PHP 5.6.0beta1 released

do-while

(PHP 4, PHP 5)

Los bucles do-while son muy similares a los bucles while, excepto que la expresión verdadera es verificada al final de cada iteración en lugar que al principio. La diferencia principal con los bucles while es que está garantizado que corra la primera iteración de un bucle do-while (la expresión verdadera sólo es verificada al final de la iteración), mientras que no necesariamente va a correr con un bucle while regular (la expresión verdadera es verificada al principio de cada iteración, si se evalúa como FALSE justo desde el comienzo, la ejecución del bucle terminaría inmediatamente).

Hay una sola sintaxis para bucles do-while:

<?php
$i 
0;
do {
    echo 
$i;
} while (
$i 0);
?>

El bucle de arriba se ejecutaría exactamente una sola vez, ya que después de la primera iteración, cuando la expresión verdadera es verificada, se evalúa como FALSE ($i no es mayor que 0) y termina la ejecución del bucle.

Los usuarios avanzados de C pueden estar familiarizados con un uso distinto del bucle do-while, para permitir parar la ejecución en medio de los bloques de código, mediante el encapsulado con do-while (0), y utilizando la sentencia break. El siguiente fragmento de código demuestra esto:

<?php
do {
    if (
$i 5) {
        echo 
"i no es lo suficientemente grande";
        break;
    }
    
$i *= $factor;
    if (
$i $minimum_limit) {
        break;
    }
   echo 
"i está bien";

    
/* procesar i */

} while (0);
?>

No se preocupe si no se entiende esto completamente o en absoluto. Se pueden codificar scripts e incluso scripts potentes sin usar esta 'característica'. Desde PHP 5.3.0, es posible utilizar el operador goto en lugar de este hack.

add a note add a note

User Contributed Notes 8 notes

up
5
jayreardon at gmail dot com
7 years ago
There is one major difference you should be aware of when using the do--while loop vs. using a simple while loop:  And that is when the check condition is made. 

In a do--while loop, the test condition evaluation is at the end of the loop.  This means that the code inside of the loop will iterate once through before the condition is ever evaluated.  This is ideal for tasks that need to execute once before a test is made to continue, such as test that is dependant upon the results of the loop. 

Conversely, a plain while loop evaluates the test condition at the begining of the loop before any execution in the loop block is ever made. If for some reason your test condition evaluates to false at the very start of the loop, none of the code inside your loop will be executed.
up
1
xiaomao5 at live dot com
3 years ago
Another hack
If you want $type to only have a value of 0 or 1, you can do this:

<?php
do {
    echo
'Choose a type, 0 or 1: ';
   
$type = trim(fgets(STDIN));
    if (
$type == 0) {
       
/* do stuff */
   
} elseif ($type == 1) {
       
/* do stuff */   
   
}
} while (
$type != 0 && $type != 1);
?>
up
1
shaida dot mca at gmail dot com
3 years ago
Example of Do while :-

<?php
$i
= 0;
echo
'This code will run at least once because i default value is 0.<br/>';
do {
echo
'i value is ' . $i . ', so code block will run. <br/>';
++
$i;
} while (
$i < 10);
?>
up
1
Ryan
5 years ago
I've found that the most useful thing to use do-while loops for is multiple checks of file existence. The guaranteed iteration means that it will check through at least once, which I had trouble with using a simple "while" loop because it never incremented at the end.

My code was:

<?php
$filename
= explode(".", $_FILES['file']['name']); // File being uploaded
$i=0; // Number of times processed (number to add at the end of the filename)
do {
 
/* Since most files being uploaded don't end with a number,
      we have to make sure that there is a number at the end
      of the filename before we start simply incrementing. I
      admit there is probably an easier way to do this, but this
      was a quick slap-together job for a friend, and I find it
      works just fine. So, the first part "if($i > 0) ..." says that
      if the loop has already been run at least once, then there
      is now a number at the end of the filename and we can
      simply increment that. Otherwise, we have to place a
      number at the end of the filename, which is where $i
      comes in even handier */

 
if($i > 0) $filename[0]++;
  else
$filename[0] = $filename[0].$i;
 
$i++;
} while(
file_exists("uploaded/".$filename[0].".".$filename[1]));

/* Now that everything is uploaded, we should move it
    somewhere it can be accessed. Hence, the "uploaded"
    folder. */
move_uploaded_file($_FILES['file']['tmp_name'], "uploaded/".$filename[0].".".$filename[1]);
?>

I'm sure there are plenty of ways of doing this without using the do-while loop, but I managed to toss this one together in no-time flat, and I'm not a great PHP programmer. =) It's simple and effective, and I personally think it works better than any "for" or "while" loop that I've seen that does the same thing.
up
1
andrew at NOSPAM dot devohive dot com
5 years ago
I'm guilty of writing constructs without curly braces sometimes... writing the do--while seemed a bit odd without the curly braces ({ and }), but just so everyone is aware of how this is written with a do--while...

a normal while:
<?php
  
while ( $isValid ) $isValid = doSomething($input);
?>

a do--while:
<?php
  
do $isValid = doSomething($input);
   while (
$isValid );
?>

Also, a practical example of when to use a do--while when a simple while just won't do (lol)... copying multiple 2nd level nodes from one document to another using the DOM XML extension

<?php
  
# open up/create the documents and grab the root element
  
$fileDoc  = domxml_open_file('example.xml'); // existing xml we want to copy
  
$fileRoot = $fileDoc->document_element();
  
$newDoc   = domxml_new_doc('1.0'); // new document we want to copy to
  
$newRoot  = $newDoc->create_element('rootnode');
  
$newRoot  = $newDoc->append_child($newRoot); // this is the node we want to copy to

   # loop through nodes and clone (using deep)
  
$child = $fileRoot->first_child(); // first_child must be called once and can only be called once
  
do $newRoot->append_child($child->clone_node(true)); // do first, so that the result from first_child is appended
  
while ( $child = $child->next_sibling() ); // we have to use next_sibling for everything after first_child
?>
up
-2
jantsch at gmail dot com
6 years ago
Useful when you want to continue to read a recordset that was already being read like in:

<?
$sql
= "select * from customers";
$res = mysql_query( $sql );

// read the first record
if( $rs = mysql_fetch_row( $res ) ){
  
// do something with this record

}

// do another stuff here

// keep reading till the end
if( mysql_num_rows( $res )>1 ){
   do{
     
// processing the records till the end

  
}while( $rs = mysql_fetch_row( $res ));

}

?>
up
-5
david dot schueler at tel-billig dot de
3 years ago
If you are trying to use a construct like this:
<?php
do {
   
// some code to run only one more time if expression is true
   
if ($your_expression == true)
        continue;
} while (
false);
?>
It will NOT loop as expected, because the continue tries to run the "next" loop, but the expression says just "false" so there is no next loop. The continue exits the while loop.
To get around this you may use an other expression, like this
<?php
do {
   
// some code to run only one more time if expression is true
   
if ($your_expression == true)
        continue;
    break;
} while (
true);
?>
or use the goto statement since PHP 5.3.
up
-7
info at pkrules dot in
5 months ago
Notice the way of using the loops:-
 <?php
$arr
=array("orange","banana","apple","raspberry");

$i=0;
while(
$i < count($arr)){
 
$a=$arr[$i];
  echo
$a."<br />";
 
$i++;
}
/*
orange
banana
apple
raspberry

*/
echo "<br /> &nbsp;";
$i=0;
$c=count($arr);
while(
$i < $c){
 
$a=$arr[$i];
 echo
$a."<br />";
 
$i++;
}
/*
orange
banana
apple
raspberry

*/
echo "&nbsp;<br />";
while(
$a =$arr[1*--$i]){
echo
$a."<br />";
if(
$i<=0)break;

}
echo
"<br />";
/*
orange
banana
apple
raspberry

*/
foreach($arr as $i){
print
$i;
echo
"<br />";
}
/*
orange
banana
apple
raspberry

*/
?>
To Top