crc32

(PHP 4 >= 4.0.1, PHP 5, PHP 7, PHP 8)

crc32Calcule la somme de contrôle CRC32

Description

crc32(string $string): int

Génère la somme de contrôle cyclique CRC32, calculée sur 32 bits, et appliquée à la chaîne string. Cette fonction est généralement utilisée pour valider l'intégrité de données durant une transmission.

Avertissement

En raison du fait que le type entier de PHP est signé, la plupart des sommes de contrôle crc32 se trouve être des entiers négatifs sur les plateformes 32bits. Sur des installations 64bits, tous les résultats de la fonction crc32() seront des entiers positifs.

Aussi, vous devez utiliser le formatteur "%u" de la fonction sprintf() ou de la fonction printf() pour récupérer une représentation en chaîne de caractères de la somme de contrôle non-signée de la fonction crc32() au format décimal.

Pour une représentation hexadécimale de la somme de contrôle, vous pouvez utiliser soit le formatteur "%x" de la fonction sprintf() ou de la fonction printf() , ou bien les fonctions de conversion dechex(), les deux solutions prennent soin de convertir le résultat de la fonction crc32() en un entier non-signé.

Sur les installations 64bits, la fonction retournera aussi des entiers négatifs pour des valeurs retournées très grandes, mais cela va casser la conversion en hexadécimal en ayant une position 0xFFFFFFFF######## supplémentaire. Sachant que la représentation décimale semble être le cas le plus largement utilisé, nous avons décidé de ne pas la casser même si elle casse directement la comparaison décimale dans 50% des cas lors d'un passage de 32 à 64bits.

Avec du recul, le fait que la fonction retourne un entier n'était peut-être pas la meilleure idée, et retourner dès le début une représentation hexadécimale sous la forme d'une chaîne de caractères (tel que le fait la fonction md5()), aurait été meilleure solution.

Pour une solution plus pérenne, vous pouvez vous retourner vers la fonction générique hash(). hash("crc32b", $str) va retourner la même chaîne de caractères que str_pad(dechex(crc32($str)), 8, '0', STR_PAD_LEFT).

Liste de paramètres

string

Les données.

Valeurs de retour

Retourne la somme de contrôle crc32 de la chaîne string, sous la forme d'un entier.

Exemples

Exemple #1 Afficher une somme de contrôle CRC32

Cet exemple illustre comment afficher la somme de contrôle avec la fonction printf() :

<?php
$checksum
= crc32("Le vif zéphyr jubile sur les kumquats du clown gracieux.");
printf("%u\n", $checksum);
?>

Voir aussi

  • hash() - Génère une valeur de hachage (empreinte numérique)
  • md5() - Calcule le md5 d'une chaîne
  • sha1() - Calcule le sha1 d'une chaîne de caractères

add a note add a note

User Contributed Notes 23 notes

up
21
jian at theorchard dot com
14 years ago
This function returns an unsigned integer from a 64-bit Linux platform.  It does return the signed integer from other 32-bit platforms even a 64-bit Windows one.

The reason is because the two constants PHP_INT_SIZE and PHP_INT_MAX have different values on the 64-bit Linux platform.

I've created a work-around function to handle this situation.

<?php
function get_signed_int($in) {
   
$int_max = pow(2, 31)-1;
    if (
$in > $int_max){
       
$out = $in - $int_max * 2 - 2;
    }
    else {
       
$out = $in;
    }
    return
$out;
}
?>

Hope this helps.
up
11
i at morfi dot ru
11 years ago
Implementation crc64() in php 64bit

<?php

/**
* @return array
*/
function crc64Table()
{
   
$crc64tab = [];

   
// ECMA polynomial
   
$poly64rev = (0xC96C5795 << 32) | 0xD7870F42;

   
// ISO polynomial
    // $poly64rev = (0xD8 << 56);

   
for ($i = 0; $i < 256; $i++)
    {
        for (
$part = $i, $bit = 0; $bit < 8; $bit++) {
            if (
$part & 1) {
               
$part = (($part >> 1) & ~(0x8 << 60)) ^ $poly64rev;
            } else {
               
$part = ($part >> 1) & ~(0x8 << 60);
            }
        }

      
$crc64tab[$i] = $part;
    }

    return
$crc64tab;
}

/**
* @param string $string
* @param string $format
* @return mixed
*
* Formats:
*  crc64('php'); // afe4e823e7cef190
*  crc64('php', '0x%x'); // 0xafe4e823e7cef190
*  crc64('php', '0x%X'); // 0xAFE4E823E7CEF190
*  crc64('php', '%d'); // -5772233581471534704 signed int
*  crc64('php', '%u'); // 12674510492238016912 unsigned int
*/
function crc64($string, $format = '%x')
{
    static
$crc64tab;

    if (
$crc64tab === null) {
       
$crc64tab = crc64Table();
    }

   
$crc = 0;

    for (
$i = 0; $i < strlen($string); $i++) {
       
$crc = $crc64tab[($crc ^ ord($string[$i])) & 0xff] ^ (($crc >> 8) & ~(0xff << 56));
    }

    return
sprintf($format, $crc);
}
up
9
JS at JavsSys dot Org
10 years ago
The khash() function by sukitsupaluk has two problems, it does not use all 62 characters from the $map set and when corrected it then produces different results on 64-bit compared to 32-bit PHP systems.

Here is my modified version :

<?php

/**
* Small sample convert crc32 to character map
* Based upon http://www.php.net/manual/en/function.crc32.php#105703
* (Modified to now use all characters from $map)
* (Modified to be 32-bit PHP safe)
*/
function khash($data)
{
    static
$map = "0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ";
   
$hash = bcadd(sprintf('%u',crc32($data)) , 0x100000000);
   
$str = "";
    do
    {
       
$str = $map[bcmod($hash, 62) ] . $str;
       
$hash = bcdiv($hash, 62);
    }
    while (
$hash >= 1);
    return
$str;
}
//-----------------------------------------------------------------------------------
$test = array(null, true, false, 0, "0", 1, "1", "2", "3", "ab", "abc", "abcd",
   
"abcde", "abcdefoo", "248840027", "1365848013", // time()
   
"9223372035488927794", // PHP_INT_MAX-time()
   
"901131979", // mt_rand()
   
"Sat, 13 Apr 2013 10:13:33 +0000" // gmdate('r')
);
$out = array();
foreach (
$test as $s)
{
   
$out[] = khash($s) . ": " . $s;
}
print
"<h3>khash() -- maps a crc32 result into a (62-character) result</h3>";
print
'<pre>';
var_dump($out);
print
"\n\n\$GLOBALS['raw_crc32']:\n";
var_dump($GLOBALS['raw_crc32']);
print
'</pre><hr>';
flush();
$pefile = __FILE__;
print
"<h3>$pefile</h3>";
ob_end_flush();
flush();
highlight_file($pefile);
print
"<hr>";
//-----------------------------------------------------------------------------------
/* CURRENT output
array(19) {
  [0]=>
  string(8) "4GFfc4: "
  [1]=>
  string(9) "76nO4L: 1"
  [2]=>
  string(8) "4GFfc4: "
  [3]=>
  string(9) "9aGcIp: 0"
  [4]=>
  string(9) "9aGcIp: 0"
  [5]=>
  string(9) "76nO4L: 1"
  [6]=>
  string(9) "76nO4L: 1"
  [7]=>
  string(9) "5b8iNn: 2"
  [8]=>
  string(9) "6HmfFN: 3"
  [9]=>
  string(10) "7ADPD7: ab"
  [10]=>
  string(11) "5F0aUq: abc"
  [11]=>
  string(12) "92kWw9: abcd"
  [12]=>
  string(13) "78hcpf: abcde"
  [13]=>
  string(16) "9eBVPB: abcdefoo"
  [14]=>
  string(17) "5TjOuZ: 248840027"
  [15]=>
  string(18) "5eNliI: 1365848013"
  [16]=>
  string(27) "4Q00e5: 9223372035488927794"
  [17]=>
  string(17) "6DUX8V: 901131979"
  [18]=>
  string(39) "5i2aOW: Sat, 13 Apr 2013 10:13:33 +0000"
}
*/
//-----------------------------------------------------------------------------------

?>
up
7
slimshady451
16 years ago
I see a lot of function for crc32_file, but for php version >= 5.1.2 don't forget you can use this :

<?php
function crc32_file($filename)
{
    return
hash_file ('CRC32', $filename , FALSE );
}
?>

Using crc32(file_get_contents($filename)) will use too many memory on big file so don't use it.
up
3
Clifford dot ct at gmail dot com
11 years ago
The crc32() function can return a signed integer in certain environments.  Assuming that it will always return an unsigned integer is not portable.

Depending on your desired behavior, you should probably use sprintf() on the result or the generic hash() instead.  Also note that integer arithmetic operators do not have the precision to work correctly with the integer output.
up
7
Bulk at bulksplace dot com
18 years ago
A faster way I've found to return CRC values of larger files, is instead of using the file()/implode() method used below, is to us file_get_contents() (PHP 4 >= 4.3.0) which uses memory mapping techniques if supported by your OS to enhance performance. Here's my example function:

<?php
// $file is the path to the file you want to check.
function file_crc($file)
{
   
$file_string = file_get_contents($file);

   
$crc = crc32($file_string);
   
    return
sprintf("%u", $crc);
}

$file_to_crc = /home/path/to/file.jpg;

echo
file_crc($file_to_crc); // Outputs CRC value for given file.
?>

I've found in testing this method is MUCH faster for larger binary files.
up
2
chernyshevsky at hotmail dot com
13 years ago
The crc32_combine() function provided by petteri at qred dot fi has a bug that causes an infinite loop, a shift operation on a 32-bit signed int might never reach zero. Replacing the function gf2_matrix_times() with the following seems to fix it:

<?php
function gf2_matrix_times($mat, $vec)
{
   
$sum=0;
   
$i=0;

    while (
$vec) {
        if (
$vec & 1) {
           
$sum ^= $mat[$i];
        }
       
$vec = ($vec >> 1) & 0x7FFFFFFF;
       
$i++;      
    }
    return
$sum;
}
?>

Otherwise, it's probably the best solution if you can't use hash_file(). Using a 1meg read buffer, the function only takes twice as long to process a 300meg files than hash_file() in my test.
up
3
arachnid at notdot dot net
19 years ago
Note that the CRC32 algorithm should NOT be used for cryptographic purposes, or in situations where a hostile/untrusted user is involved, as it is far too easy to generate a hash collision for CRC32 (two different binary strings that have the same CRC32 hash). Instead consider SHA-1 or MD5.
up
2
berna (at) gensis (dot) com (dot) br
14 years ago
For those who want a more familiar return value for the function:

<?php
function strcrc32($text) {
 
$crc = crc32($text);
  if (
$crc & 0x80000000) {
   
$crc ^= 0xffffffff;
   
$crc += 1;
   
$crc = -$crc;
  }
  return
$crc;
}
?>

And to show the result in Hex string:

<?php
function int32_to_hex($value) {
 
$value &= 0xffffffff;
  return
str_pad(strtoupper(dechex($value)), 8, "0", STR_PAD_LEFT);
}
?>
up
6
same
20 years ago
bit by bit crc32 computation

<?php

function bitbybit_crc32($str,$first_call=false){

   
//reflection in 32 bits of crc32 polynomial 0x04C11DB7
   
$poly_reflected=0xEDB88320;

   
//=0xFFFFFFFF; //keep track of register value after each call
   
static $reg=0xFFFFFFFF;

   
//initialize register on first call
   
if($first_call) $reg=0xFFFFFFFF;
   
   
$n=strlen($str);
   
$zeros=$n<4 ? $n : 4;

   
//xor first $zeros=min(4,strlen($str)) bytes into the register
   
for($i=0;$i<$zeros;$i++)
       
$reg^=ord($str{$i})<<$i*8;

   
//now for the rest of the string
   
for($i=4;$i<$n;$i++){
       
$next_char=ord($str{$i});
        for(
$j=0;$j<8;$j++)
           
$reg=(($reg>>1&0x7FFFFFFF)|($next_char>>$j&1)<<0x1F)
                ^(
$reg&1)*$poly_reflected;
    }

   
//put in enough zeros at the end
   
for($i=0;$i<$zeros*8;$i++)
       
$reg=($reg>>1&0x7FFFFFFF)^($reg&1)*$poly_reflected;

   
//xor the register with 0xFFFFFFFF
   
return ~$reg;
}

$str="123456789"; //whatever
$blocksize=4; //whatever

for($i=0;$i<strlen($str);$i+=$blocksize) $crc=bitbybit_crc32(substr($str,$i,$blocksize),!$i);

?>
up
3
Ren
16 years ago
Dealing with 32 bit unsigned values overflowing 32 bit php signed values can be done by adding 0x10000000 to any unexpected negative result, rather than using sprintf.

$i = crc32('1');
printf("%u\n", $i);
if (0 > $i)
{
    // Implicitly casts i as float, and corrects this sign.
    $i += 0x100000000;
}
var_dump($i);

Outputs:

2212294583
float(2212294583)
up
4
dave at jufer dot info
16 years ago
This function returns the same int value on a 64 bit mc. like the crc32() function on a 32 bit mc.

<?php
function crcKw($num){
   
$crc = crc32($num);
    if(
$crc & 0x80000000){
       
$crc ^= 0xffffffff;
       
$crc += 1;
       
$crc = -$crc;
    }
    return
$crc;
}
?>
up
2
spectrumizer at cycos dot net
21 years ago
Here is a tested and working CRC16-Algorithm:

<?php
function crc16($string) {
 
$crc = 0xFFFF;
  for (
$x = 0; $x < strlen ($string); $x++) {
   
$crc = $crc ^ ord($string[$x]);
    for (
$y = 0; $y < 8; $y++) {
      if ((
$crc & 0x0001) == 0x0001) {
       
$crc = (($crc >> 1) ^ 0xA001);
      } else {
$crc = $crc >> 1; }
    }
  }
  return
$crc;
}
?>

Regards,
Mario
up
2
alban dot lopez+php [ at ] gmail dot com
12 years ago
I made this code to verify Transmition with Vantage Pro2 ( weather station ) based on CRC16-CCITT standard.

<?php
// CRC16-CCITT validator
$crc_table = array(
   
0x00x10210x20420x30630x40840x50a50x60c60x70e7,
       
0x81080x91290xa14a0xb16b0xc18c0xd1ad0xe1ce0xf1ef,
       
0x12310x2100x32730x22520x52b50x42940x72f70x62d6,
       
0x93390x83180xb37b0xa35a0xd3bd0xc39c0xf3ff0xe3de,
       
0x24620x34430x4200x14010x64e60x74c70x44a40x5485,
       
0xa56a0xb54b0x85280x95090xe5ee0xf5cf0xc5ac0xd58d,
       
0x36530x26720x16110x6300x76d70x66f60x56950x46b4,
       
0xb75b0xa77a0x97190x87380xf7df0xe7fe0xd79d0xc7bc,
       
0x48c40x58e50x68860x78a70x8400x18610x28020x3823,
       
0xc9cc0xd9ed0xe98e0xf9af0x89480x99690xa90a0xb92b,
       
0x5af50x4ad40x7ab70x6a960x1a710xa500x3a330x2a12,
       
0xdbfd0xcbdc0xfbbf0xeb9e0x9b790x8b580xbb3b0xab1a,
       
0x6ca60x7c870x4ce40x5cc50x2c220x3c030xc600x1c41,
       
0xedae0xfd8f0xcdec0xddcd0xad2a0xbd0b0x8d680x9d49,
       
0x7e970x6eb60x5ed50x4ef40x3e130x2e320x1e510xe70,
       
0xff9f0xefbe0xdfdd0xcffc0xbf1b0xaf3a0x9f590x8f78,
       
0x91880x81a90xb1ca0xa1eb0xd10c0xc12d0xf14e0xe16f,
       
0x10800xa10x30c20x20e30x50040x40250x70460x6067,
       
0x83b90x93980xa3fb0xb3da0xc33d0xd31c0xe37f0xf35e,
       
0x2b10x12900x22f30x32d20x42350x52140x62770x7256,
       
0xb5ea0xa5cb0x95a80x85890xf56e0xe54f0xd52c0xc50d,
       
0x34e20x24c30x14a00x4810x74660x64470x54240x4405,
       
0xa7db0xb7fa0x87990x97b80xe75f0xf77e0xc71d0xd73c,
       
0x26d30x36f20x6910x16b00x66570x76760x46150x5634,
       
0xd94c0xc96d0xf90e0xe92f0x99c80x89e90xb98a0xa9ab,
       
0x58440x48650x78060x68270x18c00x8e10x38820x28a3,
       
0xcb7d0xdb5c0xeb3f0xfb1e0x8bf90x9bd80xabbb0xbb9a,
       
0x4a750x5a540x6a370x7a160xaf10x1ad00x2ab30x3a92,
       
0xfd2e0xed0f0xdd6c0xcd4d0xbdaa0xad8b0x9de80x8dc9,
       
0x7c260x6c070x5c640x4c450x3ca20x2c830x1ce00xcc1,
       
0xef1f0xff3e0xcf5d0xdf7c0xaf9b0xbfba0x8fd90x9ff8,
       
0x6e170x7e360x4e550x5e740x2e930x3eb20xed10x1ef0);

   
$test = chr(0xC6).chr(0xCE).chr(0xA2).chr(0x03); // CRC16-CCITT = 0xE2B4
   
genCRC ($test);
      
function
genCRC (&$ptr)
{
   
$crc = 0x0000;
   
$crc_table = $GLOBALS['crc_table'];
    for (
$i = 0; $i < strlen($ptr); $i++)
       
$crc $crc_table[(($crc>>8) ^ ord($ptr[$i]))] ^ (($crc<<8) & 0x00FFFF);
    return
$crc;
}
?>
up
1
gabri dot ns at gmail dot com
13 years ago
if you are looking for a fast function to hash a file, take a look at
http://www.php.net/manual/en/function.hash-file.php
this is crc32 file checker based on a CRC32 guide
it have performance at ~ 625 KB/s on my 2.2GHz Turion
far slower than hash_file('crc32b','filename.ext')
<?php
function crc32_file ($filename)
{
  
$f = @fopen($filename,'rb');
   if (!
$f) return false;
  
   static
$CRC32Table, $Reflect8Table;
   if (!isset(
$CRC32Table))
   {
     
$Polynomial = 0x04c11db7;
     
$topBit = 1 << 31;
      
      for(
$i = 0; $i < 256; $i++)
      {
        
$remainder = $i << 24;
         for (
$j = 0; $j < 8; $j++)
         {
            if (
$remainder & $topBit)
              
$remainder = ($remainder << 1) ^ $Polynomial;
            else
$remainder = $remainder << 1;
         }
        
        
$CRC32Table[$i] = $remainder;
        
         if (isset(
$Reflect8Table[$i])) continue;
        
$str = str_pad(decbin($i), 8, '0', STR_PAD_LEFT);
        
$num = bindec(strrev($str));
        
$Reflect8Table[$i] = $num;
        
$Reflect8Table[$num] = $i;
      }
   }
  
  
$remainder = 0xffffffff;
   while (
$data = fread($f,1024))
   {
     
$len = strlen($data);
      for (
$i = 0; $i < $len; $i++)
      {
        
$byte = $Reflect8Table[ord($data[$i])];
        
$index = (($remainder >> 24) & 0xff) ^ $byte;
        
$crc = $CRC32Table[$index];
        
$remainder = ($remainder << 8) ^ $crc;
      }
   }
  
  
$str = decbin($remainder);
  
$str = str_pad($str, 32, '0', STR_PAD_LEFT);
  
$remainder = bindec(strrev($str));
   return
$remainder ^ 0xffffffff;
}
?>

<?php
$a
= microtime();
echo
dechex(crc32_file('filename.ext'))."\n";
$b = microtime();
echo
array_sum(explode(' ',$b)) - array_sum(explode(' ',$a))."\n";
?>
Output:
ec7369fe
2.384134054184 (or similiar)
up
2
sukitsupaluk at hotmail dot com
12 years ago
small sample convert crc32 to character map

<?php

function khash($data) {
    static
$map="0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ";
   
$hash=crc32($data)+0x100000000;
   
$str = "";
    do {
       
$str = $map[31+ ($hash % 31)] . $str;
       
$hash /= 31;
    } while(
$hash >= 1);    
    return
$str;
}
$test= array(null,TRUE,FALSE,0,"0",1,"1","2","3","ab","abc","abcd","abcde","abcdefoo");
$out = array();
foreach(
$test as $s)
{
   
$out[]=khash($s).": ". $s;
}
var_dump($out);

/*
output:
array
  0 => string 'zVvOYTv: ' (length=9)
  1 => string 'xKDKKL8: 1' (length=10)
  2 => string 'zVvOYTv: ' (length=9)
  3 => string 'zOKCQxh: 0' (length=10)
  4 => string 'zOKCQxh: 0' (length=10)
  5 => string 'xKDKKL8: 1' (length=10)
  6 => string 'xKDKKL8: 1' (length=10)
  7 => string 'AFSzIAO: 2' (length=10)
  8 => string 'BXGSvQJ: 3' (length=10)
  9 => string 'xZWOQSu: ab' (length=11)
  10 => string 'AVAwHOR: abc' (length=12)
  11 => string 'zKASNE1: abcd' (length=13)
  12 => string 'xLCTOV7: abcde' (length=14)
  13 => string 'zQLzKMt: abcdefoo' (length=17)

*/

?>
up
1
arris at zsolttech dot com
12 years ago
not found anywhere crc64 based on http://bioinfadmin.cs.ucl.ac.uk/downloads/crc64/crc64.c .

(use gmp module)

<?php

/* OLDCRC */
define('POLY64REV', "d800000000000000");
define('INITIALCRC', "0000000000000000");
define('TABLELEN', 256);
/* NEWCRC */
// define('POLY64REV', "95AC9329AC4BC9B5");
// define('INITIALCRC', "FFFFFFFFFFFFFFFF");

if(function_exists('gmp_init')){
        class
CRC64{

                private static
$CRCTable = array();

                public static function
encode($seq){

                       
$crc = gmp_init(INITIALCRC, 16);
                       
$init = FALSE;
                       
$poly64rev = gmp_init(POLY64REV, 16);

                        if (!
$init)
                        {
                               
$init = TRUE;
                                for (
$i = 0; $i < TABLELEN; $i++)
                                {
                                       
$part = gmp_init($i, 10);
                                        for (
$j = 0; $j < 8; $j++)
                                        {
                                                if (
gmp_strval(gmp_and($part, "0x1")) != "0"){
                                                       
// if (gmp_testbit($part, 1)){ /* PHP 5 >= 5.3.0, untested */
                                                       
$part = gmp_xor(gmp_div_q($part, "2"), $poly64rev);
                                                } else {
                                                       
$part = gmp_div_q($part, "2");
                                                }
                                        }
                                       
self::$CRCTable[$i] = $part;
                                }
                        }

                        for(
$k = 0; $k < strlen($seq); $k++){
                               
$tmp_gmp_val = gmp_init(ord($seq[$k]), 10);
                               
$tableindex = gmp_xor(gmp_and($crc, "0xff"), $tmp_gmp_val);
                               
$crc = gmp_div_q($crc, "256");
                               
$crc = gmp_xor($crc, self::$CRCTable[gmp_strval($tableindex, 10)]);
                        }

                       
$res = gmp_strval($crc, 16);

                        return
$res;
                }
        }
} else {
        die(
"Please install php-gmp package!!!");
}
?>
up
1
quix at free dot fr
20 years ago
I needed the crc32 of a file that was pretty large, so I didn't want to read it into memory.
So I made this:

<?php
    $GLOBALS
['__crc32_table']=array();        // Lookup table array
   
__crc32_init_table();

    function
__crc32_init_table() {            // Builds lookup table array
        // This is the official polynomial used by
        // CRC-32 in PKZip, WinZip and Ethernet.
       
$polynomial = 0x04c11db7;

       
// 256 values representing ASCII character codes.
       
for($i=0;$i <= 0xFF;++$i) {
           
$GLOBALS['__crc32_table'][$i]=(__crc32_reflect($i,8) << 24);
            for(
$j=0;$j < 8;++$j) {
               
$GLOBALS['__crc32_table'][$i]=(($GLOBALS['__crc32_table'][$i] << 1) ^
                    ((
$GLOBALS['__crc32_table'][$i] & (1 << 31))?$polynomial:0));
            }
           
$GLOBALS['__crc32_table'][$i] = __crc32_reflect($GLOBALS['__crc32_table'][$i], 32);
        }
    }

    function
__crc32_reflect($ref, $ch) {        // Reflects CRC bits in the lookup table
       
$value=0;
       
       
// Swap bit 0 for bit 7, bit 1 for bit 6, etc.
       
for($i=1;$i<($ch+1);++$i) {
            if(
$ref & 1) $value |= (1 << ($ch-$i));
           
$ref = (($ref >> 1) & 0x7fffffff);
        }
        return
$value;
    }

    function
__crc32_string($text) {        // Creates a CRC from a text string
        // Once the lookup table has been filled in by the two functions above,
        // this function creates all CRCs using only the lookup table.

        // You need unsigned variables because negative values
        // introduce high bits where zero bits are required.
        // PHP doesn't have unsigned integers:
        // I've solved this problem by doing a '&' after a '>>'.

        // Start out with all bits set high.
       
$crc=0xffffffff;
       
$len=strlen($text);

       
// Perform the algorithm on each character in the string,
        // using the lookup table values.
       
for($i=0;$i < $len;++$i) {
           
$crc=(($crc >> 8) & 0x00ffffff) ^ $GLOBALS['__crc32_table'][($crc & 0xFF) ^ ord($text{$i})];
        }
       
       
// Exclusive OR the result with the beginning value.
       
return $crc ^ 0xffffffff;
    }
   
    function
__crc32_file($name) {            // Creates a CRC from a file
        // Info: look at __crc32_string

        // Start out with all bits set high.
       
$crc=0xffffffff;

        if((
$fp=fopen($name,'rb'))===false) return false;

       
// Perform the algorithm on each character in file
       
for(;;) {
           
$i=@fread($fp,1);
            if(
strlen($i)==0) break;
           
$crc=(($crc >> 8) & 0x00ffffff) ^ $GLOBALS['__crc32_table'][($crc & 0xFF) ^ ord($i)];
        }
       
        @
fclose($fp);
       
       
// Exclusive OR the result with the beginning value.
       
return $crc ^ 0xffffffff;
    }
?>
up
1
roberto at spadim dot com dot br
17 years ago
MODBUS RTU, CRC16,
input-> modbus rtu string
output -> 2bytes string, in correct modbus order

<?php
function crc16($string,$length=0){

   
$auchCRCHi=array(    0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
               
0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
               
0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01,
               
0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
               
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81,
               
0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0,
               
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01,
               
0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
               
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
               
0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
               
0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01,
               
0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
               
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
               
0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
               
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01,
               
0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
               
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
               
0x40);
   
$auchCRCLo=array(    0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7, 0x05, 0xC5, 0xC4,
               
0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E, 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09,
               
0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD,
               
0x1D, 0x1C, 0xDC, 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3,
               
0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32, 0x36, 0xF6, 0xF7,
               
0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A,
               
0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38, 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE,
               
0x2E, 0x2F, 0xEF, 0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
               
0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1, 0x63, 0xA3, 0xA2,
               
0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4, 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F,
               
0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB,
               
0x7B, 0x7A, 0xBA, 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5,
               
0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0, 0x50, 0x90, 0x91,
               
0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C,
               
0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E, 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88,
               
0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
               
0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80,
               
0x40);
   
$length        =($length<=0?strlen($string):$length);
   
$uchCRCHi    =0xFF;
   
$uchCRCLo    =0xFF;
   
$uIndex        =0;
    for (
$i=0;$i<$length;$i++){
       
$uIndex        =$uchCRCLo ^ ord(substr($string,$i,1));
       
$uchCRCLo    =$uchCRCHi ^ $auchCRCHi[$uIndex];
       
$uchCRCHi    =$auchCRCLo[$uIndex] ;
    }
    return(
chr($uchCRCLo).chr($uchCRCHi));
}
?>
up
0
toggio at writeme dot com
8 years ago
A faster implementation of modbus CRC16

function crc16($data)
{
   $crc = 0xFFFF;
   for ($i = 0; $i < strlen($data); $i++)
   {
     $crc ^=ord($data[$i]);
    
        for ($j = 8; $j !=0; $j--)
        {
            if (($crc & 0x0001) !=0)
            {
                $crc >>= 1;
                $crc ^= 0xA001;
            }
            else
                $crc >>= 1;
        }
    }   
   return $crc;
}
up
0
mail at tristansmis dot nl
16 years ago
I used the abs value of this function on a 32-bit system. When porting the code to a 64-bit system I’ve found that the value is different. The following code has the same outcome on both systems.
<?php

   $crc
= abs(crc32($string));
   if(
$crc & 0x80000000){
     
$crc ^= 0xffffffff;
     
$crc += 1;
   }

  
/* Old solution
    * $crc = abs(crc32($string))
    */

?>
up
-2
dotg at mail dot ru
7 years ago
crc32() on php 32bit and 64 bit not equal in some values

i use abs for result in positive for 32 bit

not equal
<?=abs(crc32(1));?>
64 bit
2212294583
32 bit
2082672713

equal
<?=abs(crc32(3));?>
64 bit
1842515611
32 bit
1842515611
up
-10
waldomonster at netjukebox dot demon dot nl
19 years ago
<?php
$data
= 'dot';
echo
dechex(crc32($data));
?>

Returns 59278a3
Witch is missing a leading zero.

<?php
$data
= 'dot';
echo
str_pad(dechex(crc32($data)), 8, '0', STR_PAD_LEFT);
?>

Returns the correct string: 059278a3
To Top