클래스 자동로딩

많은 개발자들이 객체지향 어플리케이션을 만들때 클래스 하나당 하나의 php 소스파일을 만들어 클래스를 정의합니다. 스크립트마다 매번 이렇게 많은 클래스를 include 하는것은 꽤 성가신 일입니다.

php 5 에서는 더 이상 그렇게 하지 않아도 됩니다. __autoload() 함수를 정의하면 사용하려는 클래스나 인터페이스가 아직 정의되지 않았을 경우 자동으로 호출됩니다. 이 함수는 PHP가 오류로 실패하기 이전에 적절한 class가 로드 될수 있도록 마지막 기회를 제공합니다.

Tip

spl_autoload_register() 는 클래스 자동로딩에 대한 더욱 유연한 기능을 제공합니다. 이러한 이유로 __autoload() 가 미래에는 완전히 제거되거나, 사용을 지양하게 될지도 모릅니다.

Note:

5.3.0 이전에서는 __autoload 함수 내부에서 발생한 exception은 catch 블럭으로 catch되지 않고, fatal 에러를 야기했습니다. 5.3.0 이상부터는 catch 블럭으로 catch할 수 있게 되었습니다. 하지만 한가지 조건이 있습니다. 사용자정의 exception을 발생시킬때 사용자정의 exception class가 이미 존재해야 합니다. __autoload 함수를 재귀적으로 사용해서 사용자정의 exception class를 로드 시키는것도 한가지 방법이 될수 있습니다.

Note:

CLI에서는 자동로딩을 지원하지 않습니다. interactive mode.

Note:

클래스명을 call_user_func() 에서 사용하는 경우, ../과 같은 위험한 문자가 포함되어 있을 수가 있습니다. 사용자가 입력한 값을 그대로 사용하지 않을것을 권장하며, 아니면 최소한 __autoload() 에서 입력값을 검증해줘야 합니다.

Example #1 자동로딩 예제

이 예제는 MyClass1MyClass2를 각각 MyClass1.phpMyClass2.php로부터 로드를 시도합니다.

<?php
function __autoload($class_name) {
    include 
$class_name '.php';
}

$obj  = new MyClass1();
$obj2 = new MyClass2(); 
?>

Example #2 다른 자동로딩 예제

이 예제는 ITest 인터페이스의 로드를 시도합니다.

<?php

function __autoload($name) {
    
var_dump($name);
}

class 
Foo implements ITest {
}

/*
string(5) "ITest"

Fatal error: Interface 'ITest' not found in ...
*/
?>

Example #3 5.3.0 이후의 자동로딩 예외 핸들링

이 예제는 예외를 발생하고, tray/catch 블럭을 사용하는 모습을 보여줍니다.

<?php
function __autoload($name) {
    echo 
"Want to load $name.\n";
    throw new 
Exception("Unable to load $name.");
}

try {
    
$obj = new NonLoadableClass();
} catch (
Exception $e) {
    echo 
$e->getMessage(), "\n";
}
?>

위 예제의 출력:

Want to load NonLoadableClass.
Unable to load NonLoadableClass.

Example #4 5.3.0 이후의 자동로딩 예외 핸들링 - 사용자정의 exception 을 찾을수 없음

이 예제는 로딩할 수 없는 사용자정의 exception 에 대한 경우를 보여줍니다.

<?php
function __autoload($name) {
    echo 
"Want to load $name.\n";
    throw new 
MissingException("Unable to load $name.");
}

try {
    
$obj = new NonLoadableClass();
} catch (
Exception $e) {
    echo 
$e->getMessage(), "\n";
}
?>

위 예제의 출력:

Want to load NonLoadableClass.
Want to load MissingException.

Fatal error: Class 'MissingException' not found in testMissingException.php on line 4

add a note add a note

User Contributed Notes 45 notes

up
63
jarret dot minkler at gmail dot com
10 years ago
You should not have to use require_once inside the autoloader, as if the class is not found it wouldn't be trying to look for it by using the autoloader.

Just use require(), which will be better on performance as well as it does not have to check if it is unique.
up
71
ej at campbell dot name
9 years ago
You don't need exceptions to figure out if a class can be autoloaded. This is much simpler.

<?php
//Define autoloader
function __autoload($className) {
      if (
file_exists($className . '.php')) {
          require_once
$className . '.php';
          return
true;
      }
      return
false;
}

function
canClassBeAutloaded($className) {
      return
class_exists($className);
}
?>
up
26
str at maphpia dot com
3 years ago
This is my autoloader for my PSR-4 clases. I prefer to use composer's autoloader, but this works for legacy projects that can't use composer.

<?php
/**
* Simple autoloader, so we don't need Composer just for this.
*/
class Autoloader
{
    public static function
register()
    {
       
spl_autoload_register(function ($class) {
           
$file = str_replace('\\', DIRECTORY_SEPARATOR, $class).'.php';
            if (
file_exists($file)) {
                require
$file;
                return
true;
            }
            return
false;
        });
    }
}
Autoloader::register();
up
9
jbarker at erepublic dot com
11 years ago
In a subclass, I was trying to call an overridden parent method with an arbitrary number of arguments:

<?php
call_user_func_array
(array('parent', 'someNonStaticMethod'), $args);
?>

It turns out this triggers an E_STRICT level warning. So I changed to this:

<?php
call_user_func_array
(array($this, 'parent::someNonStaticMethod'), $args);
?>

This doesn't trigger any warnings, but it has the undesirable (if not downright buggy) effect of calling my __autoload() function with the argument 'parent'. I had to modify __autoload() to handle this special situation:

<?php
function __autoload($cls)
{
    if (
'parent' != $cls)
    {
        require(
"class.$cls.php");
    }
}
?>

Tested on Linux with PHP 5.1.6 and 5.2.5.
up
24
james dot dot dot dunmore at gmail dot com
11 years ago
Andrew: 03-Nov-2006 12:26

That seems a bit messy to me, this is a bit neater:
<?php
   
function __autoload($class_name)
    {
       
//class directories
       
$directorys = array(
           
'classes/',
           
'classes/otherclasses/',
           
'classes2/',
           
'module1/classes/'
       
);
       
       
//for each directory
       
foreach($directorys as $directory)
        {
           
//see if the file exsists
           
if(file_exists($directory.$class_name . '.php'))
            {
                require_once(
$directory.$class_name . '.php');
               
//only require the class once, so quit after to save effort (if you got more, then name them something else
               
return;
            }           
        }
    }
up
10
peter dot gooman at gmail dot com
12 years ago
Before you start using __autload, remember that it holds no scope/namespace. This means that if you are depending on third party applications and they have an autoload function defined and so do you, your application will error.

To remedy this, everyone should look at the spl_autoload functions, eg: spl_autoload_register. This function allows more than one custom functions to be called through the default spl_autoload (default __autoload) handler.
up
19
fka at fatihkadirakin dot com
9 years ago
Or you can use this, without using any "require/include":

<?php
class autoloader {

    public static
$loader;

    public static function
init()
    {
        if (
self::$loader == NULL)
           
self::$loader = new self();

        return
self::$loader;
    }

    public function
__construct()
    {
       
spl_autoload_register(array($this,'model'));
       
spl_autoload_register(array($this,'helper'));
       
spl_autoload_register(array($this,'controller'));
       
spl_autoload_register(array($this,'library'));
    }

    public function
library($class)
    {
       
set_include_path(get_include_path().PATH_SEPARATOR.'/lib/');
       
spl_autoload_extensions('.library.php');
       
spl_autoload($class);
    }

    public function
controller($class)
    {
       
$class = preg_replace('/_controller$/ui','',$class);
       
       
set_include_path(get_include_path().PATH_SEPARATOR.'/controller/');
       
spl_autoload_extensions('.controller.php');
       
spl_autoload($class);
    }

    public function
model($class)
    {
       
$class = preg_replace('/_model$/ui','',$class);
       
       
set_include_path(get_include_path().PATH_SEPARATOR.'/model/');
       
spl_autoload_extensions('.model.php');
       
spl_autoload($class);
    }

    public function
helper($class)
    {
       
$class = preg_replace('/_helper$/ui','',$class);

       
set_include_path(get_include_path().PATH_SEPARATOR.'/helper/');
       
spl_autoload_extensions('.helper.php');
       
spl_autoload($class);
    }

}

//call
autoloader::init();
?>
up
4
petyo()architect . bg
14 years ago
The following function may be useful if you want to simulate namespaces and autoloading behavior:

define ("CLASS_ROOT", '/classes/');
function __autoload ($className)
{
    require_once CLASS_ROOT.str_replace('_', '/', $className).'.class.php';
}

Then you will just have to use the folder structure and name the classes accordingly. If you want to have a class named Page, which will be in the pseudo namespace System.Web.UI, create a directory named System in /classes, then create Web, then UI, then name the class System_Web_UI_Page. Kind of long to type if you don't have autocomplete, but at least you will not have to manage the loading of all the classes' definitions.
up
10
Chris Corbyn (chris AT w3style.co.uk)
13 years ago
I'm sure this is needed by more than me.

My objective was to allow __autoload() to be easily extended in complex systems/frameworks where specific libraries etc may need loading differently but you don't want to hard-code little adjustments into your working __autoload() to allow this to happen.

Using a ServiceLocator object with some static methods and properties to allow loosely coupled locators to be attached to it you can swap/change and add to the functionality of your __autoload() at runtime.

The core stuff:
<?php

/**
* Defines the methods any actual locators must implement
* @package ServiceLocator
* @author Chris Corbyn
*/
interface Locator
{
   
/**
     * Inform of whether or not the given class can be found
     * @param string class
     * @return bool
     */
   
public function canLocate($class);
   
/**
     * Get the path to the class
     * @param string class
     * @return string
     */
   
public function getPath($class);
}

/**
* The main service locator.
* Uses loosely coupled locators in order to operate
* @package ServiceLocator
* @author Chris Corbyn
*/
class ServiceLocator
{
   
/**
     * Contains any attached service locators
     * @var array Locator
     */
   
protected static $locators = array();
   
   
/**
     * Attach a new type of locator
     * @param object Locator
     * @param string key
     */
   
public static function attachLocator(Locator $locator, $key)
    {
       
self::$locators[$key] = $locator;
    }
   
/**
     * Remove a locator that's been added
     * @param string key
     * @return bool
     */
   
public static function dropLocator($key)
    {
        if (
self::isActiveLocator($key))
        {
            unset(
self::$locators[$key]);
            return
true;
        }
        else return
false;
    }
   
/**
     * Check if a locator is currently loaded
     * @param string key
     * @return bool
     */
   
public static function isActiveLocator($key)
    {
        return
array_key_exists($key, self::$locators);
    }
   
/**
     * Load in the required service by asking all service locators
     * @param string class
     */
   
public function load($class)
    {
        foreach (
self::$locators as $key => $obj)
        {
            if (
$obj->canLocate($class))
            {
                require_once
$obj->getPath($class);
                if (
class_exists($class)) return;
            }
        }
    }
}

/**
* PHPs default __autload
* Grabs an instance of ServiceLocator then runs it
* @package ServiceLocator
* @author Chris Corbyn
* @param string class
*/
function __autoload($class)
{
   
$locator = new ServiceLocator();
   
$locator->load($class);
}

?>

An example Use Case:
<?php

require 'ServiceLocator.php';

//Define some sort of service locator to attach...
class PearLocator implements Locator
{
    protected
$base = '.';
   
    public function
__construct($directory='.')
    {
       
$this->base = (string) $directory;
    }
   
    public function
canLocate($class)
    {
       
$path = $this->getPath($class);
        if (
file_exists($path)) return true;
        else return
false;
    }
   
    public function
getPath($class)
    {
        return
$this->base . '/' . str_replace('_', '/', $class) . '.php';
    }
}

// ... attach it ...
ServiceLocator::attachLocator(new PearLocator(), 'PEAR');

// ... and code away....
$foo = new Foo_Test();

?>
up
2
alexey at renatasystems dot org
13 years ago
While using an "autoloading" method you should pay attention to variables scope. Because of new file will be included INSIDE of magic function __autoload - all of declared in such file global scope variables will be only available within this function and nowhere else. This will cause strange behaviour in some cases. For example:

file bar.class.php:

<?php

$somedata
= 'Some data';     /* global scope in common way */

class bar {

    function
__construct()   
    {   
        global
$somedata;    /* reference to global scope variable */
       
       
if ( isset($somedata) )
        {
           
var_dump($somedata);
        }
        else
        {
            die(
'No data!');
        }
    }
}
?>

Attempt to load this file in common way:

<?php

require 'bar.class.php';

$foo = new bar();

?>

this will output (as expected):

string(9) "Some data"

But in case of __autoload:

<?php

function __autoload($classname)
{
    require
$classname . '.class.php';
}

$foo = new bar();

?>

you could expect that this script will return the same but no, it will return "No data!", because defenition of $somedata after requiring treats as local within user-defined function __autoload().
up
1
RQuadling at GMail dot com
13 years ago
An issue I've had with using the __autoload function is getting it into the application.

You have to have the function included in every topmost script. This is a pain if the entire application is OOP and an "app" can be just a component of another "app".

A solution I've found is to use php.ini's auto_prepend_file setting.

Mine is set to ...

auto_prepend_file = auto_loader.php

The auto_loader.php script contains a single function. The __autoload() function.

The include_dir path IS examined to find this file, so you can just put it with the rest of your includable files.

A useful additional facility here is that you could log which classes are used by a script at runtime. Very useful if you have object factories and can't know the load at design time.

Also, assigning the uncaught exception handler and the error handlers in this file means your entire site WILL have some global protection without you having to deal with it on a script by script basis.

If you do not have access to the PHP.INI file, or you are running on a shared server, you may not be able to set this property. In those cases, you may be able to set the value using .htaccess. (NOTE: UNTESTED as I don't use Apache).

<IfModule mod_php5.c>
  php_value auto_prepend_file "auto_loader.php"
</IfModule>

You COULD therefore have a different set of rules per subdomain (if you have multiple subdomains, say, live, test, beta, devel) or whatever takes your fancy.

For more details on this see the "Description of core php.ini directives" (http://www.php.net/manual/en/ini.core.php)
up
7
rojoca
12 years ago
Be careful when using eval (as always) in __autoload. The following:

<?php

echo 'Start->';

function
__autoload($class) {
    eval(
'class ' . $class . ' {};');
}

$class = 'Class1{}; echo "uh oh"; class Class2';

$obj = new $class;

echo
'end';
?>

outputs:

Start->uh oh

You can use preg_replace to clean up $class to prevent executing abitrary code but in this case you won't be able to throw a catchable exception and your script will end with a fatal error.
up
6
muratyaman at gmail dot com
11 years ago
__autoload() function can be very useful to optimize your code esp. when you have so many classes.

Unlike class extensions, optional parameters with class restrictions may not load your class.

<?php
class bClass{
  function
fun($p1, aClass $p2=NULL){
   
//do something
 
}
}

//depending on the usage
$b = new bClass();
$b->fun('No!');//this will not load class file for aClass
$b->fun('Really?', new aClass('Yes!'));//this will

?>

So, it's very encouraging to use classes everywhere!
Even encapsulating your functions inside simple classes to use like static modules, will help a lot!

Let's say, you have <b>50k</b> lines of code inside <b>100</b> classes/files.. If you need a simple task to do very quickly, you should not be loading all of those files, except the ones you need.

Though, it may be dangerous on some cases regarding the dependencies, load order, etc. Carefully design your classes.
up
4
kalkamar at web dot de
11 years ago
Because static classes have no constructor I use this to initialize such classes.
The function init will (if available) be called when you first use the class.
The class must not be included before, otherwise the init-function wont be called as autoloading is not used.

<?php
function __autoload($class_name)
{
    require_once(
CLASSES_PATH.$class_name.'.cls.php');
    if(
method_exists($class_name,'init'))
       
call_user_func(array($class_name,'init'));
    return
true;
}
?>

I use it for example to establish the mysql-connection on demand.

It is also possilbe do add a destructor by adding this lines to the function:
<?php
if(method_exists($class_name,'destruct'))
   
register_shutdown_function(array($class_name,'destruct'));
?>
up
2
gonix
13 years ago
in response to alexey at renatasystems dot org:

You may add ``global $somedata;`` before ``$somedata = 'Some data';`` and it should work as expected.

file bar.class.php:

<?php

global $somedata;
$somedata = 'Some data';    /* global scope in common way */

class bar {

   function
__construct()  
   {  
       global
$somedata;    /* reference to global scope variable */
     
      
if ( isset($somedata) )
       {
          
var_dump($somedata);
       }
       else
       {
           die(
'No data!');
       }
   }
}
?>

'common way':
<?php

require 'bar.class.php';

$foo = new bar();

?>

'__autoload way':
<?php

function __autoload($classname)
{
   require
$classname . '.class.php';
}

$foo = new bar();

?>

Both 'comon way' and '__autoload way' should give same result:
string(9) "Some data"
up
3
david dot thalmann at gmail dot com
12 years ago
Note to Ricos posting:
A lot of useless Coding. However, I improved the code, so now it will be able to find any folders ("." and ".." will not being tested... oO) and search as deep as possible. Now it will find CLASS_DIR/foo/bar.class.php also like CLASS_DIR/foo/bar/baz/buz/fii/and/so/on/class.php

Warning: This code will check ALL dirs who're "deeper" / "lower" than the class dir, so prevent deeply hidden files (or use just a few folders).

Improved Version:
<?php

// change this, if this code isn't "higher" than ALL classfiles
define("CLASS_DIR", dirname(__FILE__));

/**
* autoload classes (no need to include them one by one)
*
* @uses classFolder()
* @param $className string
*/
function __autoload($className) {
   
$folder = classFolder($className);

    if(
$folder)
        require_once(
$folder.$className.".class.php");
}

/**
* search for folders and subfolders with classes
*
* @param $className string
* @param $sub string[optional]
* @return string
*/
function classFolder($className, $sub = "/") {
   
$dir = dir(CLASS_DIR.$sub);
   
    if(
file_exists(CLASS_DIR.$sub.$className.".class.php"))
        return
CLASS_DIR.$sub;

    while(
false !== ($folder = $dir->read())) {
        if(
$folder != "." && $folder != "..") {
            if(
is_dir(CLASS_DIR.$sub.$folder)) {
               
$subFolder = classFolder($className, $sub.$folder."/");
               
                if(
$subFolder)
                    return
$subFolder;
            }
        }
    }
   
$dir->close();
    return
false;
}

?>
up
7
qfox at ya dot ru
8 years ago
More simpler example of using spl_autoload_register in 5.3:
<?php
spl_autoload_register
(function($classname) /* usign $app */ {
 
# ... your logic to include classes here
});
?>
up
4
Anonymous
9 years ago
It's worth to mention, if your operating system is case-sensitive you need to name your file with same case as in source code eg. MyClass.php instead of myclass.php
up
2
pier4r
5 years ago
Just a small autoload class (that works if you use corretly names, namespaces, uses and so on) found elsewhere with a small modification for linux:

<?php
//from http://www.phpfreaks.com / tutorial / oo - php - part - 1 - oop - in - full - effect
function __autoload($className)  {
 
var_dump($className);
 
$file = str_replace('\\', DIRECTORY_SEPARATOR, $className) . '.php';
 
var_dump($file);

 
var_dump(file_exists($file));
  if (!
file_exists($file)) {
    return
false;
  }
  else {
    require
$file;
    return
true;
  }
}
?>
up
4
zachera
10 years ago
I found out a neat way to centralize one single class which will give accessibility to other classes.  I also added a parameter to the __construct method which would be an array of classes you want loaded.  This isn't completely necessary, but it will stop "excessive memory" if you're loading a bunch of unused classes.

<?php
class Bot {
    private
$classes = array (
       
'Socket' => "connection/class.Socket.php",
       
'Input'  => "io/class.Input.php",
       
'Output' => "io/class.Output.php",
       
'Parse'  => "io/parse/class.Parse.php"
   
);
    public
$Socket, $Input, $Output, $Parse; // Accessible by other classes

   
public function __construct($load=false){
        if(
is_array($load)){
            foreach(
$load as $class){
                if(isset(
$this->classes[$class])){
                    require(
$this->classes[$class]);
                   
$this->$class = new $class($this);
                }
            }
        } else {
            foreach(
$this->classes as $class => $path){
                require(
$path);
               
$this->$class = new $class($this);
            }
        }
    }
}
?>
up
3
Peminator
10 years ago
My idea for autoloading FUNCTIONS however only in a weird way :

<?php
function ex($parms)
{
  
$argvar = func_get_args();
  
$func = $argvar[0];
  
$funcargs = array_slice($argvar,1);
  
if (
function_exists($func))
   {
  
$returnvalue = call_user_func_array($func,$funcargs);
   }
else
   {
  
$funcpath = "scripts/".$func.".php";
   require_once(
$funcpath);
  
   if (
function_exists($func))
      {
     
$returnvalue = call_user_func_array($func,$funcargs);
      } 
   else
      {
         die
"SORRY  $func IS NOT USABLE";
      }
   }

// return returned value :-)
return $returnvalue;
}
?>

USAGE EXAMPLE:
must be caled using the X function giving the real function as first parameter, like:
$result = ex("add",1,2);
// returns 3 if add function defined in add.php sums the first and second parameter..
up
2
roman dot drapeko at gmail dot com
10 years ago
Hi there,

I have developed a small script, that can scan recursively folders and files ang generate array of associations between classes/interfaces and their locations. It accepts several incoming parameters and it's very simple to use.

An example of generated array is shown bellow.

<?php

    $autoload_list
= array (
     
'classes' => array (
       
'A' => array ('path' => 'Project/Classes/Children/A.php',
         
'extends' => array (), 'implements' => array ('I1')),
       
'C' => array ('path' => 'Project/Classes/C.php',
         
'extends' => array ('B'), 'implements' => array ('I1', 'I3')),
      ),
     
'interfaces' => array (
       
'I2' => array ('path' => 'Project/Interfaces/blablabla.php', 'extends' => array ('I1')),
       
'I1' => array ('path' => 'Project/Interfaces/I1.php', 'extends' => array ()),
      ),
    );
?>

When you know names and their locations, you know everything to load these classes.

It uses regular expressions to identify if class/interfaces is located in the current file.

I tried to post the code, but it's very long. You can download the script from http://wp.drapeko.com/store/php-autoloading-files/.
up
2
matias dot cohen at gmail dot com
11 years ago
Another way of throwing exceptions inside an __autoload() function:
<?php

function myExceptionHandler($e) {
   
// Add code here
}

set_exception_handler('myExceptionHandler');

function
__autoload($class) {
    if (
class_exists($class, false) || interface_exists($class, false)) {
        return;   
    }
    try {
        @require_once(
'path/to/' . $class . '.php');
        if (!
class_exists($class, false) || !interface_exists($class, false)) {
            throw new
Exception('Class ' . $class . ' not found');
        }
    }
    catch (
Exception $e) {

       
myExceptionHandler($e);
    }
}

?>
up
3
Rico
12 years ago
This autoload function searches for the class Location before requiring it. So there's no need of putting the classes all in one folder.

Requirements:
- the subfolders must be at least 3 letters long
- the filenames must be in the form CLASSNAME.class.php

Note:
- in this example the main class folder is 'lib'

define('ROOT_DIR', dirname(__FILE__).'/');

function __autoload($className) {
    $folder=classFolder($className);
    if($folder) require_once($folder.'/'.$className.'.class.php');
}

function classFolder($className,$folder='lib') {
    $dir=dir(ROOT_DIR.$folder);
    if($folder=='lib' && file_exists(ROOT_DIR.$folder.'/'.$className.'.class.php')) return $folder;
    else {
        while (false!==($entry=$dir->read())) {
            $checkFolder=$folder.'/'.$entry;
            if(strlen($entry)>2) {
                if(is_dir(ROOT_DIR.$checkFolder)) {
                    if(file_exists(ROOT_DIR.$checkFolder.'/'.$className.'.class.php')) return $checkFolder;
                    else {
                        $subFolder=classFolder($className,$checkFolder);
                        if($subFolder) return $subFolder;
                    }
                }
            }
        }
    }
    $dir->close();
    return 0;
}
up
1
dave60 /at/ gmail /dot/ com
13 years ago
In reply to quetzalcoatl:

Generally, I would advise for each class to have it's own file, and hold nothing besides that class. Just define __autoload() in a/the infrastructure file -- a/the file that does the behavioral logic, and there should be no need to redefine it in a class' file.
up
2
tlang at halsoft dot com
6 years ago
This page states that autoloading does not work when PHP is used in CLI mode but a simple test seems to contradict this.

Create a file /tmp/Foo.php containing:

<?php
class Foo {
    public function
__construct() {
        echo
"Inside the Foo constructor\n";
    }
}
?>

Create a script (NOT in /tmp) containing:

<?php

function test_autoload($class) {
    require_once
'/tmp/'.$class.'.php';
}

spl_autoload_register('test_autoload');
$foo = new Foo();
?>

Execute the script on the command line. The echo statement in the constructor produces output to STDOUT.

This also works with __autoload

<?php

function __autoload($class) {
    require_once
'/tmp/'.$class.'.php';
}

$foo = new Foo();
?>
up
3
me at mydomain dot com
14 years ago
You can enable this behaviour for undefined classes while unserializing objects by setting the .ini-variable 'unserialize_callback_func' to '__autoload'.
up
2
chris (at) xeneco (dot) co (dot) uk
11 years ago
I'm very taken with the autoload function, and thought I would share with you my implementation of it:
<?php
function __autoload($class_name) {

   
//my settings class is a singleton instance that has parsed an ini file containing the locations of all classes
   
$settings = Settings::Load();
   
$classes = $settings->getSettings('classes');

   
$path = $classes[$class_name];
   
    if(
file_exists($path)) {
        require_once(
$path);
        return
true;
    } else {
       
clearstatcache();
       
$classes = $settings->ReLoadSettings();
       
$path = $classes['classes'][$class_name];
    }
       
    if(
file_exists($path)) {
        require_once(
$path);
        return
true;
    } else {
        die(
"The requested library,".$class_name.", could not be found at ".$classes[$class_name][$i].". Please check your ini file");
    }
}
?>
up
1
claude dot pache at gmail dot com
10 years ago
About static classes that need initialisation before use (problem discussed by adam at greatbigmassive dot net and kalkamar at web dot de below).

Simple problems have often simple solutions. Here is my approach:

First, my __autoload function is very simple:
<?php
function __autoload ($class_name)
{
    if (
preg_match('|^\w+$|', $class_name))
        include
"./packages/$class_name.php";
}
?>
(The "if/preg_match" line is just a simple yet robust security check. Moreover I use "include" and not "require"/"require_once", so that if the file is not found, the __autoload function does nothing, and my script dies eventually with a meaningful "Class 'foo' not found"  fatal error.)

Now, when I define a class "foo" which requires initialisation before use, I just write the initialisation code after the definition of the class in the file "packages/foo.php":

<?php
/** Content of file "packages/foo.php" **/
class foo
{
   
/* definition of the class is found here */
}

/* initialisation code of the class is found here. */

/** End of file "packages/foo.php" **/
?>

That's it. No need for an <? init() ?> or a <? __construct() ?> method.
up
1
richard [at ] xanox [dot] net
12 years ago
I've made this little script here which looks in a dir, and loads all the classed, and includes their files.

$myDirectory = opendir("required/classes");

// get each entry
while($entryName = readdir($myDirectory)) {
    $dirArray[] = $entryName;
}

// close directory
closedir($myDirectory);

//    count elements in array
$indexCount    = count($dirArray);
sort($dirArray);

for($index=0; $index < $indexCount; $index++) {
    if($dirArray[$index] != '.' AND $dirArray[$index] != '..') {
        include("required/classes/$dirArray[$index]");
        $classname = strtolower($dirArray[$index]);
        $classname = str_replace('.php','',$classname);
        $classinit = str_replace('.php','',$dirArray[$index]);

        $$classname = new $classinit;
    }
}
up
1
norwood at computer dot org
5 years ago
Autoloaders & Namespaces: The effective namespace of an autoloaded file must match that of its original reference; just  finding and loading the file isn't enough. (I know, seems obvious now, but...)

My namespaces may serve as hints to locations within the file system, and I tried to be cute:
     If a class (file) wasn't found where it was expected, my autoloader also looked in an alternate location. This worked fine, except that the alternate's own qualified namespace was thus slightly different (reflecting where *it* lived). So although the desired class was ultimately loaded (name and all), the original caller's reference remained unsatisfied because of the namespace discrepancy (as it should, really), but it was subtle.

Of course, this scheme works fine within the same namespace (explicit or not).

And kudos to the autoload devs for anticipating what could have been an endless autoload loop.
up
1
php at kaiundina dot de
14 years ago
The autoload-feature allows to add the behavior of static constructors (like in C#). Static constructors should be called on the first occurence of a class reference - typically a 'new' operator or a static call to a class's operation.

They can be used used to initialize complex static properties.

And here is an easy and save way how it can be done:

Content of MyClass.class.php5:
<?php

// demo class persisting of a static and a dynamic constructor
class MyClass
{
   
   
// static constructor operation
   
public static function _construct()
    {
       
// just say hello
       
echo '<div>static constructor</div>';
    }
   
   
// default dynamic constructor operation
   
public function __construct()
    {
       
// just say hello
       
echo '<div>dynamic constructor</div>';
    }
   
}

?>

Content of index.php5:
<?php

// declare handler for any unknown class request
function __autoload($aClassName)
{
   
// load the class
   
require_once ($aClassName . '.class.php5');

   
// create a reference to the static constructor's operation
   
$staticConstructorReference = array($aClassName, '_construct');
   
   
// if the static constructor was declared properly...
   
if (is_callable($staticConstructorReference))
    {
       
// call the static constructor
       
call_user_func($staticConstructorReference);
    }
}

// create an example object to see both constructors being executed
$article = new MyObject();

?>
up
1
christian.reinecke at web.de
12 years ago
do not use is_subclass_of() in your __autoload() function to identify a class type and thereby its path (f.e exceptions). is_subclass_of() needs to know the class, but you want to check BEFORE you include the class.
up
1
oliver dot strevel at gmail dot com
5 years ago
My autoloader function:

<?php

/**
* Funcion de autocarga de clases para php
* Se realiza la busqueda directamente sobre la raiz de la carpeta lib con el prefijo '.class.php'
*/
function __autoload( $class_name )
{
   
$invalidChars = array(
       
'.', '\\', '/', ':', '*', '?', '"', '<', '>', "'", '|'
   
);
   
   
$class_name = str_replace($invalidChars, '', $class_name);
   
   
$extension_prefix = '.class.php';
   
    if( !@include_once
$class_name . $extension_prefix )
    {
       
$path = 'lib'; // In this dir the function will search
       
       
foreach( new DirectoryIterator($path) as $file )
        {
            if(
$file->isDot()) { continue; }
           
            if(
$file->isDir())
            {
               
$file = $path . DIRECTORY_SEPARATOR . $file->getFilename() . DIRECTORY_SEPARATOR . $class_name . $extension_prefix;   
               
                if(
file_exists($file)) {
                    include_once
$file;
                }
            }
        }   
    }
    if (!
class_exists($class_name, false) || !interface_exists($class_name, false)) {
       
// return || Some tracking error task..
   
}
}
?>
up
1
emcmanus at gmail dot com
12 years ago
Note: if you're experiencing unexpected "failed opening required 'filename.php' (include..." errors:

If you placed your autoload function in an external file which you're requiring at the head of every script, be cautious of some odd behavior regarding PHP's idea of the current working directory.

I ran into some unexpected path issues when my include file was placed in a subdirectory directory. The solution to my problems was to make sure that the autoload script being included is in the same directory as the calling script.
up
1
julian at jxmallett dot com
5 years ago
The tip to use spl_autoload_register() instead of __autoload() should be taken seriously. It seems that __autoload() doesn't always get called when calling an unloaded class within a class, eg:

<?php
class MyClass {
    public static function
doStuff() {
       
//do some stuff
       
$a = MyOtherClass::otherStuff();
    }
}
?>

Code similar to that gave me a 'class not found' error when using __autoload(). Using spl_autoload_register() with the exact same autoload function fixed the problem.
up
1
tom at r dot je
9 years ago
To find out whether a class can be autoloaded, you can use autoload in this way:

<?php
//Define autoloader
function __autoload($className) {
    if (
file_exists($className . '.php')) require $className . '.php';
    else throw new
Exception('Class "' . $className . '" could not be autoloaded');
}

function
canClassBeAutloaded($className) {
    try {
       
class_exists($className);
        return
true;
    }
    catch (
Exception $e) {
        return
false;
    }
}
?>
up
1
pinochet dot pl at gmail dot com
10 years ago
To use autoload function with namespaces you should remember to define it in main scope in "\" namespace.
up
0
jcastromail at yahoo dot es
1 year ago
It's a shame that PHP doesn't support autoload similar to C# or Java.

I tried composer's autoload and it forces you to work in some way and sometimes it doesn't work.  For example, classes without namespace.

So created a project (it's free) that autoload practically any class automatically without impacting the performance (pre-process).

https://github.com/EFTEC/AutoLoadOne

It works with classes with or without namespace, many classes in a single file, many namespaces in a single file and a namespace per folder or namespace in different folders.   So it works with new and old code and with different specifications, psr-0 or psr-4.
up
0
dsimer at gmail dot com
4 years ago
On the if/else, you are better off either entering a break after success and continue on else (if you feel as though you have to return something), or otherwise not putting in an else.  the else with return will cause a premature end to the function.

Also, if you use an array of directories, it may be a good idea to enter a blank ('') as the first value so that the script will check locally.
up
0
khan at swcombine dot com
10 years ago
As an addendum to #91119 I would suggest adding class_exists() into that solution. I've just implemented autoloading based on the code provided there and ran into a problem where a file had the same name as a class, existed in the directory structure prior to the file that had the actual class and as a result was being included first and resulting in a 'class not found' error.

<?php
if(file_exists($path)) {
    require_once
$path;
    if(
class_exists($class_name)) {
        return;
    }
}
?>
up
0
andrew dot delete dot cornes at gmail dot delete dot com
13 years ago
If you'd like '__autoload()' to support multiple class folders, each containing multiple class files (one per class), you may want to try something like this (file '__autoload.php'):

<?php

define
('CLASS_FILENAME_SUFFIX', '.class.php');

function
__autoload($className)
{
   
$__autoloadAbsolutePath = dirname(__FILE__);

   
// 'pathStart' is your web application root folder.
    // (This may or may not be where '__autoload.php'
    // resides; let's assume here that it resides one
    // level 'below' the web app root.)
   
$pathStart = $__autoloadAbsolutePath .
       
DIRECTORY_SEPARATOR . '..' . DIRECTORY_SEPARATOR;

   
// 'classPath' is a list of class folders to look in.
    // (In this example, there's just one: 'classlibs/lib1'.
    // To add more, simply append them; start with
    // 'PATH_SEPARATOR . $pathStart .', and off you go...)
   
$classPath = PATH_SEPARATOR . $pathStart .
       
'classlibs' . DIRECTORY_SEPARATOR . 'lib1';

   
// Add list of class folders to 'include_path' for the
    // forthcoming 'require()' (or similar directive).
   
$oldIncludePath = get_include_path();
   
set_include_path($oldIncludePath . $classPath);

    require_once(
$className . CLASS_FILENAME_SUFFIX);

   
// Reinstate initial 'include_path'.
   
set_include_path($oldIncludePath);
}

?>

As your web application develops, new paths containing class files can be added into the '$classPath' variable within '__autoload()'. If hard-coding the '$classPath' variable isn't to your taste, you could arrange for its value to come from 'outside' in whatever way you like.

Any comments gratefully received.
up
-1
ostapk
11 years ago
To sandrejev at gmail dot com below:

if you create the exception in the __autoload() and serialize it, then when you try to access the same missing class later (in another place in the code), then the exception will contain invalid stack trace.

Also, here's an excellent blog post that discusses the consequences of using eval() as well as provides an example to handle static method calls and namespaces: http://www.onphp5.com/article/61
up
-2
Chris Continanza
11 years ago
Decided to warm up to autoload,
but wanted it to use the include_path.
Good default behavior.

function __autoload($class_name) {
      $include_path = get_include_path();
      $include_path_tokens = explode(':', $include_path);
     
      foreach($include_path_tokens as $prefix){
         $path = $prefix . '/' . $class_name . '.php';
         if(file_exists($path)){
            require_once $path;
            return;
          }
       } 
  }
up
-2
trini0
14 years ago
Be careful with using that eval() trick within __autoload().
If you use reflection in your code, the so called trick,
*can* provide ill side effects.
For example ->
$reflection = new reflectionClass('some_class');
if (FALSE === $reflection->isSubClassOf('another_class'))
{
    throw new Exception('Class "some_class" must extend base class "another_class"');
}

If the real class "another_class" doesnt exist at the time, or "some_class" doesn't extend "another_class", with the reflection test, the so called eval() trick, creates a dummy "another_class",
thereby making the reflection test useless...
To Top