Sybase 함수 목록

Table of Contents

add a note add a note

User Contributed Notes 25 notes

up
1
tcurdt at dff dot st
24 years ago
Poor documentation on sybase support!! Here's how I made it work... First get the linux ASE from sybase (maybe the ctlibs provided at php.net will do fine, too) Install the ASE rpm. (some distributions don't have system libs etc in the rpm database so you might get some dependency errors. If your systems fits the requirements install with "ignore dependencies") Recompile php with option --with-sybase-ct=/dirtoyoursybasehome. Then you need to set the env variable for (at least)your apache user by export SYBASE=/dirtoyoursybasehome. Now you need to set up your servers (like DSNs for ODBC). Edit the file $SYBASE/interfaces and add your server entries:

SERVERNAME
  query tcp ether 172.16.1.4 4100
  master tcp ether 172.16.1.4 4100

(change IP/FQHN and port to your setup) Now you can check your config by using
$SYBASE/bin/isql -S SERVERNAME -U DBUSER -P PASSWD
If you get a prompt you have connected to your sybase! Hurray! Now you can try with php
$db=sybase_connect("SERVERNAME","DBUSER","DBPASSWD");
And... Voila!
up
0
tgburrin
13 years ago
For ASE 15 you can run $SYBASE/$SYBASE_OCS/scripts/lnsyblibs to create symlinks for the older library names.  Using this instead of cp will presumably not break your installation should you apply something like an EBF.
up
0
zeldorblat at gmail dot com
18 years ago
In response to the post by jon dot bertsch at ucop dot edu, it is possible to install both the FreeTDS libraries and the Sybase libraries.  The problem is that the Sybase extension alias's its function names to the mssql_ functions.

Take a look in your PHP source directory under /ext/sybase_ct/php_sybase_ct.c near the top where the sybase_functions[] declaration is.  You can comment out the part that alias's the function names, recompile with FreeTDS and Sybase, and you're all set!
up
0
jon dot bertsch at ucop dot edu
18 years ago
Up to php 5.0.4 you cannot install both sybase and mssql (they use the same function names). It turns out though that if you use the Freetds library you can connect to sybase using the mssql functions (and visa versa I assume). Setup your servers in the freetds.conf file (for sybase use specify version 5.0, for mssql 7 or 8.0) and call the database connection as you would with mssql (mssql_conect). You should be able to connect either sql server or sybase. I don't know if all sybase functions will work as expected but basic querying is succesful. Hope this helps someone.
up
0
punkarruso at despammed dot com
19 years ago
I just want to report that, like explained in bug #27562, selective stored procedures (like sp_helpdb) don't return a resultset with freeTDS >= 0.62. (using php <= 4.3.9)
If you have installed such releases of freeTDS, downgrade to 0.61.x.
up
0
matt dot sawyer at gmail dot com
19 years ago
I've noticed (after days of frustration) that setting the sybase.interface_file to a location other than the default ($SYBASE/interfaces) in php.ini doesn't always work.  I finally gave up and copied my interface entries to the default location, and it works consistently now.  (This is even with sybase.interface_file still set to the non-default location).
up
0
info(at)sovall(dot)cz
19 years ago
This is way to compile Sybase ASE 12.5 with PHP5.0.0 and Apache 2 on Linux:
- install apache
- install ase1252_de_linux.tgz to /opt/sybase-12.5
- shell:# ln -s /opt/sybase-12.5 /opt/sybase
- edit phpsrc/configure and remove all '-linsck'
- edit phpsrc/ext/sybase-ct/php_sybase_ct.h and change CTLIB_VERSION CS_VERSION_100 to 125
- shell:# export SYBASE=/opt/sybase
- phpsrc/configure --with-sybase-ct=/opt/sybase/OCS-12_5
- phpsrc/make and make install
- edit apache2/conf/httpd.conf and add AddType... .php
- create /opt/sybase/interfaces file
SERVERNAME
[tab!]master tcp ether ipAddress port
[tab!]query tcp ether ipAddress port
- apache2/bin/apachectl start

I hope, that I save your time.
up
0
1rsv_sign_mail.ru (stas_aka_rsv)
20 years ago
There is a way how to force php work with both php_mssql.dll and php_sybase_ct.dll. Just open php_sybase_ct.dll in any editor (dont use MS WORD :0) ) and replace all "mssql_" on something like that "masql_".
After that there will not be warnings about double function definitions and php can use php_sybase_ct.dll to access to sybase and php_mssql.dll to access to mssql.
The reason why I did such thing is that I couldnt connect to mssql using php_sybase_ct.dll.
up
0
ms at klmoberg dot no
20 years ago
I solved my connection problems by setting ENV variables directly in PHP.

putenv ("SYBASE=/opt/sybase");
putenv ("SYBPLATFORM=linux");
putenv ("LD_LIBRARY_PATH=/opt/sybase/lib");
putenv ("LC_ALL=default");
putenv ("PATH=\"/opt/sybase/bin:$PATH\"");
putenv ("DSQUERY=SYBASE");

--
Martin Sarajervi
up
0
ddc at portalframework dot com
21 years ago
If you would like to use the wide table support of Sybase ASE 12.5, take advantage of XML/XQL embedded in the database and use varchars of more than 255 char, you'll need to recompile PHP changing this line in the
    php_sybase_ct.h file:

From:

#define CTLIB_VERSION CS_VERSION_100

To:

#define CTLIB_VERSION CS_VERSION_125

This will only run if you have installed Sybase ASE Open Client v. 12.5 and configured PHP telling it where the OCS is... (./configure --with-sybase-ct=$SYBASE_HOME/OCS [...])

--
Diego Dal Cero.
up
0
aj at bootsector dot org
21 years ago
A note for all who may be struggling...  Microsoft did away with the ct-lib support in SQL Server 2000.

I played with it and found a couple of articles related to it on google.  A workaround/different method would be preferrable.  Anybody?
up
0
ddc at portalframework.com
21 years ago
Compiling PHP with Sybase ASE 12.5 on Linux.

Assuming that you have installed the Sybase ASE 12.5 client in linux, and you have the SYBASE env variable set, you can compile PHP >= 4.0.6 with Sybase ASE 12.5.
Just use:

  --with-sybase-ct=$SYBASE/OCS
instead of
  --with-sybase-ct=$SYBASE
up
0
elee at kinwai dot net
21 years ago
Freetds 5.2 bugs!!

For those who use Freetds 5.2 running under linux connect to sqlserver2000, there is a bugs in selecting NVARCHAR field that data will either duplicated or truncated. To avoid this problem, please use CAST or CONVERT function in sql statement such as:
$query="select CAST(fieldname as nchar(1000)) as fieldname from table"

Feel free to contact us at
aikok@netfront.net
or
elee@kinwai.net

German Chu & Eagle Lee
up
0
basilio_mail at chat dot ru
22 years ago
For those, who might want to use SyBase client not only under Linux, you may try to use open-source FreeTDS library - http://www.freetds.org

Also there's how-to for FreeTDS and PHP:
http://www.freetds.org/userguide/php.html
up
0
rbuico at ntep dot nec dot co dot jp
22 years ago
maybe it can help.
my database is ASE

this is my script....

<?
$cnn = sybase_connect("db_server","sa","password");
$result = sybase_query("Select itemno,stockno from your_db..your_table");
$i = 0;
while ($r = sybase_fetch_array($result)) {
$i++;
$itemno = $r["itemno"];
$stockno = $r["stockno"];
echo "$i    $stockno   $itemno <br>";
}
?>

note that I did not use the
sybase_select_db("db") function because ASE had a default database.
thx...
up
0
borreo at softhome dot net
22 years ago
It's important to note that sybase_ct connect or pconnect were causing GPF.
If you experienced this problem, just update PHP to 4.0.6.
up
0
koos at kzdoos dot xs4all dot nl
23 years ago
A bit more about blobs:
If you want to retrieve blobs without them getting truncated, do a 'set textsize value' query first.
up
0
chptma at hydra dot esfm dot ipn dot mx
23 years ago
about sybase-ct library

You can download the file from php.net but the samples in the tar (and php) maybe not compile I have this problem in some systems (but not in others with old librarys and old gcc).

Try freetds from www.freetds.org that is ok!

System wthout trouble
Debian 2.1 gcc (2.7.2.3) libc-2.0.7.so
System With trouble
Debian 2.2 gcc (2.95.2) libc-2.1.3.so
RedHat 6.2 gcc [egcs] (2.91.66) libc-2.1.3.so

Please refer to mssql if you try to connect to MS SQL Server!!!
up
0
hoadley at xoom dot com
23 years ago
I would STRONGLY recommend using the ct library over the db library when compiling sybase support with php4+. I ran into strange http child seg faults when trying to issue multiple sql statements in one php page.  Using ct-library there is no problem.
up
0
james at lasolas dot com
24 years ago
If you get a segfault with sybase-ct, add a en_US entry to your  $SYBASE/locales/locales.dat file:

[linux]
    locale = en_US, us_english, iso_1
    ...
up
0
ericnewman at aol dot com
24 years ago
I struggled to get this to work for a week. Here's a tip. Log on to your system using the same login as your web server, probably "nobody". Using this account, make sure you can get isql to work. In my case, I had to change the permissions on the /opt/sybase folder, as well as chmod the /opt/sybase/interfaces file to 644. (It was 600 by default, and did not allow anyone but root to read it.) Once I did this, things started to happen...
up
0
Xtof at fromages-et-desserts dot com
24 years ago
To store an image file into Sybase try this :

$data = bin2hex(fread(fopen($image,"r"), filesize($image)));
//don't forget the 0x before the hex data.
if(! sybase_query("INSERT INTO test_image (image) VALUES (0x".$data.")")) die ("Unable to store the image.");

To retrieve it just do a select and use a hex2bin function (this one has been submitted by carl@five-ten-sg.com and is the fastest) :

function hex2bin($data) {
     $len = strlen($data);
      return pack("H" . $len, $data);
}

PS : use CT-lib rather than DB-lib (Sybase doesn't work on it anymore!)
up
-1
jeffersonmfs at hotmail dot com
16 years ago
PHP and Sybase 15

# cat /opt/sybase/SYBASE.sh >> /etc/profile
# exit
  
Make new logon

# vi /var/build/php-5.2.3/ext/sybase_ct/php_sybase_ct.h

change this line ...
#define CTLIB_VERSION CS_VERSION_100
...to...
#define CTLIB_VERSION CS_VERSION_150

# ln -sd /opt/sybase /home/sybase

# cp /opt/sybase/OCS-15_0/lib/libsybcomn.a     /opt/sybase/OCS-15_0/lib/libcomn.a
      
# cp /opt/sybase/OCS-15_0/lib/libsybcs.a     /opt/sybase/OCS-15_0/lib/libs.a

# cp /opt/sybase/OCS-15_0/lib/libsybct.a     /opt/sybase/OCS-15_0/lib/libct.a

# cp /opt/sybase/OCS-15_0/lib/libsybintl.a     /opt/sybase/OCS-15_0/lib/libintl.a

The new  file  /etc/ld.so.conf.d/sybase it must have the line

            /opt/sybase/OCS-15_0/lib

# ldconfig

            BUILD PHP

# ./configure --with-apxs2=/usr/sbin/apxs --with-config-file-path=/etc/ --with-sybase-ct=/opt/sybase/OCS-15_0

# make

# make install
       
# cp php.ini-dist  /etc/php.ini

Change display_erros=On to display_erros=Off

Edit Apache's httpd.conf file to associate .php files with a MIME type:

#
# PHP script support
#
AddType application/x-httpd-php .php
up
-2
sean dot healey at bayernlb dot co dot uk
18 years ago
I've finally got PHP 5.0.5 running under Apache2 on Solaris 8 ... connecting to Sybase ASE servers 12.0 and 12.5 using CT-LIB 12.5.

The following was my build procedure -

Build Apache:

./configure \
  --prefix=/usr/local/apache2 \
  --enable-so

make
make install

Edit httpd.conf, adjusting directives to suit the local environment.

Following advice given above, update the Sybase version string in the PHP sybase_ct module header file:

vi /var/build/php-5.0.5/ext/sybase_ct/php_sybase_ct.h

change this line ...
#define CTLIB_VERSION CS_VERSION_100
...to...
#define CTLIB_VERSION CS_VERSION_125

Build PHP:

SYBASE=/..../..../sybase12_5  <<-- path to your Sybase distribution root
SYBASE_OCS=OCS-12_5
LD_LIBRARY_PATH=$SYBASE/$SYBASE_OCS/lib

export SYBASE SYBASE_OCS PATH LD_LIBRARY_PATH

./configure \
  --prefix=/usr/local/php \
  --with-sybase-ct=$SYBASE/$SYBASE_OCS \
  --enable-static=sybase-ct \
  --with-apxs2=/usr/local/apache2/bin/apxs \
  --enable-sysvmsg \
  --enable-sysvsem \
  --enable-sysvshm

make
make test

NOTE: 'make test' will almost certainly fail all of the Sybase functionality, unless you update the test include file to use valid connectivity details for your local server:

vi /var/build/php-5.0.5/ext/sybase_ct/tests/test.inc

  // Change if needed
  define('HOST',     '****');
  define('USER',     '****');
  define('PASSWORD', '****');

make install

Edit Apache's httpd.conf file to associate .php files with a MIME type:

  #
  # PHP script support
  #
  AddType application/x-httpd-php .php .phtml
  AddType application/x-httpd-php-source .phps

Edit the apachectl script, inserting the following variable declarations after environment variables are imported:

  SYBASE=/..../..../sybase12_5
  SYBASE_OCS=OCS-12_5
  LD_LIBRARY_PATH=$SYBASE/$SYBASE_OCS/lib:$LD_LIBRARY_PATH
  export SYBASE SYBASE_OCS LD_LIBRARY_PATH

Ensure you have an 'interfaces' file in the root of your sybase distribution (Above the OCS-12_5 subdirectory), containing a server entry in the following format for each server you want to connect to:

  dataservername_ds
   <tab> master tcp ether <hostname> <port>
   <tab> query tcp ether <hostname> <port>

(if this is your dataserver machine, there will be at least 1 entry already for the local dataserver. It is advisable to install all of the above on a separate machine though, with its own copy of the sybase client)

Cross fingers, and:

apachectl start

If you get 'relocation' errors when starting Apache with the php module configured to load, check the output of 'ldd libphp5.so'. Each of the Sybase libraries should link to files under your Sybase client distribution:

ldd /usr/local/apache2/modules/libphp5.so
    libtcl.so =>     /.../sybase12_5/OCS-12_5/lib/libtcl.so
    libintl.so.1 => /.../sybase12_5/OCS-12_5/lib/libintl.so.1
    libcomn.so => /.../sybase12_5/OCS-12_5/lib/libcomn.so
    libct.so =>      /.../sybase12_5/OCS-12_5/lib/libct.so
    libcs.so =>      /.../sybase12_5/OCS-12_5/lib/libcs.so
    ...
   <snip other libraries>
    ...

If you see 'libintl.so' linking anywhere else, this is likely because the PHP build has incorrectly linked to a slightly different filename - libintl.so.1 - which doesn't exist in the Sybase client. Unfortunately a completely unrelated library of the same name does exist elsewhere in Unix! (Apparently the Sybase version was created before the duplicate was introduced into Unix).

My workaround was to create the following symlink in sybase client library 'lib' directory -

  libintl.so.1 -> ./libintl.so*

'make distclean' in your PHP build directory, and repeat the build as above.
up
-2
greg dot fenton at ianywhere dot com
19 years ago
For Sybase/iAnywhere SQL Anywhere (a.k.a Adaptive Server Anywhere, a.k.a. ASA), you likely should try the SQLAnywhere PHP module [which now ships with ASA as of 9.0.2]:

    http://www.ianywhere.com/developer/code_samples/sqlany_php_module.html

ASA can work with TDS (Open Client), but if performance is something you care about you likely want to use the native ASA interface.  For info/help, consider posting to sybase.public.sqlanywhere.general or sybase.public.sqlanywhere.linux  (http://www.ianywhere.com/support/newsgroups.html)

Hope this helps,
greg.fenton
To Top