `igbinary_serialize32` and `igbinary_unserialize32` in igbinary.c it should be very easy to copy that functionality to intarray.c.

Take away the "<<0" though, that's just stupid :P

Ref: http://opensource.dynamoid.com/
up
-1
Newdawn.dk
17 years ago
When trying to create a ZIP file using the pack function - I experienced trouble with the "a" code - It converted all chars correct from the std. ASCII charset but not more language specific like ÆøÅ.
It seems that ZIP files do not use the same HEX for these as everything else does.
The fix was a quick workaround but you'll probably get the picture:
function UniHex($str) {
    // æ ø å Æ Ø Å
    //These are simply one HEX code being replaced by another to correct the issue
    $except = array("E6"=>"91","F8"=>"9B","E5"=>"86","C6"=>"92","D8"=>"9D",    "C5"=>"8F");
    for($i = 0; $i < strlen($str); $i++) {
        $hex = bin2hex(substr($str, $i, 1));
        if ($except[strtoupper($hex)])
            $hex = $except[strtoupper($hex)];
        $return .= $hex;
    }
    return $return;
}
And then i replaced an "a100" code with "H".strlen(uniHex($mystring))

This is like i said a quick workaround, but if you find the real reason for this i'd be happy to see it
up
-4
jrm456 at speed dot 1s dot fr
10 years ago
How to convert an integer to raw data, specifying the amount of bytes to convert to (will be padded with 0's):

    public function toRaw($int, $bytes = 4)
    {
        $hex = dechex($int);
       
        if (strlen($hex) % 2 != 0)
            $hex = '0'. $hex;

        $arr = str_split($hex, 2);

        while (count($arr) < $bytes)
            array_unshift($arr, 0);
       
        $arr = array_map('hexdec', $arr);
        $arr = array_map('chr', $arr);

        return join('', array_reverse($arr));
    }
up
-9
Anonymous
15 years ago
Array pack:
<?php
function pack_array($v,$a) {
return
call_user_func_array(pack,array_merge(array($v),(array)$a));
}
?>
To Top