Options de recherche

Les options de PCRE sont listées ci-dessous. Les noms entre parenthèses sont les noms internes à PCRE. Les espaces et les caractères de nouvelles lignes sont ignorés dans les modificateurs, les autres caractères causent des erreurs.

i (PCRE_CASELESS)
Effectue une recherche insensible à la casse.
m (PCRE_MULTILINE)
Par défaut, PCRE traite la chaîne sujet comme une seule ligne (même si cette chaîne contient des retours chariot). Le métacaractère "début de ligne" (^) ne sera valable qu'une seule fois, au début de la ligne, et le métacaractère "fin de ligne " ($) ne sera valable qu'à la fin de la chaîne, ou avant le retour chariot final (à moins que l'option D ne soit activée). C'est le même fonctionnement qu'en Perl. Lorsque cette option est activée, " début de ligne " et " fin de ligne " correspondront alors aux caractères suivant et précédent immédiatement un caractère de nouvelle ligne, en plus du début et de la fin de la chaîne. C'est le même fonctionnement que l'option Perl /m. S'il n'y a pas de caractère de nouvelle ligne "\n" dans la chaîne sujet, ou s'il n'y a aucune occurrence de ^ ou $ dans le masque, cette option ne sert à rien.
s (PCRE_DOTALL)
Avec cette option, le métacaractère point (.) remplace n'importe quel caractère, y compris les nouvelles lignes. Sans cette option, le caractère point ne remplace pas les nouvelles lignes. Cette option est équivalente à l'option Perl /s. Une classe de caractères négative telle que [^a] acceptera toujours les caractères de nouvelles lignes, indépendamment de cette option.
x (PCRE_EXTENDED)
Avec cette option, les caractères d'espacement sont ignorés, sauf lorsqu'ils sont échappés, ou à l'intérieur d'une classe de caractères, et tous les caractères entre # non échappés et en dehors d'une classe de caractères, et le prochain caractère de nouvelle ligne sont ignorés. C'est l'équivalent Perl de l'option /x : elle permet l'ajout de commentaires dans les masques compliqués. Notez bien, cependant, que cela ne s'applique qu'aux caractères de données. Les caractères d'espacement ne doivent jamais apparaître dans les séquences spéciales d'un masque, par exemple dans la séquence (?( qui introduit une parenthèse conditionnelle.
A (PCRE_ANCHORED)
Avec cette option, le masque est ancré de force, c'est-à-dire que le masque doit s'appliquer juste au début de la chaîne sujet pour être considéré comme trouvé. Il est possible de réaliser le même effet en ajoutant les métacaractères adéquats, ce qui est la seule manière de le faire en Perl.
D (PCRE_DOLLAR_ENDONLY)
Avec cette option, le métacaractère $ ne sera valable qu'à la fin de la chaîne sujet. Sans cette option, $ est aussi valable avant une nouvelle ligne, si cette dernière est le dernier caractère de la chaîne. Cette option est ignorée si l'option m est activée. Il n'y a pas d'équivalent en Perl.
S
Lorsqu'un masque est utilisé plusieurs fois, cela vaut la peine de passer quelques instants de plus pour l'analyser et optimiser le code pour accélérer les traitements ultérieurs. Cette option force cette analyse plus poussée. Actuellement, cette analyse n'est utile que pour les masques non ancrés, qui ne commencent pas par un caractère fixe.
U (PCRE_UNGREEDY)
Cette option inverse la tendance à la gourmandise des expressions régulières. Vous pouvez aussi inverser cette tendance au coup par coup avec un ? mais cela rendra gourmand la séquence. Cette option n'est pas compatible avec Perl. Elle peut aussi être mise dans le masque avec l'option ?U dans le pattern ou par un point d'interrogation avant le quantificateur (.e.g. .*?).

Note:

Il n'est généralement pas possible de faire correspondre plus que la limite de pcre.backtrack_limit caractères en mode non gourmand.

X (PCRE_EXTRA)
Cette option ajoute d'autres fonctionnalités incompatibles avec le PCRE de Perl. Tous les antislashs suivis d'une lettre qui n'aurait pas de signification particulière causent une erreur, permettant la réservation de ces combinaisons pour des ajouts fonctionnels ultérieurs. Par défaut, comme en Perl, les antislashs suivis d'une lettre sans signification particulière sont traités comme des valeurs littérales. Actuellement, cette option ne déclenche pas d'autres fonctions.
J (PCRE_INFO_JCHANGED)
L'option (?J) interne de configuration modifie l'option locale PCRE_DUPNAMES. Permet la duplication de noms pour les sous-masques. À partir de PHP 7.2.0 J est aussi supporter en tant que modificateur.
u (PCRE_UTF8)
Cette option active des fonctionnalités additionnelles de PCRE qui ne sont pas compatibles avec Perl. La chaîne d'entrée et le masque sont traités comme des chaînes UTF-8. Une chaîne d'entrée invalide aura pour conséquence une absence de correspondance dans les fonctions preg_*. Un masque invalide va lever une erreur de niveau E_WARNING. Les séquences UTF-8 de cinq et six octets sont considérées comme invalides.
n (PCRE_NO_AUTO_CAPTURE)
Ce modificateur rend les groupes simples (xyz) non capturants. Seuls les groupes nommés comme (?<name>xyz) sont capturants. Cela affecte uniquement les groupes capturants, il est toujours possible d'utiliser des références de sous-masque numérotées, et le tableau de correspondances contiendra toujours des résultats numérotés.

add a note add a note

User Contributed Notes 12 notes

up
34
hfuecks at nospam dot org
18 years ago
Regarding the validity of a UTF-8 string when using the /u pattern modifier, some things to be aware of;

1. If the pattern itself contains an invalid UTF-8 character, you get an error (as mentioned in the docs above - "UTF-8 validity of the pattern is checked since PHP 4.3.5"

2. When the subject string contains invalid UTF-8 sequences / codepoints, it basically result in a "quiet death" for the preg_* functions, where nothing is matched but without indication that the string is invalid UTF-8

3. PCRE regards five and six octet UTF-8 character sequences as valid (both in patterns and the subject string) but these are not supported in Unicode ( see section 5.9 "Character Encoding" of the "Secure Programming for Linux and Unix HOWTO" - can be found at http://www.tldp.org/ and other places )

4. For an example algorithm in PHP which tests the validity of a UTF-8 string (and discards five / six octet sequences) head to: http://hsivonen.iki.fi/php-utf8/

The following script should give you an idea of what works and what doesn't;

<?php
$examples
= array(
   
'Valid ASCII' => "a",
   
'Valid 2 Octet Sequence' => "\xc3\xb1",
   
'Invalid 2 Octet Sequence' => "\xc3\x28",
   
'Invalid Sequence Identifier' => "\xa0\xa1",
   
'Valid 3 Octet Sequence' => "\xe2\x82\xa1",
   
'Invalid 3 Octet Sequence (in 2nd Octet)' => "\xe2\x28\xa1",
   
'Invalid 3 Octet Sequence (in 3rd Octet)' => "\xe2\x82\x28",

   
'Valid 4 Octet Sequence' => "\xf0\x90\x8c\xbc",
   
'Invalid 4 Octet Sequence (in 2nd Octet)' => "\xf0\x28\x8c\xbc",
   
'Invalid 4 Octet Sequence (in 3rd Octet)' => "\xf0\x90\x28\xbc",
   
'Invalid 4 Octet Sequence (in 4th Octet)' => "\xf0\x28\x8c\x28",
   
'Valid 5 Octet Sequence (but not Unicode!)' => "\xf8\xa1\xa1\xa1\xa1",
   
'Valid 6 Octet Sequence (but not Unicode!)' => "\xfc\xa1\xa1\xa1\xa1\xa1",
);

echo
"++Invalid UTF-8 in pattern\n";
foreach (
$examples as $name => $str ) {
    echo
"$name\n";
   
preg_match("/".$str."/u",'Testing');
}

echo
"++ preg_match() examples\n";
foreach (
$examples as $name => $str ) {
   
   
preg_match("/\xf8\xa1\xa1\xa1\xa1/u", $str, $ar);
    echo
"$name: ";

    if (
count($ar) == 0 ) {
        echo
"Matched nothing!\n";
    } else {
        echo
"Matched {$ar[0]}\n";
    }
   
}

echo
"++ preg_match_all() examples\n";
foreach (
$examples as $name => $str ) {
   
preg_match_all('/./u', $str, $ar);
    echo
"$name: ";
   
   
$num_utf8_chars = count($ar[0]);
    if (
$num_utf8_chars == 0 ) {
        echo
"Matched nothing!\n";
    } else {
        echo
"Matched $num_utf8_chars character\n";
    }
   
}
?>
up
11
varrah NO_GARBAGE_OR_SPAM AT mail DOT ru
18 years ago
Spent a few days, trying to understand how to create a pattern for Unicode chars, using the hex codes. Finally made it, after reading several manuals, that weren't giving any practical PHP-valid examples. So here's one of them:

For example we would like to search for Japanese-standard circled numbers 1-9 (Unicode codes are 0x2460-0x2468) in order to make it through the hex-codes the following call should be used:
preg_match('/[\x{2460}-\x{2468}]/u', $str);

Here $str is a haystack string
\x{hex} - is an UTF-8 hex char-code
and /u is used for identifying the class as a class of Unicode chars.

Hope, it'll be useful.
up
11
phpman at crustynet dot org dot uk
12 years ago
The description of the "u" flag is a bit misleading. It suggests that it is only required if the pattern contains UTF-8 characters, when in fact it is required if either the pattern or the subject contain UTF-8. Without it, I was having problems with preg_match_all returning invalid multibyte characters when given a UTF-8 subject string.

It's fairly clear if you read the documentation for libpcre:

       In  order  process  UTF-8 strings, you must build PCRE to include UTF-8
       support in the code, and, in addition,  you  must  call  pcre_compile()
       with  the  PCRE_UTF8  option  flag,  or the pattern must start with the
       sequence (*UTF8). When either of these is the case,  both  the  pattern
       and  any  subject  strings  that  are matched against it are treated as
       UTF-8 strings instead of strings of 1-byte characters.

[from http://www.pcre.org/pcre.txt]
up
2
Anonymous
4 years ago
A warning about the /i modifier and POSIX character classes:
If you're using POSIX character classes in your regex that indicate case such as [:upper:] or [:lower:] in combination with the /i modifier, then in PHP < 7.3 the /i modifier will take precedence and effectively make both those character classes work as [:alpha:], but in PHP >= 7.3 the character classes overrule the /i modifier.
up
4
arash dot dalir at gmail dot com
6 years ago
the PCRE_INFO_JCHANGED modifier is apparently not accepted as a global option (after the closing delimiter) in PHP versions <= 5.4 (not checked in PHP 5.5) but allowed in PHP 5.6 (also not checked in PHP 7.X)

The following pattern doesn't work in PHP 5.4, but it works in PHP 5.6:

<?php
//test.php
preg_match_all('/(?<dup_name>\d{1,4})\-(?<dup_name>\d{1,2})/J', '1234-23', $matches);
var_dump($matches);

/*
output in PHP 5.4:
Warning: preg_match_all(): Unknown modifier 'J' in test.php on line 3
NULL
--------------
output PHP 5.6:
array(4) {
    [0]=> array(1)  { [0]=> string(7) "1234-23" }
    ["dup_name"]=> array(1) { [0]=> string(2) "23" }
    [1]=> array(1) { [0]=> string(4) "1234" }
    [2]=> array(1) { [0]=> string(2) "23" }
}
*/
?>

in order to resolve this issue in PHP 5.4, one can use the (?J) pattern modifier, which indicates the pattern (from that point forward) allows duplicate names for subpatterns.

code which works in PHP 5.4:
<?php

preg_match_all
('/(?J)(?<dup_name>\d{1,4})\-(?<dup_name>\d{1,2})/', '1234-23', $matches);
var_dump($matches);

/*
output in PHP 5.4:
array(4) {
    [0]=> array(1) { [0]=> string(7) "1234-23" }
    ["dup_name"]=> array(1) { [0]=> string(2) "23" }
    [1]=> array(1) { [0]=> string(4) "1234" }
    [2]=> array(1) { [0]=> string(2) "23" }
}
--------------
output in PHP 5.6 (the same as with /J):
array(4) {
    [0]=> array(1)  { [0]=> string(7) "1234-23" }
    ["dup_name"]=> array(1) { [0]=> string(2) "23" }
    [1]=> array(1) { [0]=> string(4) "1234" }
    [2]=> array(1) { [0]=> string(2) "23" }
}
*/
?>
up
7
Daniel Klein
12 years ago
If the _subject_ contains utf-8 sequences the 'u' modifier should be set, otherwise a pattern such as /./ could match a utf-8 sequence as two to four individual ASCII characters. It is not a requirement, however, as you may have a need to break apart utf-8 sequences into single bytes. Most of the time, though, if you're working with utf-8 strings you should use the 'u' modifier.

If the subject doesn't contain any utf-8 sequences (i.e. characters in the range 0x00-0x7F only) but the pattern does, as far as I can work out, setting the 'u' modifier would have no effect on the result.
up
4
michal dot kocarek at brainbox dot cz
14 years ago
In case you're wondering, what is the meaning of "S" modifier, this paragraph might be useful:

When "S" modifier is set, PHP calls the pcre_study() function from the PCRE API before executing the regexp. Result from the function is passed directly to pcre_exec().

For more information about pcre_study() and "Studying the pattern" check the PCRE manual on http://www.pcre.org/pcre.txt

PS: Note that function names "pcre_study" and "pcre_exec" used here refer to PCRE library functions written in C language and not to any PHP functions.
up
2
Hayley Watson
3 years ago
Starting from 7.3.0, the 'S' modifier has no effect; this analysis is now always done by the PCRE engine.
up
2
ebarnard at marathonmultimedia dot com
17 years ago
When adding comments with the /x modifier, don't use the pattern delimiter in the comments. It may not be ignored in the comments area. Example:

<?php
$target
= 'some text';
if(
preg_match('/
                e # Comments here
               /x'
,$target)) {
    print
"Target 1 hit.\n";
}
if(
preg_match('/
                e # /Comments here with slash
               /x'
,$target)) {
    print
"Target 1 hit.\n";
}
?>

prints "Target 1 hit." but then generates a PHP warning message for the second preg_match():

Warning:  preg_match() [function.preg-match]: Unknown modifier 'C' in /ebarnard/x-modifier.php on line 11
up
-1
Wirek
6 years ago
A hint for those of you who are trying to fight off (or work around at least) the problem of matching a pattern correctly at the end ($) of any line in multiple lines mode (/m).
<?php
// Various OS-es have various end line (a.k.a line break) chars:
// - Windows uses CR+LF (\r\n);
// - Linux LF (\n);
// - OSX CR (\r).
// And that's why single dollar meta assertion ($) sometimes fails with multiline modifier (/m) mode - possible bug in PHP 5.3.8 or just a "feature"(?).
$str="ABC ABC\n\n123 123\r\ndef def\rnop nop\r\n890 890\nQRS QRS\r\r~-_ ~-_";
//          C          3                   p          0                   _
$pat1='/\w$/mi';    // This works excellent in JavaScript (Firefox 7.0.1+)
$pat2='/\w\r?$/mi';
$pat3='/\w\R?$/mi';    // Somehow disappointing according to php.net and pcre.org
$pat4='/\w\v?$/mi';
$pat5='/(*ANYCRLF)\w$/mi';    // Excellent but undocumented on php.net at the moment
$n=preg_match_all($pat1, $str, $m1);
$o=preg_match_all($pat2, $str, $m2);
$p=preg_match_all($pat3, $str, $m3);
$r=preg_match_all($pat4, $str, $m4);
$s=preg_match_all($pat5, $str, $m5);
echo
$str."\n1 !!! $pat1 ($n): ".print_r($m1[0], true)
    .
"\n2 !!! $pat2 ($o): ".print_r($m2[0], true)
    .
"\n3 !!! $pat3 ($p): ".print_r($m3[0], true)
    .
"\n4 !!! $pat4 ($r): ".print_r($m4[0], true)
    .
"\n5 !!! $pat5 ($s): ".print_r($m5[0], true);
// Note the difference among the three very helpful escape sequences in $pat2 (\r), $pat3 (\R), $pat4 (\v) and altered newline option in $pat5 ((*ANYCRLF)) - for some applications at least.

/* The code above results in the following output:
ABC ABC

123 123
def def
nop nop
890 890
QRS QRS

~-_ ~-_
1 !!! /\w$/mi (3): Array
(
    [0] => C
    [1] => 0
    [2] => _
)

2 !!! /\w\r?$/mi (5): Array
(
    [0] => C
    [1] => 3
    [2] => p
    [3] => 0
    [4] => _
)

3 !!! /\w\R?$/mi (5): Array
(
    [0] => C

    [1] => 3
    [2] => p
    [3] => 0
    [4] => _
)

4 !!! /\w\v?$/mi (5): Array
(
    [0] => C

    [1] => 3
    [2] => p
    [3] => 0
    [4] => _
)

5 !!! /(*ANYCRLF)\w$/mi (7): Array
(
    [0] => C
    [1] => 3
    [2] => f
    [3] => p
    [4] => 0
    [5] => S
    [6] => _
)
*/
?>
Unfortunately, I haven't got any access to a server with the latest PHP version - my local PHP is 5.3.8 and my public host's PHP is version 5.2.17.
up
-1
Wirek
6 years ago
An important addendum (with new $pat3_2 utilising \R properly, its results and comments):
Note that there are (sometimes difficult to grasp at first glance) nuances of meaning and application of escape sequences like \r, \R and \v - none of them is perfect in all situations, but they are quite useful nevertheless. Some official PCRE control options and their changes come in handy too - unfortunately neither (*ANYCRLF), (*ANY) nor (*CRLF) is documented here on php.net at the moment (although they seem to be available for over 10 years and 5 months now), but they are described on Wikipedia ("Newline/linebreak options" at https://en.wikipedia.org/wiki/Perl_Compatible_Regular_Expressions) and official PCRE library site ("Newline convention" at http://www.pcre.org/original/doc/html/pcresyntax.html#SEC17) pretty well. The functionality of \R appears somehow disappointing (with default configuration of compile time option) according to php.net as well as official description ("Newline sequences" at https://www.pcre.org/original/doc/html/pcrepattern.html#newlineseq) when used improperly.

A hint for those of you who are trying to fight off (or work around at least) the problem of matching a pattern correctly at the end (or at the beginning) of any line even without the multiple lines mode (/m) or meta-character assertions ($ or ^).
<?php
// Various OS-es have various end line (a.k.a line break) chars:
// - Windows uses CR+LF (\r\n);
// - Linux LF (\n);
// - OSX CR (\r).
// And that's why single dollar meta assertion ($) sometimes fails with multiline modifier (/m) mode - possible bug in PHP 5.3.8 or just a "feature"(?) of default configuration option for meta-character assertions (^ and $) at compile time of PCRE.
$str="ABC ABC\n\n123 123\r\ndef def\rnop nop\r\n890 890\nQRS QRS\r\r~-_ ~-_";
//          C          3                   p          0                   _
$pat3='/\w\R?$/mi';    // Somehow disappointing according to php.net and pcre.org when used improperly
$pat3_2='/\w(?=\R)/i';    // Much better with allowed lookahead assertion (just to detect without capture) without multiline (/m) mode; note that with alternative for end of string ((?=\R|$)) it would grab all 7 elements as expected, but '/(*ANYCRLF)\w$/mi' is more straightforward in use anyway
$p=preg_match_all($pat3, $str, $m3);
$r=preg_match_all($pat3_2, $str, $m4);
echo
$str."\n3 !!! $pat3 ($p): ".print_r($m3[0], true)
    .
"\n3_2 !!! $pat3_2 ($r): ".print_r($m4[0], true);
// Note the difference between the two very helpful escape sequences in $pat3 and $pat3_2 (\R) - for some applications at least.

/* The code above results in the following output:
ABC ABC

123 123
def def
nop nop
890 890
QRS QRS

~-_ ~-_
3 !!! /\w\R?$/mi (5): Array
(
    [0] => C

    [1] => 3
    [2] => p
    [3] => 0
    [4] => _
)

3_2 !!! /\w(?=\R)/i (6): Array
(
    [0] => C
    [1] => 3
    [2] => f
    [3] => p
    [4] => 0
    [5] => S
)
*/
?>
Unfortunately, I haven't got any access to a server with the latest PHP version - my local PHP is 5.3.8 and my public host's PHP is version 5.2.17.
up
-7
damian dot driscoll at gmail dot com
6 years ago
The PCRE_INFO_JCHANGED modifier works in version 5.6.31 but not in 5.6.16, which generates an 'unknown modifier J' warning.
To Top