stripos

(PHP 5, PHP 7, PHP 8)

striposEncuentra la posición de la primera aparición de un substring en un string sin considerar mayúsculas ni minúsculas

Descripción

stripos(string $haystack, string $needle, int $offset = 0): mixed

Encuentra la posición numérica de la primera aparición de needle (aguja) en el string haystack (pajar).

A diferencia de strpos(), stripos() no considera las mayúsculas ni las minúsculas.

Parámetros

haystack

El string donde buscar.

needle

Observe que needle puede ser un string de uno o más caracteres.

Si needle no es un string, será convertido a un valor de tipo integer y se aplicará como el valor ordinal de un carácter.

offset

Si se específica, la búsqueda se iniciará en éste número de caracteres contados desde el inicio del string. A diferencia de strrpos() y strripos(), offset no puede ser negativo.

Valores devueltos

Devuelve la posición donde está la aguja, en relación al inicio del string haystack (independiente de offset). Observe también que las posiciones de inicio de los string empiezan en 0, y no en 1.

Devuelve false si no se encontró la aguja.

Advertencia

Esta función puede devolver el valor booleano false, pero también puede devolver un valor no booleano que se evalúa como false. Por favor lea la sección sobre Booleanos para más información. Use el operador === para comprobar el valor devuelto por esta función.

Ejemplos

Ejemplo #1 Ejemplos de stripos()

<?php
$findme
= 'a';
$mystring1 = 'xyz';
$mystring2 = 'ABC';

$pos1 = stripos($mystring1, $findme);
$pos2 = stripos($mystring2, $findme);

// No, 'a' sin duda no está en 'xyz'
if ($pos1 === false) {
echo
"El string '$findme' no se encontró en el strng '$mystring1'";
}

// Observe el uso de ===. Usar solamente == no funcionará como se espera
// debido a que la posición de 'a' es el 0º (primer) caracter.
if ($pos2 !== false) {
echo
"Se encontró '$findme' en '$mystring2' en la posición $pos2";
}
?>

Notas

Nota: Esta función es segura binariamente.

Ver también

  • mb_stripos() - Busca la posición de la primera ocurrencia de un string dentro de otro, insensible a mayúsculas/minúsculas
  • strpos() - Encuentra la posición de la primera ocurrencia de un substring en un string
  • strrpos() - Encuentra la posición de la última aparición de un substring en un string
  • strripos() - Encuentra la posición de la última aparición de un substring insensible a mayúsculas y minúsculas en un string
  • stristr() - strstr insensible a mayúsculas y minúsculas
  • substr() - Devuelve parte de una cadena
  • str_ireplace() - Versión insensible a mayúsculas y minúsculas de str_replace

add a note add a note

User Contributed Notes 8 notes

up
39
emperorshishire at gmail dot com
15 years ago
I found myself needing to find the first position of multiple needles in one haystack.  So I wrote this little function:

<?php
function multineedle_stripos($haystack, $needles, $offset=0) {
    foreach(
$needles as $needle) {
       
$found[$needle] = stripos($haystack, $needle, $offset);
    }
    return
$found;
}

// It works as such:
$haystack = "The quick brown fox jumps over the lazy dog.";
$needle = array("fox", "dog", ".", "duck")
var_dump(multineedle_stripos($haystack, $needle));
/* Output:
   array(3) {
     ["fox"]=>
     int(16)
     ["dog"]=>
     int(40)
     ["."]=>
     int(43)
     ["duck"]=>
     bool(false)
   }
*/
?>
up
3
sorrynorealemail at example dot com
5 years ago
Unlike strpos() it seems that stripos() does NOT issue a WARNING if the needle is an empty string ''.
up
3
spam at kleppinger dot com
9 years ago
Regarding the function by spam at wikicms dot org

It is very bad practice to use the same function name as an existing php function but have a different output format.  Someone maintaining the code in the future is likely to be very confused by this.  It will also be hard to eradicate from a codebase because the naming is identical so each use of stripos() would have to be analyzed to see how it is expecting the output format (bool or number/bool).

Calling it string_found() or something like that would make a lot more sense for long-term use.
up
1
Ian Macdonald
8 years ago
Regarding the === note, it might be worth clarifying that the correct tests for a binary found/not found condition are  !==false to detect found, and ===false to detect not found.
up
0
emanuel dot karlsson at rolfsbuss dot se
5 years ago
Finding numbers in strings requires you to cast the number to string first.

strpos("123", 2) !== strpos("123", "2")
up
-14
steve at opilo dot net
10 years ago
A handy function if you need to adjust layout based on whether or not a string contains descending letters:

<?php function containsDescenders($text) {
   
$descenders = array("g","j","p","q","y");
    foreach (
$descenders as $letter) {
        if (
stripos($text,$letter) !== false) {
            return
true;
        }
    }
    return
false;
}
?>
up
-20
spam at wikicms dot org
10 years ago
If you like using ternary operator, I wrote simple example how to use stripos function.
Also, in my example I add "How to use namespaces" for wide knowledges for newbies.

<?php
namespace My;

//You can be free using core functions in your NameSpaces (My)
function stripos($haystack, $needle) {
   
//To call core function (from global NS) you should add backslash only - \func
   
return (FALSE === \stripos($haystack, $needle)) ? FALSE : TRUE;
}

var_dump(stripos($haystack = 'John knows English language.', $needle = 'john')); //TRUE
var_dump(stripos($haystack = 'Sara knows English language too.', $needle = 'john')); //FALSE
?>
up
-21
grf at post dot cz
16 years ago
this would to work with any language, i hope.
tested on czech (eastern europe) lang.

<?php
/****************************************
*    SAFE HIGHLIGHT
****************************************/
/**
* function finds and encase every string in a $needleArr array with
* strings $shearLft (from the left side) and $shearRgt (guess from which
* side).
* already encased needles are IGNORED for any other step, so order
* of needles in $needleArr is pretty important.
*
* function is searching needles in case-insensitive mode,
* but case in the subject is saved.
*
* can you do it better? so, do it.
*
* @param array $needleArr array of needles
* @param string $shearLft left shear
* @param string $shearRgt right shear
* @param string $subject subject
* @param string $encoding encoding ('utf-8' is default)
*
* @author griffin
*/
function safeHighlight( $needleArr, $shearLft, $shearRgt, $subject, $encoding = 'utf-8')
{
   
   
// encoding
   
$e = $encoding;
   
   
// oh, no needles
   
if( !is_array( $needleArr))
        return
$subject;
       
   
// empty keys throw-off, only unique, reindex
   
$nA = array_values(
           
array_unique(
               
array_diff( $needleArr, array(''))
            )
        );
   
   
// needle count
   
if( !($nC = count( $nA)))
        return
$subject; // nothing to hl
       
    // shear length
   
if( !(($rLL = mb_strlen( $rL = $shearLft, $e))
    + (
$rRL = mb_strlen( $rR = $shearRgt, $e))))
        return
$subject; // no shears
   
    // subject length
   
if( !($sL = mb_strlen( $s = $subject, $e)))
        return
null; // empty subject
       
    // subject in lowercase (we need to aviod
    // using mb_stripos due to PHP version)
   
$sW = mb_strtolower( $s, $e);
   
   
// masking ~ 0=not changed, 1=changed
   
$m = str_repeat( '0', $sL);
   
   
// loop for each needle
   
for( $n=0; $n<$nC; $n++)
    {
       
       
// needle string loWercase
       
$nW = mb_strtolower( $nA[ $n], $e);
       
       
$o = 0; // offset
       
$nL = mb_strlen( $nW, $e); // needle length

        // search needle
       
while( false !== ($p = mb_strpos( $sW, $nW, $o, $e)))
        {
           
// oh hurrey, needle found on $p position
           
            // is founded needle already modified? (in full-length)
           
for( $q=$p; $q<($p+$nL); $q++)
                if(
$m[ $q])
                {
                   
// ai, caramba. already modified, jump over
                   
$o+= $nL;
                   
                   
// continue for while() loop - not for for() loop!
                   
continue 2;
                }
           
           
// explode subject and mask into three parts
            // partA|needle|partB
           
$sE[0] = mb_substr( $s, 0, $p, $e);
           
$sE[1] = mb_substr( $s, $p, $nL, $e);
           
$sE[2] = mb_substr( $s, $p+$nL, $sL-$p-$nL, $e);
           
           
// mask
            // partA|partB (needle not needed)
           
$mE[0] = mb_substr( $m, 0, $p, $e);
           
$mE[1] = mb_substr( $m, $p+$nL, $sL-$p-$nL, $e);
           
           
// apply shears
           
$sE[1] = $rL.$sE[1].$rR;
           
           
// update sunject length
           
$sL+= $rLL + $rRL;
           
           
// update mask
           
$m = $mE[0] . str_repeat( '1', $rLL + $nL + $rRL) . $mE[1];
           
           
// implode into a subject
           
$s = implode( $sE);
           
           
// update lowercase subject
           
$sW = mb_strtolower( $s, $e);
           
           
// increase offset
           
$o+= $rLL + $nL + $rRL;
           
           
// end of string reached
           
if( $o>=$sL)
                break;
           
        }
// while()
       
   
} // for( $n=0; $n<$nC; $n++)
   
    // oouu yeaaa, kick the subject out of the function
   
return $s;
   
}
// function safeHighlight()
/****************************************
*    END: SAFE HIGHLIGHT
****************************************/
?>
To Top