ini_get_all
This version of return_bytes takes care of the MB, GB, KB cases along with the M,G,K ones.
Hope this is helpful!
<?php
public static function return_bytes ($val)
{
if(empty($val))return 0;
$val = trim($val);
preg_match('#([0-9]+)[\s]*([a-z]+)#i', $val, $matches);
$last = '';
if(isset($matches[2])){
$last = $matches[2];
}
if(isset($matches[1])){
$val = (int) $matches[1];
}
switch (strtolower($last))
{
case 'g':
case 'gb':
$val *= 1024;
case 'm':
case 'mb':
$val *= 1024;
case 'k':
case 'kb':
$val *= 1024;
}
return (int) $val;
}
?>
ini_get
(PHP 4, PHP 5)
ini_get — Obtém o valor de uma opção de configuração
Descrição
string ini_get
( string
$varname
)Retorna o valor da opção em caso de sucesso. Em caso de falha, como tentar obter um valor que não exista, irá retornar uma string vazia.
Nota: Quando obtendo valores booleanos
Um valor booleano off será retornado como uma string vazia enquanto um valor booleano on será retornado como "1".
Nota: Quando obtendo valores de tamanho de memória
Vários valores de definição de tamanho de memória, como upload_max_filesize são guardados no arquivo php.ini em uma anotação curta. ini_get() irá retornar exatamente a string guardada no arquivo php.ini, NÃO o seu valor inteiro equivalente. Tentar funções matemáticas comuns com estes valores não trará o resultado esperado.
<?php
/*
Seu php.ini contém as seguintes definições:
display_errors = On
register_globals = Off
post_max_size = 8M
*/
echo 'display_errors = ' . ini_get('display_errors') . "\n";
echo 'register_globals = ' . ini_get('register_globals') . "\n";
echo 'post_max_size = ' . ini_get('post_max_size') . "\n";
echo 'post_max_size+1 = ' . (ini_get('post_max_size')+1) . "\n";
?>Este script irá produzir:
display_errors = 1 register_globals = 0 post_max_size = 8M post_max_size+1 = 9 */ ?>
Veja também get_cfg_var(), ini_get_all(), ini_restore() e ini_set().
add a note
User Contributed Notes
ini_get - [11 notes]
Ivo Mandalski ¶
1 year ago
Stas Trefilov, OpteamIS ¶
3 years ago
another version of return_bytes which returns faster and does not use multiple multiplications (sorry:). even if it is resolved at compile time it is not a good practice;
no local variables are allocated;
the trim() is omitted (php already trimmed values when reading php.ini file);
strtolower() is replaced by second case which wins us one more function call for the price of doubling the number of cases to process (may slower the worst-case scenario when ariving to default: takes six comparisons instead of three comparisons and a function call);
cases are ordered by most frequent goes first (uppercase M-values being the default sizes);
specs say we must handle integer sizes so float values are converted to integers and 0.8G becomes 0;
'Gb', 'Mb', 'Kb' shorthand byte options are not implemented since are not in specs, see
http://www.php.net/manual/en/faq.using.php#faq.using.shorthandbytes
<?php
function return_bytes ($size_str)
{
switch (substr ($size_str, -1))
{
case 'M': case 'm': return (int)$size_str * 1048576;
case 'K': case 'k': return (int)$size_str * 1024;
case 'G': case 'g': return (int)$size_str * 1073741824;
default: return $size_str;
}
}
?>
filh at filh dot org ¶
7 years ago
Concerning the value retourned, it depends on how you set it.
I had the problem with horde-3 which test the safe_mode value.
THan :
- if you set the value with php_admin_value safe_mode Off (or On) ini_get returns the string
- if you set the value with php_admin_flag safe_mode Off (or On) ini_get returns the boolean.
nicolas dot grekas+php at gmail dot com ¶
3 years ago
Here is how to accurately test for boolean php.ini values:
<?php
function ini_get_bool($a)
{
$b = ini_get($a);
switch (strtolower($b))
{
case 'on':
case 'yes':
case 'true':
return 'assert.active' !== $a;
case 'stdout':
case 'stderr':
return 'display_errors' === $a;
default:
return (bool) (int) $b;
}
}
?>
Anonymous ¶
7 years ago
Important: The manual says that ini_get will return 0 or an empty string for boolean config values that are set to off in php.ini.
This is technically correct, however when you use
php_value register_globals off
in an .htaccess file, ini_get will return the string, which will "evaluate" to 1. So if you are using mod_php you have to check boolean config values against the strings (upper/lowercase etc.) anyhow or you will get wrong results.
peter ¶
4 years ago
The above example function called return_bytes() assumes that ini_get('upload_max_filesize') delivers only one letter at the end. As I've seen 'Mb' and things like that, I'd suggest to change the $last = ... part into $last = strtolower(substr($val,strlen($val/1),1)).
I'd call it $unit then.
david dot tulloh at infaze dot com dot au ¶
7 years ago
You can set custom entries in the ini file to provide globals such as database details.
However these must be retrieved with get_cfg_var, ini_get won't work.
Nathaniel Sabanski ¶
4 years ago
Here's a simplified version of return_bytes() that does not rely on non-breaking cases and variable variables.
<?php
function return_bytes($val)
{
$val = trim($val);
$last = strtolower(substr($val, -1));
if($last == 'g')
$val = $val*1024*1024*1024;
if($last == 'm')
$val = $val*1024*1024;
if($last == 'k')
$val = $val*1024;
return $val;
}
?>
Der Graph ¶
8 years ago
It might be useful for included scripts that include other files to extend the 'include_path' variable:
<?php ini_set('include_path',ini_get('include_path').':../includes:'); ?>
Sometimes, it may also be useful to store the current 'include_path' in a variable, overwrite it, include, and then restore the old 'include_path'.
fbeyer at <nospam>clickhand dot de ¶
10 years ago
If you want to test ini flags (eg. On/Off), I recommend to explicitly cast the value returned by ini_get() to boolean - it is cleaner as you only get true or false, not 0 or 1 or "" as described above.
<?php
$register_globals = (bool) ini_get('register_gobals');
?>
C fans may of course also cast it to (int) to play with 0 and 1 - that's also cleaner to print().
Dmitry Vinogradov ¶
9 months ago
Here's more comprehensive function returning number of bytes from strings like max_post_size or upload_max_filesize. It handles both 'k'/'kb', 'm'/'mb', and 'g'/'gb' at the end of the string, and is case insensitive.
<?php
function return_bytes($val)
{
$val = trim($val);
switch (strtolower(substr($val, -1)))
{
case 'm': $val = (int)substr($val, 0, -1) * 1048576; break;
case 'k': $val = (int)substr($val, 0, -1) * 1024; break;
case 'g': $val = (int)substr($val, 0, -1) * 1073741824; break;
case 'b':
switch (strtolower(substr($val, -2, 1)))
{
case 'm': $val = (int)substr($val, 0, -2) * 1048576; break;
case 'k': $val = (int)substr($val, 0, -2) * 1024; break;
case 'g': $val = (int)substr($val, 0, -2) * 1073741824; break;
default : break;
} break;
default: break;
}
return $val;
}
?>