Operadores de Comparación
Be aware of using error control operator in statements before include() like this:
<?PHP
(@include("file.php"))
OR die("Could not find file.php!");
?>
This cause, that error reporting level is set to zero also for the included file. So if there are some errors in the included file, they will be not displayed.
Operadores de Control de Errores
PHP ofrece soporte para un operador de control de errores: el signo de arroba (@). Cuando es colocado al comienzo de una expresión en PHP, cualquier mensaje de error que pudiera generarse a causa de esa expresión será ignorado.
Si la característica track_errors está habilitada, cualquier mensaje de error generado por la expresión será almacenado en la variable $php_errormsg. La variable será sobrescrita en cada instancia de error, así que realice sus chequeos de forma temprana si quiere usarla.
<?php
/* Error intencional de archivo */
$mi_archivo = @file ('archivo_que_no_existe') or
die ("La apertura de archivo ha fallado: el error fue '$php_errormsg'");
// esto funciona con cualquier expresión, no solo con funciones:
$valor = @$cache[$llave];
// no producirá una anotación si el índice $llave no existe.
?>
Note: El operador @ trabaja sólo sobre expresiones. Una simple regla de oro es: si usted puede tomar el valor de algo, entonces puede usar el operador @ sobre ese algo. Por ejemplo, puede usarlo al inicio de variables, llamadas a funciones y sencencias include(), constantes, y así sucesivamente. No puede usarlo sobre definiciones de función o clase, ni sobre estructuras condicionales como if y foreach, y así sucesivamente.
Vea también error_reporting() y la sección del manual sobre funciones de Gestión de Errores y Registros.
Warning
En la actualidad, el operador de prefijo "@" para control de errores deshabilitará incluso el reporte de errores en casos de fallos críticos que terminarán la ejecución del script. Entre otras cosas, esto quiere decir que si usa "@" para eliminar los errores de una cierta función, y ésta no se encuentra disponible o ha sido escrita de forma incorrecta, el script se detendrá en ese punto sin dar indicación alguna del motivo.
add a note
User Contributed NotesOperadores de Control de Errores
M. T.
11-Oct-2009 04:20
11-Oct-2009 04:20
dsbeam at gmail dot com
02-Sep-2009 02:22
02-Sep-2009 02:22
Though error suppression can be dangerous at times, it can be useful as well. I've found the following statements roughly equivalent:
if( isset( $var ) && $var === $something )
if( @$var === $something )
EXCEPT when you're comparing against a boolean value (when $something is false). In that case, if it's not set the conditional will still be triggered.
I've found this useful when I want to check a value that might not exist:
if( @$_SERVER[ 'HTTP_REFERER' ] !== '/www/some/path/file' )
or when we want to see if a checkbox / radio button have been submitted with a post action
if( @$_POST[ 'checkbox' ] === 'yes' )
Just letting you guys know my findings, :)
gerrywastaken
19-May-2009 08:46
19-May-2009 08:46
Error suppression should be avoided if possible as it doesn't just suppress the error that you are trying to stop, but will also suppress errors that you didn't predict would ever occur. This will make debugging a nightmare.
It is far better to test for the condition that you know will cause an error before preceding to run the code. This way only the error that you know about will be suppressed and not all future errors associated with that piece of code.
There may be a good reason for using outright error suppression in favor of the method I have suggested, however in the many years I've spent programming web apps I've yet to come across a situation where it was a good solution. The examples given on this manual page are certainly not situations where the error control operator should be used.
taras dot dot dot di at gmail dot com
12-Aug-2008 03:29
12-Aug-2008 03:29
I was confused as to what the @ symbol actually does, and after a few experiments have concluded the following:
* the error handler that is set gets called regardless of what level the error reporting is set on, or whether the statement is preceeded with @
* it is up to the error handler to impart some meaning on the different error levels. You could make your custom error handler echo all errors, even if error reporting is set to NONE.
* so what does the @ operator do? It temporarily sets the error reporting level to 0 for that line. If that line triggers an error, the error handler will still be called, but it will be called with an error level of 0
Hope this helps someone
beatngu
27-May-2008 09:29
27-May-2008 09:29
NB The @ operator doesn't work when throwing errors as exceptions using the ErrorException class
nospam at blog dot fileville dot net
03-Jan-2007 07:58
03-Jan-2007 07:58
If you want to log all the error messages for a php script from a session you can use something like this:
<?php
session_start();
function error($error, $return=FALSE) {
global $php_errormsg;
if(isset($_SESSION['php_errors'])) {
$_SESSION['php_errors'] = array();
}
$_SESSION['php_errors'][] = $error; // Maybe use $php_errormsg
if($return == TRUE) {
$message = "";
foreach($_SESSION['php_errors'] as $php_error) {
$messages .= $php_error."\n";
}
return $messages; // Or you can use use $_SESSION['php_errors']
}
}
?>
Hope this helps someone...
13-Dec-2006 01:52
error_reporting()==0 for detecting the @ error suppression assumes that you did not set the error level to 0 in the first place.
However, typically if you want to set your own error handler, you would set the error_reporting to 0. Therefore, an alternative to detect the @ error suppression is required.
programming at kennebel dot com
13-Oct-2006 01:38
13-Oct-2006 01:38
To suppress errors for a new class/object:
<?php
// Tested: PHP 5.1.2 ~ 2006-10-13
// Typical Example
$var = @some_function();
// Class/Object Example
$var = @new some_class();
// Does NOT Work!
//$var = new @some_class(); // syntax error
?>
I found this most useful when connecting to a
database, where i wanted to control the errors
and warnings displayed to the client, while still
using the class style of access.
me at hesterc dot fsnet dot co dot uk
03-Mar-2005 04:25
03-Mar-2005 04:25
If you wish to display some text when an error occurs, echo doesn't work. Use print instead. This is explained on the following link 'What is the difference between echo and print?':
http://www.faqts.com/knowledge_base/view.phtml/aid/1/fid/40
It says "print can be used as part of a more complex expression where echo cannot".
Also, you can add multiple code to the result when an error occurs by separating each line with "and". Here is an example:
<?php
$my_file = @file ('non_existent_file') or print 'File not found.' and $string = ' Honest!' and print $string and $fp = fopen ('error_log.txt', 'wb+') and fwrite($fp, $string) and fclose($fp);
?>
A shame you can't use curly brackets above to enclose multiple lines of code, like you can with an if statement or a loop. It could make for a single long line of code. You could always call a function instead.
frogger at netsurf dot de
26-Dec-2004 04:19
26-Dec-2004 04:19
Better use the function trigger_error() (http://de.php.net/manual/en/function.trigger-error.php)
to display defined notices, warnings and errors than check the error level your self. this lets you write messages to logfiles if defined in the php.ini, output
messages in dependency to the error_reporting() level and suppress output using the @-sign.