vsprintf

(PHP 4 >= 4.1.0, PHP 5, PHP 7, PHP 8)

vsprintfRetourne une chaîne formatée

Description

vsprintf(string $format, array $values): string

vsprintf() fonctionne comme sprintf(), mais accepte un tableau comme argument, au lieu d'une liste d'arguments.

Liste de paramètres

format

La chaîne de format est composé de zéro ou plusieurs directives : des caractères ordinaires (à l'exception de %) qui sont copiés directement dans le résultat et des spécifications de conversion, chacun ayant pour résultat de récupérer ses propres paramètre.

Une spécification de conversion qui suit ce prototype : %[argnum$][flags][width][.precision]specifier.

Argnum

Un entier suivit d'un signe dollar $, pour spécifier quel numéro d'argument à traiter dans la conversion.

Drapeaux
Drapeau Description
- Justifie le texte à gauche donnée la largeur du champ ; Justification à droite est le comportement par défaut.
+ Préfixe les nombres positives avec un signe plus + ; Par défaut seul les nombres négatifs sont préfixés avec un signe négatif.
(espace) Complète le résultat avec des espaces. Ceci est par défaut.
0 Complète uniquement les nombres à gauches avec des zéros. Avec le spécificateur s ceci peut aussi compléter à droite avec des zéros.
'(char) Complète le résultat avec le caractère (char).

Largeur

Soit un entier indiquant le nombre de caractères (minimum) que cette conversion doit produire, soit *. Si * est utilisé, alors la largeur est fournie en tant que valeur entière supplémentaire précédant celle formatée par le spécificateur.

Precision

Un point . suivi optionnellement soit d'un entier, soit de *, dont la signification dépend du spécificateur :

  • Pour les spécificateurs e, E, f et F : ceci est le nombre de chiffres à afficher après la virgule (par défaut, ceci est 6).
  • Pour les spécificateurs g, G, h et H : ceci est le nombre maximal de chiffres significatifs à afficher. digits to be printed.
  • Pour le spécificateur s : il agit comme un point de coupure, définissant une limite maximale de caractères de la chaîne.

Note: Si le point est spécifié sans une valeur explicite pour la précision, 0 est assumé. Si * est utilisé, la précision est fournie en tant que valeur entière supplémentaire précédant celle formatée par le spécificateur.

Spécificateurs
Spécificateur Description
% Un caractère de pourcentage littéral. Aucun argument n'est nécessaire.
b L'argument est traité comme un entier et présenté comme un nombre binaire.
c L'argument est traité comme un entier et présenté comme le caractère de code ASCII correspondant.
d L'argument est traité comme un entier et présenté comme un nombre entier décimal (signé).
e L'argument est traité comme une notation scientifique (e.g. 1.2e+2).
E Comme le spécificateur e mais utilise une lettre majuscule (par exemple 1.2E+2).
f L'argument est traité comme un nombre à virgule flottante (type nombre décimal) et présenté comme un nombre à virgule flottante (tenant compte de la locale utilisée).
F L'argument est traité comme un nombre à virgule flottante (type nombre décimal) et présenté comme un nombre à virgule flottante (ne tenant pas compte de la locale utilisée).
g

Format général.

Soit P égal à la précision si différent de 0, 6 si la précision est omit ou 1 si la précision est zéro. Alors, si la conversion avec le style E aurait comme exposant X :

Si P > X ≥ −4, la conversion est avec style f et précision P − (X + 1). Sinon, la conversion est avec le style e et précision P - 1.

G Comme le spécificateur g mais utilise E et f.
h Comme le spécificateur g mais utilise F. Disponible à partir de PHP 8.0.0.
H Comme le spécificateur g mais utilise E et F. Disponible à partir de PHP 8.0.0.
o L'argument est traité comme un entier et présenté comme un nombre octal.
s L'argument est traité et présenté comme une chaîne de caractères.
u L'argument est traité comme un entier et présenté comme un nombre décimal non signé.
x L'argument est traité comme un entier et présenté comme un nombre hexadécimal (les lettres en minuscules).
X L'argument est traité comme un entier et présenté comme un nombre hexadécimal (les lettres en majuscules).

Avertissement

Le spécificateur de type c ignore l'alignement et la taille.

Avertissement

Le fait de tenter d'utiliser une combinaison d'une chaîne et de spécificateurs avec des jeux de caractères qui nécessitent plus d'un octet par caractères donnera un résultat inattendu.

Les variables seront contraints à un type approprié pour le spécificateur :

Gestion des types
Type Spécificateurs
string s
int d, u, c, o, x, X, b
float e, E, f, F, g, G, h, H

values

Valeurs de retour

Retourne une chaîne formatée à partir du tableau de valeurs values, et en utilisant le format format.

Erreurs / Exceptions

As of PHP 8.0.0, a ValueError is thrown if the number of arguments is zero. Prior to PHP 8.0.0, a E_WARNING was emitted instead.

As of PHP 8.0.0, a ValueError is thrown if [width] is less than zero or bigger than PHP_INT_MAX. Prior to PHP 8.0.0, a E_WARNING was emitted instead.

As of PHP 8.0.0, a ValueError is thrown if [precision] is less than zero or bigger than PHP_INT_MAX. Prior to PHP 8.0.0, a E_WARNING was emitted instead.

As of PHP 8.0.0, a ValueError is thrown when less arguments are given than required. Prior to PHP 8.0.0, false was returned and a E_WARNING emitted instead.

Historique

Version Description
8.0.0 Cette fonction ne renvoie plus false en cas d'échec.
8.0.0 Lance une ValueError si le nombre d'arguments est zéro ; auparavant, cette fonction émettait un E_WARNING.
8.0.0 Lance une ValueError si [width] est inférieur à zéro ou supérieur à PHP_INT_MAX ; auparavant, cette fonction émettait un E_WARNING.
8.0.0 Lance une ValueError si [precision] est inférieur à zéro ou supérieur à PHP_INT_MAX ; auparavant, cette fonction émettait un E_WARNING.
8.0.0 Lance une ArgumentCountError lorsque moins d'arguments sont donnés que requis ; auparavant, cette fonction émettait un E_WARNING.

Exemples

Exemple #1 Exemple avec vsprintf() : entiers avec zéro initiaux

<?php
print vsprintf("%04d-%02d-%02d", explode('-', '1988-8-1'));
?>

L'exemple ci-dessus va afficher :

1988-08-01

Voir aussi

  • printf() - Affiche une chaîne de caractères formatée
  • sprintf() - Retourne une chaîne formatée
  • fprintf() - Écrit une chaîne formatée dans un flux
  • vprintf() - Affiche une chaîne formatée
  • vfprintf() - Écrit une chaîne formatée dans un flux
  • sscanf() - Analyse une chaîne à l'aide d'un format
  • fscanf() - Analyse un fichier en fonction d'un format
  • number_format() - Formate un nombre pour l'affichage
  • date() - Formate un horodatage Unix

add a note add a note

User Contributed Notes 16 notes

up
35
spectrumcat
7 years ago
Instead of inventing own functions in case you'd like to use array keys as placeholder names and replace corresponding array values in a string, just use the str_replace:

$string = 'Hello %name!';
$data = array(
  '%name' => 'John'
);

$greeting = str_replace(array_keys($data), array_values($data), $string);
up
14
Josef Kufner
11 years ago
<?php
/**
* Like vsprintf, but accepts $args keys instead of order index.
* Both numeric and strings matching /[a-zA-Z0-9_-]+/ are allowed.
*
* Example: vskprintf('y = %y$d, x = %x$1.1f', array('x' => 1, 'y' => 2))
* Result:  'y = 2, x = 1.0'
*
* $args also can be object, then it's properties are retrieved
* using get_object_vars().
*
* '%s' without argument name works fine too. Everything vsprintf() can do
* is supported.
*
* @author Josef Kufner <jkufner(at)gmail.com>
*/
function vksprintf($str, $args)
{
    if (
is_object($args)) {
       
$args = get_object_vars($args);
    }
   
$map = array_flip(array_keys($args));
   
$new_str = preg_replace_callback('/(^|[^%])%([a-zA-Z0-9_-]+)\$/',
            function(
$m) use ($map) { return $m[1].'%'.($map[$m[2]] + 1).'$'; },
           
$str);
    return
vsprintf($new_str, $args);
}
?>
up
4
Roadster
17 years ago
Please note: The same functionality (sortof) can be attained between version 4.0.4 and 4.1.0 using call_user_func_array.

Example:

call_user_func_array("sprintf", $arg)

First element of $arg is the format. This rescued me in a situation where version 4.1.0 wasn't available.
up
3
jon at ardentcreative dot co dot uk
18 years ago
This can be used for quick and dirty internationalization:

<?php
$GLOBALS
['strings']['example'] = "There are %d people.";

// Loads a phrase from the translations list in lang/$lang/phrases.php
function t() {
   
$args = func_get_args();
   
$nArgs = func_num_args();
   
   
$phrase = array_shift($args);
   
$nArgs--;
   
    include_once(
"../lang/" . lang() . "/phrases.php");
    if (isset(
$GLOBALS['strings'][$phrase])) {
        return
vsprintf($GLOBALS['strings'][$phrase], $args);
    } else {
        return
'<span style="color: #ff0000">Untranslated string: ' . $phrase . '</span>';
    }
}
?>
up
2
jed at NOSPAM dot jed dot bz
19 years ago
vsprintf() accepts arrays with any keys, so the array_shift() technique is unnecessary when writing a printf-type function. Any parameters you require are easily unset from the array you retrieve with func_get_args():

<?php

function mysprintf($format) {
   
$args = func_get_args();
    unset(
$args[0]); /* get rid of "$format" */
   
return vsprintf($format, $args);
}

/* I use this technique in production code as follows: */
function logf($target, $string) {
   
$args = func_get_args();
    unset(
$args[0], $args[1]);
   
fprintf($GLOBALS['config']['logtargets'][$target],
       
"[%s] %s\n", date('H:i'), wordwrap(vsprintf($string, $args), 75, '\n\r '));
}

/* e.g.:
    logf(DEBUG, "Oops! %s", mysql_error());
*/

?>

array_shift() and other costly array operations aren't required, as far as I know. I could be wrong.
up
3
www dot wesley at gmail dot com
15 years ago
vnsprintf is equal to vsprintf except for associative, signed or floating keys.

vnsprintf supports for example "%assocKey$05d", "%-2$'+10s" and "%3.2$05u", vsprintf doesn't

vnsprintf( '%2$d', $array) [2nd value] is equal to vsprintf( '%2$d', $array) [2nd value]
vnsprintf( '%+2$d', $array) [key = 2] is equal to vnsprintf( '%2.0$d', $array) [key = 2]
vnsprintf( '%+2$d', $array) [key = 2] is different of vsprintf( '%+2$d', $array) [unsupported]

When you use signed or floating keys, vnsprintf searchs for the signed truncated key of the original array

Note¹: vnsprintf does not support for example "%someKeyf" (floating number, key = someKey) or "%+03d" (signed decimal number, key = 3), you should use "%someKey$f" or "%+03$d" respectively.
Note²: "%+03d" (or "%1$+03d") will be interpreted as signed zero-padded decimal number

<?php
function vnsprintf( $format, array $data)
{
   
preg_match_all( '/ (?<!%) % ( (?: [[:alpha:]_-][[:alnum:]_-]* | ([-+])? [0-9]+ (?(2) (?:\.[0-9]+)? | \.[0-9]+ ) ) ) \$ [-+]? \'? .? -? [0-9]* (\.[0-9]+)? \w/x', $format, $match, PREG_SET_ORDER | PREG_OFFSET_CAPTURE);
   
$offset = 0;
   
$keys = array_keys($data);
    foreach (
$match as &$value )
    {
        if ( (
$key = array_search( $value[1][0], $keys) ) !== FALSE || ( is_numeric( $value[1][0]) && ( $key = array_search( (int)$value[1][0], $keys) ) !== FALSE ) ) {
           
$len = strlen( $value[1][0]);
           
$format = substr_replace( $format, 1 + $key, $offset + $value[1][1], $len);
           
$offset -= $len - strlen( $key);
        }
    }
    return
vsprintf( $format, $data);
}

$examples = array(
   
2.8=>'positiveFloat',    // key = 2 , 1st value
   
-3=>'negativeInteger',    // key = -3 , 2nd value
   
'my_name'=>'someString'    // key = my_name , 3rd value
);

echo
vsprintf( "%%my_name\$s = '%my_name\$s'\n", $examples);    // [unsupported]
echo vnsprintf( "%%my_name\$s = '%my_name\$s'\n", $examples);    // output : "someString"

echo vsprintf( "%%2.5\$s = '%2.5\$s'\n", $examples);        // [unsupported]
echo vnsprintf( "%%2.5\$s = '%2.5\$s'\n", $examples);        // output : "positiveFloat"

echo vsprintf( "%%+2.5\$s = '%+2.5\$s'\n", $examples);        // [unsupported]
echo vnsprintf( "%%+2.5\$s = '%+2.5\$s'\n", $examples);        // output : "positiveFloat"

echo vsprintf( "%%-3.2\$s = '%-3.2\$s'\n", $examples);        // [unsupported]
echo vnsprintf( "%%-3.2\$s = '%-3.2\$s'\n", $examples);        // output : "negativeInteger"

echo vsprintf( "%%2\$s = '%2\$s'\n", $examples);            // output : "negativeInteger"
echo vnsprintf( "%%2\$s = '%2\$s'\n", $examples);            // output : [= vsprintf]

echo vsprintf( "%%+2\$s = '%+2\$s'\n", $examples);        // [unsupported]
echo vnsprintf( "%%+2\$s = '%+2\$s'\n", $examples);        // output : "positiveFloat"

echo vsprintf( "%%-3\$s = '%-3\$s'\n", $examples);        // [unsupported]
echo vnsprintf( "%%-3\$s = '%-3\$s'\n", $examples);        // output : "negativeInteger"
?>
up
2
dee jay simple zero07 at geemail dawt co
11 years ago
Using a heredoc with vprintf:

<?php
$string
= <<<THESTRING
I like the state of %1\$s <br />
I picked: %2\$d as a number, <br />
I also picked %2\$d as a number again <br />
%3\$s<br />
THESTRING;

$returnText = vprintf$string, array('Oregon','7','I Love Oregon')  );

echo
$returnText;
?>
up
2
steven at nevvix dot com
5 years ago
<?php
/**
* Return a formatted string like vsprintf() with named placeholders.
*
* When a placeholder doesn't have a matching key in `$args`,
*   the placeholder is returned as is to see missing args.
* @param string $format
* @param array $args
* @param string $pattern
* @return string
*/
function p($format, array $args, $pattern="/\{(\w+)\}/") {
    return
preg_replace_callback($pattern, function ($matches) use ($args) {
        return @
$args[$matches[1]] ?: $matches[0];
    },
$format);
}

$args = ["database"=>"people", "user"=>"staff", "pass"=>"pass123", "host"=>"localhost"];

// With PHP-like placeholders: the variable is embedded in a string "{$database}" but without the dollar sign
$format = <<<SQL
CREATE DATABASE IF NOT EXISTS {database};
GRANT ALL PRIVILEGES ON {database_name}.* TO '{user}'@'{host}';
SET PASSWORD = PASSWORD('{pass}');
SQL;
echo
p($format, $args);
/*
Result:

CREATE DATABASE IF NOT EXISTS people;
GRANT ALL PRIVILEGES ON {database_name}.* TO 'staff'@'localhost';
SET PASSWORD = PASSWORD('pass123');

The `{database_name}` placeholder doesn't exist as a matching key in `$args` so it's returned as is.
*/

// With Ruby-like placeholders
$format = <<<SQL
CREATE DATABASE IF NOT EXISTS :database;
GRANT ALL PRIVILEGES ON :database_name.* TO ':user'@':host';
SET PASSWORD = PASSWORD(':pass');
SQL;
echo
p($format, $args, "/:(\w+)/");
/*
Result:

CREATE DATABASE IF NOT EXISTS people;
GRANT ALL PRIVILEGES ON :database_name.* TO 'staff'@'localhost';
SET PASSWORD = PASSWORD('pass123');

The `:database_name` placeholder doesn't exist as a matching key in `$args` so it's returned as is.
*/
up
1
ASchmidt at Anamera dot net
6 years ago
It's necessary to clearly how to apply argument swapping when using an array of arguments. One might be tempted to use %0$ to reference $args[0].

In reality, the position specifier is always the array index+1:

$args[0]  is referenced by %1$...
$args[1]  is referenced by %2$...
etc.

Similarly, the first subpattern of a RegEx match would be found in $matches[1], the second in $match[2], etc. However if the $matches array is used as arguments to vsprint(), then the position specifier is subpattern+1:

preg_match( $pattern, $subject, $matches );
vsprintf( 'Full Match = %1$s, first Subpattern = %2$s, second Subpattern = %3$s', $matches );
up
0
crash
2 years ago
Note that this function now throws an ValueError* as of PHP 8.0 if there is an error:

$ php -r 'var_dump(vsprintf("%d", []));'
> Fatal error: Uncaught ValueError: The arguments array must contain 1 items, 0 given in Command line code:1

*ValueError is new in PHP 8.0, so if you want to make your code compatible to PHP 7.x you should test that the arguments array has the correct length.
up
0
samviseNOSPAM at hobbitonNOSPAM dot it
21 years ago
i wrote a short function that make use of vsprintf. It is useful in first coding/debugging of php scripts, because it is called like a simple printf and it display in italic (you can change it of course ;-) ) every debug messages, making it easy to remove them when your code is ready.

here goes :

<?php
function printd() {
       
$debug_array=func_get_args();
       
$debug_numargs=func_num_args();
       
$debug_fmt=$debug_array[0];
        for (
$i = 0 ; $i < $debug_numargs ; $i++ )
               
$debug_array[$i] = $debug_array[$i+1];
       
$debug_text=vsprintf($debug_fmt, $debug_array);
       
printf("--> debug <i>%s</i>\n",
               
$debug_text);
}
?>
up
-1
strata_ranger at hotmail dot com
13 years ago
Here's a simple variation on vsprintf() suitable for use with database queries where the results were retrieved as an associative array keyed by column names.

<?php

function dbsprintf($format, $fields, $row)
// $format - sprintf() compatible format string
// $row - Array containing key/value pairs of data
// $fields - Array containing key names (from $row) that are to be used as arguments
{
 
// Loop through $fields and insert the corresponding values from $row
 
foreach($fields as &$value)
  {
   
$value = $row[$value];
  } unset(
$value);
 
 
// Format the string and return
 
return vsprintf($format, $fields);
}

// Some data
$row = Array('id' => '12', 'name' => 'World');

// Outputs "Hello World!"
echo dbsprintf('Hello, %s!', Array('name'), $row);
// Outputs "Hello 12!"
echo dbsprintf('Hello, %s!', Array('id'), $row);

?>
up
-2
tbS dot P dot A dot M at S dot U dot K dot Staylorbarstow dot com
19 years ago
Simple but useful routine:

<?php
function vsprintf_iter($fmt,$data) {
    if (!
is_array($data)) return false;
   
$ret = '';
    foreach (
$data as $d) {
       
$ret .= vsprintf($fmt,$d);
    }
    return
$ret;
}
?>
up
-2
jeppe dot dyrby at gmail dot com
15 years ago
Heres a new version of the vnsprintf function, i call it dsprintf, but that should matter.

<?php
function dsprintf() {
 
$data = func_get_args(); // get all the arguments
 
$string = array_shift($data); // the string is the first one
 
if (is_array(func_get_arg(1))) { // if the second one is an array, use that
   
$data = func_get_arg(1);
  }
 
$used_keys = array();
 
// get the matches, and feed them to our function
 
$string = preg_replace('/\%\((.*?)\)(.)/e',
   
'dsprintfMatch(\'$1\',\'$2\',\$data,$used_keys)',$string);
 
$data = array_diff_key($data,$used_keys); // diff the data with the used_keys
 
return vsprintf($string,$data); // yeah!
}

function
dsprintfMatch($m1,$m2,&$data,&$used_keys) {
  if (isset(
$data[$m1])) { // if the key is there
   
$str = $data[$m1];
   
$used_keys[$m1] = $m1; // dont unset it, it can be used multiple times
   
return sprintf("%".$m2,$str); // sprintf the string, so %s, or %d works like it should
 
} else {
    return
"%".$m2; // else, return a regular %s, or %d or whatever is used
 
}
}
$str = "Hello, %(place)s, how is it hanning at %(place)s? %s works just as well";
$find = array(
 
'place' => 'world',
 
'sprintf',
 
'not used'
);
echo
dsprintf($str, $find);
// 'Hello, world, how is it hanning at world? sprintf works just as well'
?>
up
-4
toneee at g mail dot com
18 years ago
I found this function to be useful for formatting sql queries.

I do something like this:

function sql_build($template, $params = array()) {
  global $sql_templates;
  if (isset($sql_templates[$template])) {
    $sql = vsprintf($sql_templates[$template], $params);
    return $sql;
  }
  return false;
}

// Fetch list of contacts, for a given section id
$sql_templates['contacts_by_section'] = <<<ENDSQL
select
  id,
  name,
  email, 
  address,
  photo_id
from
  contacts
where
  section_id = %d
ENDSQL;

You also give yourself an added layer of security on the sql due to the sprintf formatting. For example, using %d will not allow any sql injection for that parameter.
up
-6
thomas att familie dash flori dot de
11 years ago
Here is my example for named placeholders. It uses python like named placeholders except that it only allows /[a-z][a-zA-Z0-9_]/ for names.

<?php

/**
* Returns a formatted string. Accepts named arguments.
* @param string $format
* @param array $args
* @return string
**/
function vsprintfn($format, $args) {
   
// search format patterns
   
preg_match_all('/((?:^|[^%])(?:%%)*)%(\([a-z][a-zA-Z0-9_]*\))?((\+|-)?(0| |\'.)?-?[0-9\.]*[bcdeEufFgGosxX])/', $format, $matches);
   
// determine the order of the arguments
   
$j = 0;
   
$order = array();
    foreach (
$matches[0] as $i => $match) {
        if (
$matches[2][$i] == '') {
           
$key = $j++;
        } else {
           
$key = substr($matches[2][$i],1,-1);
        }
       
$order[] = $key;
    }
   
// prepare the data array for vsprintf in the given order
   
$data = array();
    foreach (
$order as $key) {
        if (isset(
$args[$key])) {
           
$data[] = $args[$key];
        }
    }
   
// replace named format patterns with default format patterns
   
$format = preg_replace('/((?:^|[^%])(?:%%)*)%(\([a-z][a-zA-Z0-9_]*\))((\+|-)?(0| |\'.)?-?[0-9\.]*[bcdeEufFgGosxX])/', '$1%$3', $format);
   
// return formatted string
   
return vsprintf($format, $data);
}

$exampleData = array(0=>2.2314123123,'test'=>2.1234883);
echo
vsprintfn('%%2.5f = %2.5f', $exampleData) . "\n";
echo
vsprintfn('%%(test)09.5f = %(test)\'%9.5f', $exampleData) . "\n";

?>
To Top