Fonctions sur les tableaux

Voir aussi

Voir aussi is_array(), explode(), implode(), preg_split() et unset().

Sommaire

  • array_change_key_case — Change la casse de toutes les clés d'un tableau
  • array_chunk — Sépare un tableau en tableaux de taille inférieure
  • array_column — Retourne les valeurs d'une colonne d'un tableau d'entrée
  • array_combine — Crée un tableau à partir de deux autres tableaux
  • array_count_values — Compte les occurrences de chaque valeur distincte dans un tableau
  • array_diff_assoc — Calcule la différence de deux tableaux, en prenant aussi en compte les clés
  • array_diff_key — Calcule la différence de deux tableaux en utilisant les clés pour comparaison
  • array_diff_uassoc — Calcule la différence entre deux tableaux associatifs, à l'aide d'une fonction de rappel
  • array_diff_ukey — Calcule la différence entre deux tableaux en utilisant une fonction de rappel sur les clés pour comparaison
  • array_diff — Calcule la différence entre des tableaux
  • array_fill_keys — Remplit un tableau avec des valeurs, en spécifiant les clés
  • array_fill — Remplit un tableau avec une même valeur
  • array_filter — Filtre les éléments d'un tableau grâce à une fonction de rappel
  • array_flip — Remplace les clés par les valeurs, et les valeurs par les clés
  • array_intersect_assoc — Calcule l'intersection de deux tableaux avec des tests sur les index
  • array_intersect_key — Calcule l'intersection de deux tableaux en utilisant les clés pour comparaison
  • array_intersect_uassoc — Calcule l'intersection de deux tableaux avec des tests sur les index, compare les index en utilisant une fonction de rappel
  • array_intersect_ukey — Calcule l'intersection de deux tableaux en utilisant une fonction de rappel sur les clés pour comparaison
  • array_intersect — Calcule l'intersection de tableaux
  • array_is_list — Vérifie si un array donné est une liste
  • array_key_exists — Vérifie si une clé existe dans un tableau
  • array_key_first — Récupère la première clé d'un tableau
  • array_key_last — Récupère la dernière clé d'un tableau
  • array_keys — Retourne toutes les clés ou un ensemble des clés d'un tableau
  • array_map — Applique une fonction sur les éléments d'un tableau
  • array_merge_recursive — Combine un ou plusieurs tableaux ensemble, récursivement
  • array_merge — Fusionne plusieurs tableaux en un seul
  • array_multisort — Trie les tableaux multidimensionnels
  • array_pad — Complète un tableau avec une valeur jusqu'à la longueur spécifiée
  • array_pop — Dépile un élément de la fin d'un tableau
  • array_product — Calcule le produit des valeurs du tableau
  • array_push — Empile un ou plusieurs éléments à la fin d'un tableau
  • array_rand — Prend une ou plusieurs clés, au hasard dans un tableau
  • array_reduce — Réduit itérativement un tableau
  • array_replace_recursive — Remplace récursivement dans le premier tableau les éléments des autres tableaux fournis
  • array_replace — Remplace les éléments d'un tableau par ceux d'autres tableaux
  • array_reverse — Inverse l'ordre des éléments d'un tableau
  • array_search — Recherche dans un tableau la première clé associée à la valeur
  • array_shift — Dépile un élément au début d'un tableau
  • array_slice — Extrait une portion de tableau
  • array_splice — Efface et remplace une portion de tableau
  • array_sum — Calcule la somme des valeurs du tableau
  • array_udiff_assoc — Calcule la différence entre des tableaux avec vérification des index, compare les données avec une fonction de rappel
  • array_udiff_uassoc — Calcule la différence de deux tableaux associatifs, compare les données et les index avec une fonction de rappel
  • array_udiff — Calcule la différence entre deux tableaux en utilisant une fonction rappel
  • array_uintersect_assoc — Calcule l'intersection de deux tableaux avec des tests sur l'index, compare les données en utilisant une fonction de rappel
  • array_uintersect_uassoc — Calcule l'intersection de deux tableaux avec des tests sur l'index, compare les données et les index des deux tableaux en utilisant une fonction de rappel séparée
  • array_uintersect — Calcule l'intersection de deux tableaux, compare les données en utilisant une fonction de rappel
  • array_unique — Dédoublonne un tableau
  • array_unshift — Empile un ou plusieurs éléments au début d'un tableau
  • array_values — Retourne toutes les valeurs d'un tableau
  • array_walk_recursive — Applique une fonction de rappel récursivement à chaque membre d'un tableau
  • array_walk — Exécute une fonction fournie par l'utilisateur sur chacun des éléments d'un tableau
  • array — Crée un tableau
  • arsort — Trie un tableau en ordre décroissant et conserve l'association des index
  • asort — Trie un tableau en ordre croissant et conserve l'association des index
  • compact — Crée un tableau à partir de variables et de leur valeur
  • count — Compte tous les éléments d'un tableau ou dans un objet Countable
  • current — Retourne l'élément courant du tableau
  • each — Retourne chaque paire clé/valeur d'un tableau
  • end — Positionne le pointeur de tableau en fin de tableau
  • extract — Importe les variables dans la table des symboles
  • in_array — Indique si une valeur appartient à un tableau
  • key_exists — Alias de array_key_exists
  • key — Retourne une clé d'un tableau associatif
  • krsort — Trie un tableau en fonction des clés en ordre décroissant
  • ksort — Trie un tableau en fonction des clés en ordre croissant
  • list — Assigne des variables comme si elles étaient un tableau
  • natcasesort — Trie un tableau avec l'algorithme à "ordre naturel" insensible à la casse
  • natsort — Trie un tableau avec l'algorithme à "ordre naturel"
  • next — Avance le pointeur interne d'un tableau
  • pos — Alias de current
  • prev — Recule le pointeur courant de tableau
  • range — Crée un tableau contenant un intervalle d'éléments
  • reset — Remet le pointeur interne de tableau au début
  • rsort — Trie un tableau en ordre décroissant
  • shuffle — Mélange les éléments d'un tableau
  • sizeof — Alias de count
  • sort — Trie un tableau en ordre croissant
  • uasort — Trie un tableau en utilisant une fonction de rappel
  • uksort — Trie un tableau par ses clés en utilisant une fonction de rappel
  • usort — Trie un tableau en utilisant une fonction de comparaison
add a note add a note

User Contributed Notes 14 notes

up
15
permanovd at gmail dot com
5 years ago
A simple trick that can help you to guess what diff/intersect or sort function does by name.

[suffix] assoc - additional index check. Compares both value and index.

Example: array_diff_assoc, array_intersect_assoc.

[suffix] key - index only check. Ignores value of array, compares only indexes.

Example: array_diff_key, array_intersect_key.

[suffix] **empty** - no "key" or "assoc" word in suffix. Compares values only. Ignores indexes of array.

Example: array_diff, array_intersect.

[prefix] u - will do comparison with user defined function. Letter u can be used twice in some functions (like array_udiff_uassoc), this means that you have to use 2 functions (one for value, one for index).

Example: array_udiff_uassoc, array_uintersect_assoc.

This also works with array sort functions:

[prefix] a - associative. Will preserve keys.

Example: arsort, asort.

[prefix] k - key sort. Will sort array by keys.

Example: uksort, ksort.

[prefix] r - reverse. Will sort array in reverse order.

Example: rsort, krsort.

[prefix] u - sort by user defined function (same as for diff/intersect).

Example: usort, uasort.
up
0
indioeuropeo at driverop dot com
4 years ago
I need to take an element from the Array and change its position within the Array by moving the rest of the elements as required.
This is the function that does it. The first parameter is the working Array. The second is the position of the element to move and the third is the position where to move the element.
The function returns the modified Array.
<?php
function array_move_elem($array, $from, $to) {
    if (
$from == $to) { return $array; }
   
$c = count($array);
    if ((
$c > $from) and ($c > $to)) {
        if (
$from < $to) {
           
$f = $array[$from];
            for (
$i = $from; $i < $to; $i++) {
               
$array[$i] = $array[$i+1];
            }
           
$array[$to] = $f;
        } else {
           
$f = $array[$from];
            for (
$i = $from; $i > $to; $i--) {
               
$array[$i] = $array[$i-1];
            }
           
$array[$to] = $f;
        }
       
    }
    return
$array;
}

?>
Examples:
<?php
$array
= array('Cero','Uno','Dos','Tres','Cuatro','Cinco','Seis','Siete','Ocho','Nueve','Diez');
$array = array_move_elem($array, 3, 5); // Move element in position 3 to position 5...
print_r($array);

$array = array_move_elem($array, 5, 3); // Move element in position 5 to position 3, leaving array as it was... ;)
print_r($array);

?>
Return:
<?php
Array ( [0] => Cero [1] => Uno [2] => Dos [3] => Cuatro [4] => Cinco [5] => Tres [6] => Seis [7] => Siete [8] => Ocho [9] => Nueve [10] => Diez )
Array ( [
0] => Cero [1] => Uno [2] => Dos [3] => Tres [4] => Cuatro [5] => Cinco [6] => Seis [7] => Siete [8] => Ocho [9] => Nueve [10] => Diez )
?>
up
-1
info at hotkey404 dot com
3 years ago
Updated code of 'indioeuropeo' with option to input string-based keys.

INPUT:
array(4) {
  ["a"]=>
  string(5) "Apple"
  ["b"]=>
  string(6) "Banana"
  ["c"]=>
  string(3) "Cat"
  ["d"]=>
  string(3) "Dog"
}

OUTPUT:
array(4) {
  ["a"]=>
  string(5) "Apple"
  ["d"]=>
  string(3) "Dog"
  ["b"]=>
  string(6) "Banana"
  ["c"]=>
  string(3) "Cat"
}

FUNCTION:
<?php
function array_move_elem($array, $from, $to){
// return if non-numeric couldn't be found or from=to
   
if(!is_numeric($from)){
        if(
array_search($from, array_keys($array))!==FALSE){
           
$from = array_search($from, array_keys($array));
        }else{
            return
$array;
        }
    }
   
$array_numeric_keys = array();
    foreach(
$array as $k => $v){
       
$array_numeric_keys[] = $k;
    }
    if (
$from == $to) { return $array; }
   
$c = count($array_numeric_keys);
    if ((
$c > $from) and ($c > $to)) {
        if (
$from < $to) {
           
$f = $array_numeric_keys[$from];
            for (
$i = $from; $i < $to; $i++) {
               
$array_numeric_keys[$i] = $array_numeric_keys[$i+1];
            }
           
$array_numeric_keys[$to] = $f;
        } else {
           
$f = $array_numeric_keys[$from];
            for (
$i = $from; $i > $to; $i--) {
               
$array_numeric_keys[$i] = $array_numeric_keys[$i-1];
            }
           
$array_numeric_keys[$to] = $f;
        }
      
    }
   
$array_new = array();
    foreach(
$array_numeric_keys as $v){
       
$array_new[$v] = $array[$v];
    }
    return
$array_new;
}
?>
up
-3
renatonascto at gmail dot com
15 years ago
Big arrays use a lot of memory possibly resulting in memory limit errors. You can reduce memory usage on your script by destroying them as soon as you´re done with them. I was able to get over a few megabytes of memory by simply destroying some variables I didn´t use anymore.
You can view the memory usage/gain by using the funcion memory_get_usage(). Hope this helps!
up
-12
ob at babcom dot biz
17 years ago
Here is a function to find out the maximum depth of a multidimensional array.

<?php
// return depth of given array
// if Array is a string ArrayDepth() will return 0
// usage: int ArrayDepth(array Array)

function ArrayDepth($Array,$DepthCount=-1,$DepthArray=array()) {
 
$DepthCount++;
  if (
is_array($Array))
    foreach (
$Array as $Key => $Value)
     
$DepthArray[]=ArrayDepth($Value,$DepthCount);
  else
    return
$DepthCount;
  foreach(
$DepthArray as $Value)
   
$Depth=$Value>$Depth?$Value:$Depth;
  return
$Depth;
}
?>
up
-18
kolkabes at googlemail dot com
11 years ago
Short function for making a recursive array copy while cloning objects on the way.

<?php
function arrayCopy( array $array ) {
       
$result = array();
        foreach(
$array as $key => $val ) {
            if(
is_array( $val ) ) {
               
$result[$key] = arrayCopy( $val );
            } elseif (
is_object( $val ) ) {
               
$result[$key] = clone $val;
            } else {
               
$result[$key] = $val;
            }
        }
        return
$result;
}
?>
up
-15
callmeanaguma at gmail dot com
11 years ago
If you need to flattern two-dismensional array with single values assoc subarrays, you could use this function:

<?php
function arrayFlatten($array) {
       
$flattern = array();
        foreach (
$array as $key => $value){
           
$new_key = array_keys($value);
           
$flattern[] = $value[$new_key[0]];
        }
        return
$flattern;
}
?>
up
-15
mo dot longman at gmail dot com
16 years ago
to 2g4wx3:
i think better way for this is using JSON, if you have such module in your PHP. See json.org.

to convert JS array to JSON string: arr.toJSONString();
to convert JSON string to PHP array: json_decode($jsonString);

You can also stringify objects, numbers, etc.
up
-16
oliverSPAMMENOT at e-geek dot com dot au
13 years ago
Function to pretty print arrays and objects. Detects object recursion and allows setting a maximum depth. Based on arraytostring and u_print_r from the print_r function notes. Should be called like so:

<?php
egvaluetostring
($value)   //no max depth, or
egvaluetostring($value, $max_depth)   //max depth set

function egvaluetostring($value, $max_depth, $key = NULL, $depth = 0, $refChain = array()) {
  if(
$depth > 0)
   
$tab = str_repeat("\t", $depth);
 
$text .= $tab . ($key !== NULL ? $key . " => " : "");
 
  if (
is_array($value) || is_object($value)) {
   
$recursion = FALSE;
    if (
is_object($value)) {
      foreach (
$refChain as $refVal) {
        if (
$refVal === $value) {
         
$recursion = TRUE;
          break;
        }
      }
     
array_push($refChain, $value);
    }
   
   
$text .= (is_array($value) ? "array" : "object") . " ( ";
   
    if (
$recursion) {
     
$text .= "*RECURSION* ";
    }
    elseif (isset(
$max_depth) && $depth >= $max_depth) {
     
$text .= "*MAX DEPTH REACHED* ";
    }
    else {
      if (!empty(
$value)) {
       
$text .= "\n";
        foreach (
$value as $child_key => $child_value) {
         
$text .= egvaluetostring($child_value, $max_depth, (is_array($value) ? "[" : "") . $child_key . (is_array($value) ? "]" : ""), $depth+1, $refChain) . ",\n";
        }
       
$text .= "\n" . $tab;
      }
    }
   
   
$text .= ")";
   
    if (
is_object($value)) {
     
array_pop($refChain);
    }
  }
  else {
   
$text .= "$value";
  }

  return
$text;
}
?>
up
-17
Ewan
7 years ago
I was looking for an array aggregation function here and ended up writing this one.

Note: This implementation assumes that none of the fields you're aggregating on contain The '@' symbol.

<?php
 
function array_group_by($flds, $arr) {
   
$groups = array();
    foreach (
$arr as $rec) {
     
$keys = array_map(function($f) use($rec) { return $rec[$f]; }, $flds);
     
$k = implode('@', $keys);
      if (isset(
$groups[$k])) {
       
$groups[$k][] = $rec;
      } else {
       
$groups[$k] = array($rec);
      }
    }
    return
$groups;
  }

?>
up
-22
dave at davidhbrown dot us
12 years ago
While PHP has well over three-score array functions, array_rotate is strangely missing as of PHP 5.3. Searching online offered several solutions, but the ones I found have defects such as inefficiently looping through the array or ignoring keys.

The following array_rotate() function uses array_merge and array_shift to reliably rotate an array forwards or backwards, preserving keys. If you know you can trust your $array to be an array and $shift to be between 0 and the length of your array, you can skip the function definition and use just the return expression in your code.

<?php
function array_rotate($array, $shift) {
    if(!
is_array($array) || !is_numeric($shift)) {
        if(!
is_array($array)) error_log(__FUNCTION__.' expects first argument to be array; '.gettype($array).' received.');
        if(!
is_numeric($shift)) error_log(__FUNCTION__.' expects second argument to be numeric; '.gettype($shift)." `$shift` received.");
        return
$array;
    }
   
$shift %= count($array); //we won't try to shift more than one array length
   
if($shift < 0) $shift += count($array);//handle negative shifts as positive
   
return array_merge(array_slice($array, $shift, NULL, true), array_slice($array, 0, $shift, true));
}
?>
A few simple tests:
<?php
$array
=array("foo"=>1,"bar"=>2,"baz"=>3,4,5);

print_r(array_rotate($array, 2));
print_r(array_rotate($array, -2));
print_r(array_rotate($array, count($array)));
print_r(array_rotate($array, "4"));
print_r(array_rotate($array, -9));
?>
up
-19
nicoolasens at gmail dot com
8 years ago
/*to change an index without rewriting the whole table and leave at the same place.
*/
<?php
function change_index(&$tableau, $old_key, $new_key) {
   
$changed = FALSE;
   
$temp = 0;
    foreach (
$tableau as $key => $value) {
        switch (
$changed) {
            case
FALSE :
               
//creates the new key and deletes the old
               
if ($key == $old_key) {
                   
$tableau[$new_key] = $tableau[$old_key];
                    unset(
$tableau[$old_key]);
                   
$changed = TRUE;
                }
                break;

            case
TRUE :
               
//moves following keys
               
if ($key != $new_key){
               
$temp= $tableau[$key];
                unset(
$tableau[$key]);
               
$tableau[$key] = $temp;
                break;
                }
                else {
$changed = FALSE;} //stop
       
}
    }
   
array_values($tableau); //free_memory
}

//Result :
$tableau = array(1, 2 , 3, 4,5, 6, 7, 8, 9, 10);
$res = print_r($tableau, TRUE);
$longueur = strlen($res) -1;
echo
"Old array :\n" . substr($res, 8, $longueur) . "\n" ;

change_index ($tableau, 2, 'number 2');
$res = print_r($tableau, TRUE);
$longueur = strlen($res) -10;
echo
"New array :\n" . substr($res, 8, $longueur) . "\n" ;

/*
Old array :
    [0] => 1
    [1] => 2
    [2] => 3
    [3] => 4
    [4] => 5
    [5] => 6
    [6] => 7
    [7] => 8
    [8] => 9
    [9] => 10
)

New array :
    [0] => 1
    [1] => 2
    [numéro 2] => 3
    [3] => 4
    [4] => 5
    [5] => 6
    [6] => 7
    [7] => 8
    [8] => 9
    [9] => 10
*/
?>
up
-14
DamianKaelGreen at gmail dot com
6 years ago
While there are a lot of array functions in the PHP libs, there also seem to be a lot of rudimentary ones missing.

I went ahead and created several of my own functions for handling multiple non-associative (na) arrays including:

na_array_merge
na_array_intersect
na_array_diff
na_array_xnor
na_array_xor

If you are using Venn diagrams to think about your arrays, then these functions might be for you.

I have made them available and posted documentation for them here: https://www.greendingle.com/some-useful-non-associative-array-functions/
up
-22
cyberchrist at futura dot net
16 years ago
Lately, dealing with databases, I've been finding myself needing to know if one array, $a, is a proper subset of $b.

Mathematically, this is asking (in set theory) [excuse the use of u and n instead of proper Unicode):

( A u B ) n ( ~ B )

What this does is it first limits to known values, then looks for anything outside of B but in the union of A and B (which would be those things in A which are not also in B).

If any value exists in this set, then A is NOT a proper subset of B, because a value exists in A but not in B.  For A to be a proper subset, all values in A must be in B.

I'm sure this could easily be done any number of ways but this seems to work for me.  It's not got a lot of error detection such as sterilizing inputs or checking input types.

// bool array_subset( array, array )
// Returns true if $a is a proper subset of $b, returns false otherwise.

function array_subset( $a, $b )
{
    if( count( array_diff( array_merge($a,$b), $b)) == 0 )
        return true;
    else
        return false;
}
To Top