ftp_nb_put

(PHP 4 >= 4.3.0, PHP 5, PHP 7, PHP 8)

ftp_nb_putEnvoie un fichier sur un serveur FTP (non-bloquant)

Description

ftp_nb_put(
    FTP\Connection $ftp,
    string $remote_filename,
    string $local_filename,
    int $mode = FTP_BINARY,
    int $offset = 0
): int|false

ftp_nb_put() écrit le fichier remote_filename présent sur la machine locale, sur le serveur FTP ftp.

La différence entre cette fonction et ftp_put() est que cette fonction peut lire le fichier de manière asynchrone, afin que votre programme fasse autre chose pendant que le fichier soit téléchargé.

Liste de paramètres

ftp

Une instance de FTP\Connection.

remote_filename

Le chemin vers le fichier distant.

local_filename

Le chemin vers le fichier local.

mode

Le mode de transfert. Doit être soit FTP_ASCII, soit FTP_BINARY.

offset

La position dans le fichier distant à partir de laquelle le téléchargement commencera.

Valeurs de retour

Retourne FTP_FAILED, FTP_FINISHED ou FTP_MOREDATA, ou false en cas d'échec de l'ouverture du fichier local.

Historique

Version Description
8.1.0 La paramètre ftp attend désormais une instance de FTP\Connection ; auparavant, une ressource était attendu.
7.3.0 Le paramètre mode est maintenant optionel. Précédemment il était obligatoire.

Exemples

Exemple #1 Exemple avec ftp_nb_put()

<?php

// Initialisation du chargement
$ret = ftp_nb_put($ftp, "test.remote", "test.local", FTP_BINARY);
while (
$ret == FTP_MOREDATA) {

// Faites ce que vous voulez...
echo ".";

// Continue le chargement...
$ret = ftp_nb_continue($ftp);
}
if (
$ret != FTP_FINISHED) {
echo
"Il y a eu un problème lors du chargement du fichier...";
exit(
1);
}
?>

Exemple #2 Reprise d'un chargement avec ftp_nb_put()

<?php

// Initialisation
$ret = ftp_nb_put($ftp, "test.remote", "test.local",
FTP_BINARY, ftp_size("test.remote"));
// Ou : $ret = ftp_nb_put($ftp, "test.remote", "test.local",
// FTP_BINARY, FTP_AUTORESUME);

while ($ret == FTP_MOREDATA) {

// Faites ce que vous voulez...
echo ".";

// Continue le chargement...
$ret = ftp_nb_continue($ftp);
}
if (
$ret != FTP_FINISHED) {
echo
"Il y a eu un problème lors du chargement...";
exit(
1);
}
?>

Voir aussi

  • ftp_nb_fput() - Écrit un fichier sur un serveur FTP, et le lit depuis un fichier (non bloquant)
  • ftp_nb_continue() - Reprend le téléchargement d'un fichier (non bloquant)
  • ftp_put() - Charge un fichier sur un serveur FTP
  • ftp_fput() - Téléverse un fichier sur un serveur FTP

add a note add a note

User Contributed Notes 7 notes

up
3
manu at manux dot org
19 years ago
When using non blocking functions if you try to disconnect while your non blocking operation is in progress the disconnect command will not work until the operation is not finished.
up
3
Ariel asphp at dsgml dot com
17 years ago
Don't add a sleep() inside the loop. If you do you will severely slow down the upload.

In my tests, each time through the loop it send about 2.5K, looping about 220 times per second. (Which is very little.)

You won't necessarily get the same numbers as me per loop, but clearly PHP does it's own management of the loop so that you don't consume all the CPU on the server.
up
2
ted at hostleft dot com
19 years ago
If you receive an error like: 

Warning:  ftp_nb_put(): Unable to service PORT commands in /path/to/file.php on line 27

verify whether you need to be in PASV mode. You can go into PASV mode by declaring

>  ftp_pasv($cnx,TRUE);
up
0
WebSee.ru
14 years ago
How to realize the possibility of transferring data from one FTP-server to another via FXP:

<?php
// ...

$ansver = ftp_raw($ftp_conn1, 'PASV');

if (
intval($ansver[0]) == 227) {
   
ftp_raw($ftp_conn2, 'PORT '.substr($ansver[0], $n = strpos($ansver[0], '(') + 1, strpos($m[0], ')', $n) - $n));
   
ftp_raw($ftp_conn1, 'STOR '.$filename); // need asynchronously (non-blocking)
   
ftp_raw($ftp_conn2, 'RETR '.$filename);
}
?>
up
0
brandon dot farber at gmail dot com
18 years ago
I couldn't see this noted anywhere...

ftp_nb_put apparently takes a much much longer time to upload the file than ftp_put (I haven't done any packet sniffing or logging tests to find out why).  I was using a script, nearly identical to the example above, and a 100KB file had only uploaded 3.99KB after about 8 minutes!  The php script naturally timed out before it was complete.

I changed my function to use ftp_put, got rid of the loop to check FTP_MOREDATA (as you will see in the example above), and the same script uploaded 2.2MB within 30 seconds with no other changes.

If you're using this function instead of ftp_put *purely to try to speed up your script* and it's taking a long time, you might want to try ftp_put instead.
up
-1
kaiohken1982 at hotmail dot com
17 years ago
Hi,
I tried to use both ftp_put() and ftp_nb_put() adding the
variable $start = date("Y:m:d h:i:s"); at the begin of the script and the variable $end = date("Y:m:d h:i:s"); at its end, after the file upload function.
With the gprs connection I'm now using and trying to upload a .jpg file of 67,5 kb the time difference between $start and $end was 40 seconds in both cases, so I can suppose that there is no difference between these upload function.
The difference comes if you put anything inside the while ($ftp_upload == FTP_MOREDATA) loop.
I hope this note can help.
Regards
up
-5
parasc at chetu dot com
5 years ago
Hi Everybody,
ftp_put not working in client server, but it working properly on my local  system.
Issue on client server:
Production.ERROR: ftp_put(): I won't open a connection to 172.31.17.181 (only to 52.33.186.63).

My script upload a file from local system to remote server.

Thanks
Paras Chauhan
To Top