foreach

(PHP 4, PHP 5, PHP 7, PHP 8)

The foreach construct provides an easy way to iterate over arrays. foreach works only on arrays and objects, and will issue an error when you try to use it on a variable with a different data type or an uninitialized variable. There are two syntaxes:

foreach (iterable_expression as $value)
    statement
foreach (iterable_expression as $key => $value)
    statement

The first form traverses the iterable given by iterable_expression. On each iteration, the value of the current element is assigned to $value.

The second form will additionally assign the current element's key to the $key variable on each iteration.

Note that foreach does not modify the internal array pointer, which is used by functions such as current() and key().

It is possible to customize object iteration.

In order to be able to directly modify array elements within the loop precede $value with &. In that case the value will be assigned by reference.

<?php
$arr
= array(1, 2, 3, 4);
foreach (
$arr as &$value) {
$value = $value * 2;
}
// $arr is now array(2, 4, 6, 8)
unset($value); // break the reference with the last element
?>

Warning

Reference of a $value and the last array element remain even after the foreach loop. It is recommended to destroy it by unset(). Otherwise you will experience the following behavior:

<?php
$arr
= array(1, 2, 3, 4);
foreach (
$arr as &$value) {
$value = $value * 2;
}
// $arr is now array(2, 4, 6, 8)

// without an unset($value), $value is still a reference to the last item: $arr[3]

foreach ($arr as $key => $value) {
// $arr[3] will be updated with each value from $arr...
echo "{$key} => {$value} ";
print_r($arr);
}
// ...until ultimately the second-to-last value is copied onto the last value

// output:
// 0 => 2 Array ( [0] => 2, [1] => 4, [2] => 6, [3] => 2 )
// 1 => 4 Array ( [0] => 2, [1] => 4, [2] => 6, [3] => 4 )
// 2 => 6 Array ( [0] => 2, [1] => 4, [2] => 6, [3] => 6 )
// 3 => 6 Array ( [0] => 2, [1] => 4, [2] => 6, [3] => 6 )
?>

It is possible to iterate a constant array's value by reference:

<?php
foreach (array(1, 2, 3, 4) as &$value) {
$value = $value * 2;
}
?>

Note:

foreach does not support the ability to suppress error messages using @.

Some more examples to demonstrate usage:

<?php
/* foreach example 1: value only */

$a = array(1, 2, 3, 17);

foreach (
$a as $v) {
echo
"Current value of \$a: $v.\n";
}

/* foreach example 2: value (with its manual access notation printed for illustration) */

$a = array(1, 2, 3, 17);

$i = 0; /* for illustrative purposes only */

foreach ($a as $v) {
echo
"\$a[$i] => $v.\n";
$i++;
}

/* foreach example 3: key and value */

$a = array(
"one" => 1,
"two" => 2,
"three" => 3,
"seventeen" => 17
);

foreach (
$a as $k => $v) {
echo
"\$a[$k] => $v.\n";
}

/* foreach example 4: multi-dimensional arrays */
$a = array();
$a[0][0] = "a";
$a[0][1] = "b";
$a[1][0] = "y";
$a[1][1] = "z";

foreach (
$a as $v1) {
foreach (
$v1 as $v2) {
echo
"$v2\n";
}
}

/* foreach example 5: dynamic arrays */

foreach (array(1, 2, 3, 4, 5) as $v) {
echo
"$v\n";
}
?>

Unpacking nested arrays with list()

(PHP 5 >= 5.5.0, PHP 7, PHP 8)

It is possible to iterate over an array of arrays and unpack the nested array into loop variables by providing a list() as the value.

For example:

<?php
$array
= [
[
1, 2],
[
3, 4],
];

foreach (
$array as list($a, $b)) {
// $a contains the first element of the nested array,
// and $b contains the second element.
echo "A: $a; B: $b\n";
}
?>

The above example will output:

A: 1; B: 2
A: 3; B: 4

You can provide fewer elements in the list() than there are in the nested array, in which case the leftover array values will be ignored:

<?php
$array
= [
[
1, 2],
[
3, 4],
];

foreach (
$array as list($a)) {
// Note that there is no $b here.
echo "$a\n";
}
?>

The above example will output:

1
3

A notice will be generated if there aren't enough array elements to fill the list():

<?php
$array
= [
[
1, 2],
[
3, 4],
];

foreach (
$array as list($a, $b, $c)) {
echo
"A: $a; B: $b; C: $c\n";
}
?>

The above example will output:


Notice: Undefined offset: 2 in example.php on line 7
A: 1; B: 2; C: 

Notice: Undefined offset: 2 in example.php on line 7
A: 3; B: 4; C: 

add a note add a note

User Contributed Notes 25 notes

up
281
adam dot sindelar at gmail dot com
15 years ago
You can also use the alternative syntax for the foreach cycle:

<?php
foreach($array as $element):
 
#do something
endforeach;
?>

Just thought it worth mentioning.
up
130
php at darkain dot com
11 years ago
"Reference of a $value and the last array element remain even after the foreach loop. It is recommended to destroy it by unset()."

I cannot stress this point of the documentation enough! Here is a simple example of exactly why this must be done:

<?php
$arr1
= array("a" => 1, "b" => 2, "c" => 3);
$arr2 = array("x" => 4, "y" => 5, "z" => 6);

foreach (
$arr1 as $key => &$val) {}
foreach (
$arr2 as $key => $val) {}

var_dump($arr1);
var_dump($arr2);
?>

The output is:
array(3) { ["a"]=> int(1) ["b"]=> int(2) ["c"]=> &int(6) }
array(3) { ["x"]=> int(4) ["y"]=> int(5) ["z"]=> int(6) }

Notice how the last index in $arr1 is now the value from the last index in $arr2!
up
55
KEINOS
6 years ago
Even though it is not mentioned in this article, you can use "break" control structure to exit from the "foreach" loop.

<?php

$array
= [ 'one', 'two', 'three', 'four', 'five' ];

foreach(
$array as $value ){
    if(
$value == 'three' ){
        echo
"Number three was found!";
        break;
    }
}

?>
up
36
John
7 years ago
WARNING: Looping through "values by reference" for "extra performance" is an old myth. It's actually WORSE!

<?php

function one($arr) {
    foreach(
$arr as $val) { // Normal Variable
       
echo $val;
    }
}

function
two($arr) {
    foreach(
$arr as &$val) { // Reference To Value
       
echo $val;
    }
}

$a = array( 'a', 'b', 'c' );
one($a);
two($a);

?>

Which do you think is faster?

Lots of people think the answer is two() because it uses "reference to value, which it doesn't have to copy each value when it loops".

Well, that's totally wrong!

Here's what actually happens:

* one():

- This function takes an array as argument ($arr).
- The array function argument itself isn't passed by reference, so the function knows it isn't allowed to modify the original at all.
- Then the foreach loop happens. The array itself wasn't passed by reference to the function, so PHP knows that it isn't allowed to modify the outside array, so it therefore makes a copy of the array's internal iteration offset state (that's just a simple number which says which item you are currently at during things like foreach()), which costs almost no performance or memory at all since it's just a small number.
- Next, it uses that copied iteration offset to loop through all key/value pairs of the array (ie 0th key, 1st key, 2nd key, etc...). And the value at the current offset (a PHP "zval") is assigned to a variable called $val.
- Does $val make a COPY of the value? That's what MANY people think. But the answer is NO. It DOESN'T. It re-uses the existing value in memory. With zero performance cost. It's called "copy-on-write" and means that PHP doesn't make any copies unless you try to MODIFY the value.
- If you try to MODIFY $val, THEN it will allocate a NEW zval in memory and store $val there instead (but it still won't modify the original array, so you can rest assured).

Alright, so what's the second version doing? The beloved "iterate values by reference"?

* two():

- This function takes an array as argument ($arr).
- The array function argument itself isn't passed by reference, so the function knows it isn't allowed to modify the original at all.
- Then the foreach loop happens. The array itself wasn't passed by reference to the function, so PHP knows that it isn't allowed to modify the outside array.
- But it also sees that you want to look at all VALUES by reference (&$val), so PHP says "Uh oh, this is dangerous. If we just give them references to the original array's values, and they assign some new value to their reference, they would destroy the original array which they aren't allowed to touch!".
- So PHP makes a FULL COPY of the ENTIRE array and ALL VALUES before it starts iterating. YIKES!

Therefore: STOP using the old, mythological "&$val" iteration method! It's almost always BAD! With worse performance, and risks of bugs and quirks as is demonstrated in the manual.

You can always manually write array assignments explicitly, without references, like this:

<?php

$a
= array(1, 2, 3);
foreach(
$a as $key => $val) {
  
$a[$key] = $val * 10;
}
// $a is now [10, 20, 30]

?>

The main lesson is this: DON'T blindly iterate through values by reference! Telling PHP that you want direct references will force PHP to need to copy the WHOLE array to protect its original values! So instead, just loop normally and trust the fact that PHP *is* actually smart enough to never copy your original array's values! PHP uses "copy-on-write", which means that attempting to assign something new to $val is the ONLY thing that causes a copying, and only of that SINGLE element! :-) But you never do that anyway, when iterating without reference. If you ever want to modify something, you use the "$a[$key] = 123;" method of updating the value.

Enjoy and good luck with your code! :-)
up
53
tedivm at tedivm dot com
15 years ago
foreach and the while/list/each methods are not completely identical, and there are occasions where one way is beneficial over the other.

<?php
$arr
= array(1,2,3,4,5,6,7,8,9);

foreach(
$arr as $key=>$value)
{
    unset(
$arr[$key + 1]);
    echo
$value . PHP_EOL;
}
?>
Output:
1 2 3 4 5 6 7 8 9

<?php
$arr
= array(1,2,3,4,5,6,7,8,9);

while (list(
$key, $value) = each($arr))
{
    unset(
$arr[$key + 1]);
    echo
$value . PHP_EOL;
}
?>
Output:
1 3 5 7 9


[EDIT BY danbrown AT php DOT net: Contains a typofix by (scissor AT phplabs DOT pl) on 30-JAN-2009.]
up
27
Fred
9 years ago
If you want to use the list for multidimension arrays, you can nest several lists:

<?php
$array
= [
    [
1, 2, array(3, 4)],
    [
3, 4, array(5, 6)],
];

foreach (
$array as list($a, $b, list($c, $d))) {
    echo
"A: $a; B: $b; C: $c; D: $d;<br>";
};
?>

Will output:
A: 1; B: 2; C: 3; D: 4;
A: 3; B: 4; C: 5; D: 6;

And:

<?php
$array
= [
    [
1, 2, array(3, array(4, 5))],
    [
3, 4, array(5, array(6, 7))],
];

foreach (
$array as list($a, $b, list($c, list($d, $e)))) {
    echo
"A: $a; B: $b; C: $c; D: $d; E: $e;<br>";
};
Will output:
A: 1; B: 2; C: 3; D: 4; E: 5;
A: 3; B: 4; C: 5; D: 6; E: 7;
?>
up
15
mustaroad
7 years ago
in foreach if you want to iterate through a specific column in a nested arrays for example:

$arr = array(
     [1, 2, 3,   4],
     [14, 6, 7,  6],
     [10, 2 ,3 , 2],
);

when we want to iterate on the third column we can use:

foreach( $arr as list( , , $a)) {
    echo "$a\n";
}

this will print:
3
7
3
up
21
Alastair Hole
9 years ago
What happened to this note:
"Unless the array is referenced, foreach operates on a copy of the specified array and not the array itself. foreach has some side effects on the array pointer. Don't rely on the array pointer during or after the foreach without resetting it."

Is this no longer the case?
It seems only to remain in the Serbian documentation: http://php.net/manual/sr/control-structures.foreach.php
up
20
Oleg englishman at bigmir dot net
13 years ago
For those who'd like to traverse an array including just added elements (within this very foreach), here's a workaround:

<?php
$values
= array(1 => 'a', 2 => 'b', 3 => 'c');
while (list(
$key, $value) = each($values)) {
    echo
"$key => $value \r\n";
    if (
$key == 3) {
       
$values[4] = 'd';
    }
    if (
$key == 4) {
       
$values[5] = 'e';
    }
}
?>

the code above will output:

1 => a
2 => b
3 => c
4 => d
5 => e
up
0
mparsa1372 at gmail dot com
3 years ago
Examples
The following example will output the values of the given array ($colors):

<?php
$colors
= array("red", "green", "blue", "yellow");

foreach (
$colors as $value) {
  echo
"$value <br>";
}
?>
The following example will output both the keys and the values of the given array ($age):

Example
<?php
$age
= array("Peter"=>"35", "Ben"=>"37", "Joe"=>"43");

foreach(
$age as $x => $val) {
  echo
"$x = $val<br>";
}
?>
up
4
Delian Krustev
10 years ago
I want to add some inline comments to dtowell's piece of code about the iteration by reference:

<?php

$a
= array('abe','ben','cam');

foreach (
$a as $k=>&$n)
   
$n = strtoupper($n);

# At the end of this cycle the variable $n refers to the same memory as $a[2]
# So when the second "foreach" assigns a value to $n :

foreach ($a as $k=>$n) // notice NO reference here!
   
echo "$n\n";

# it is also modifying $a[2] .
# So on the three repetitions of the second "foreach" the array will look like:
# 1. ('abe','ben','abe') - assigned the value of the first element to the last element
# 2. ('abe','ben','ben') - assigned the value of the second element to the last element
# 3. ('abe','ben','ben') - assigned the value of the third element to itself

print_r($a);
?>
up
-1
peter georgiev
6 years ago
I want just to mention that John is not entirely true.

Simple field test:

$m = microtime(1); $array = range(1,1000000); foreach ($array as &$i) { $i = 4; } echo microtime(1) - $m;

Result: 0.21731400489807

$m = microtime(1); $array = range(1,1000000); foreach ($array as $k => $i) { $array[$k] = 4; } echo microtime(1) - $m;

Result: 0.51596283912659

PHP Version: PHP 5.6.30 (cli) (built: Jan 18 2017 19:47:36)

Conclusion: Working with reference, although a bit dangerous is >2 times faster. You just need to know well what are you doing.

Best of luck and happy coding all
up
-6
sebastian dot goendoer at NOSPAM dot telekom dot de
8 years ago
String keys of associative arrays, for which is_numeric() is true and which can be type-juggled to an int will be cast to an int! If the key is on the other hand a string that can be type-juggled into a float, it will stay a string. (Observed on PHP 7.0.0RC8)

<?php
$arr
= array();
$arr[0] = "zero";            // will stay an int
$arr["1"] = "one";            // will be cast to an int !
$arr["two"] = "2";            // will stay a string
$arr["3.5"] = "threeandahalf";    // will stay a string

foreach($arr as $key => $value) {
   
var_dump($key);
}
?>

The output will be

int(0)
int(1)
string(3) "two"
string(3) "3.5"
up
-9
Anonymous
9 years ago
modifying array while foreach'ing it(yeah, such slime code;-)
if elements were added on last iteration or into array with 1 element, then added elements wont be iterated as foreach checks for pointer before iteration cycle
so it just quit and added elements wont be treated
up
-13
nehuen
9 years ago
foreach by reference internally deleted and created a new reference in each iteration, so it is not possible to directly use this value as a variable parameter values​​, look at the following example where the problem is observed and a possible solution:

<?php
class test
{
    private
$a = false;
    private
$r = null;
    public function
show(&$v)
    {
        if(!
$this->a)
        {
           
$this->a = true;
           
$this->r = &$v;
        }
       
var_dump($this->r);
    }
    public function
reset()
    {
       
$this->a = false;   
    }
}

$t = new test();

$a = array(array(1,2),array(3,4),array(5,6));
foreach(
$a as &$p)
   
$t->show($p);
   
/* Output obtain:
    array (size=2)
      0 => int 1
      1 => int 2
    array (size=2)
      0 => int 1
      1 => int 2
    array (size=2)
      0 => int 1
      1 => int 2
*/
 
 
$t->reset();
  foreach(
$a as $p)
  {
   
$b = &$p;
   
$t->show($b);
  }
 
/* Output obtain:
    array (size=2)
      0 => int 1
      1 => int 2
    array (size=2)
      0 => int 3
      1 => int 4
    array (size=2)
      0 => int 5
      1 => int 6
*/
up
-2
me
3 years ago
It is not documented, but when modifying the array within foreach:
PHP seems to create a snapshot, or a copy of the entire array ("copy on write"?) when it starts the foreach loop, so changes on the iterated array in the loop have no effect on the started loop.

$a = [1,2,3];

foreach ($a as $key => $value) {
    if($value == 1) {
        $a[3] = 1;
        $a[1] = 999999;
        unset($a[0]);
        echo "Inner loop start: \n";
        foreach ($a as $key2 => $value2) {
            echo "$key2 => $value2";
            echo "\n";
        }
        echo "Inner loop end \n";
    }
    echo "$key => $value";
    echo "\n";
}

echo "Next iteration: \n";

foreach ($a as $key => $value) {
    echo "$key => $value";
    echo "\n";
}

Result:

Inner loop start:
1 => 999999
2 => 3
3 => 1
Inner loop end
0 => 1
1 => 2
2 => 3
Next iteration:
1 => 999999
2 => 3
3 => 1
up
-11
ahmad dot mayahi at gmail dot com
6 years ago
foreach retains the state of internal defined variable:

<?php
/**
Result for this array is:
Hello World
Hello World
Hello World
*/
$arr = ["a", "b", "c"];
$title = "";
foreach (
$arr as $r) {
    if (
$r == "a") {
        
$title = "Hello World";  
    }
    echo
$title."<br>";
}
?>

in this case, all we need to do is to add an else statement:
<?php
$arr
= ["a", "b", "c"];
$title = "";
/**
This prints:
Hello World
*/
foreach ($arr as $r) {
    if (
$r == "a") {
        
$title = "Hello World";  
    } else {
       
$title = "";
    }
    echo
$title."<br>";
}
?>
up
-4
M H S
3 years ago
<?php

$arr
= ["one" => 1, "two" => 2];
$arr2 = [];

foreach (
$arr as $key => $value) {
    foreach (
$arr as $key2 => $value2) {
        if (
$arr[$key] == $value2) continue; else $arr2[$key2] = $value;
    }
}

echo
"<pre>";
print_r ($arr2 !== $arr ? $arr2 : false);
echo
"</pre>";

?>
up
-30
nobody at nobody dot com
12 years ago
<?php
$d3
= array('a'=>array('b'=>'c'));
foreach(
$d3['a'] as &$v4){}
foreach(
$d3 as $v4){}
var_dump($d3);
?>
will get something look like this:
array(1) {
  ["a"]=>
  array(1) {
    ["b"]=>
    &array(1) {
      ["b"]=>
      *RECURSION*
    }
  }
}
then you try to walk some data with this array.
the script run out of memory and connect reset by peer

the document says:
Warning
Reference of a $value and the last array element remain even after the foreach loop. It is recommended to destroy it by unset().

so what I learn is that NEVER ignore """Warning""" in document....
up
-20
pnc at balintx dot me
8 years ago
Just a simple strange behavior I have ran into:

If you accidentally put a semicolon after the foreach statement, you get no errors, but the loop will only run on the last element of the array:
<?php
$array
= array(1,2,3);
foreach (
$array as $key);
{
    echo
$key;
}
// output: 3
?>

Correctly:
<?php
$array
= array(1,2,3);
foreach (
$array as $key)
{
    echo
$key;
}
// output: 123
?>

It took me a while to find that semicolon.
up
-8
dan
4 years ago
Having to unset the reference manually completely destroys the practicality of using a referenced variable.

If you make the small mistake of forgetting/deleting the unset line your code might silently mix data, the risk is too high for little gain.

If you need to reassign the value, it is way better to just use:
<?php
$array
[$key] = $newvalue;
?>
up
-44
Ashus
10 years ago
If you wondered how to create a list of all possible combinations of variable amount of arrays (multiple foreach), you might use this:

<?php

$a
[0] = array('a1','a2');
$a[1] = array('b1','b2','b3');
$a[2] = array('c1','c2');

function
getAllCombinations($a,$i,$s)
    {
    foreach (
$a[$i] as $v)
        {
        if (!isset(
$a[$i+1]))
            {
            echo
$s.$v."\n";
            } else {
           
getAllCombinations($a,$i+1,$s.$v);
            }
        }
    return
$s;
    }

echo
getAllCombinations($a,0,'');

?>

the result:

a1b1c1
a1b1c2
a1b2c1
a1b2c2
a1b3c1
a1b3c2
a2b1c1
a2b1c2
a2b2c1
a2b2c2
a2b3c1
a2b3c2
up
-27
liam666 at donnelly-house dot net
9 years ago
This is a decent, simple, and easy way to reference other values of an associative array when using foreach. (effective "next", "prev", etc.)
The only care that needs to be taken is if the array is HUGE in size, so you don't run into memory use problems. (and potential speed issues)

This example uses the 'primary' array, $aPublishSeq, which is ksort-ed to put the array in order according to the associative keys. The array is then copied using a foreach loop to make a duplicate array where the key and value order correspond to the first array, but the keys are sequential numeric starting at zero.

ksort ($aPublishSeq, SORT_STRING);     // put them all in the right order keeping array keys
foreach ($aPublishSeq as $aValue)
   $aPublishIdx[] = $aValue;          // duplicate array using corresponding sequential numeric keys

Now, in the usage foreach loop, an index variable is used to keep in sync with the associative array.

$PubIdx = -1;     // start at -1 to start at 0 below

foreach ($aPublishSeq as $sKey => $sValue) {

      ++$PubIdx;     // index into $aPublishIdx array of corresponding element in $aPublishSeq array (for "next" element check, etc.)

   echo $aPublishIdx[$PubIdx  - 1]     // previous array value
   echo $aPublishIdx[$PubIdx]          // current array value
   echo $aPublishIdx[$PubIdx  + 1]     // next array value

....

It's simple, but it works, and without much muss or fuss.
up
-14
luqh555 at gmail dot com
4 years ago
Here is an example of how to print a 2 dimension array.

$agenda =array("fulanito"=> array("nombre" =>"Gsancho" ,
                                          "direccion" => "sierra olvira" ,
                                           "fuerza"   => "Over 9000") ,
                      "jonki" => array("nombre" => "jonki",
                                          "direccion" => "valdemin",
                                           "fuerza" => "0"));
      
      
      
     foreach($agenda as $clave_agenda =>$persona){
        
         echo "$clave_agenda ";
        
        foreach($persona as $clave_agenda2 => $datos){
           
            echo "$clave_agenda2 : $datos <br>";
           
     }
up
-53
Voitcus at wp dot pl
12 years ago
You can even iterate through "dynamic" arrays that do not physically exist, but are objects that implement Iterator interface. They don't need to be stored in memory when foreach starts.

Consider the array that contains some values (I called it $allValues in the example below) and we want to have only some of them (eg. the ones that are dividable by 2). I create an object that would serve as dynamic array, that means it would "dynamically update" its values together with $allValues. The main advantage is that I store only one array, and it's the only array I serialize.

An object of MyIter class will not contain any values itself:
<?php
class MyIter implements Iterator { // you can implement ArrayAccess and Countable interfaces too, this will make class MyIter behave like a "real" array
 
private $position = 0; // an internal position of the current element
  // please note that $position has nothing common with $allValues!

 
private function getTable(){ // prepare a temporary "static" table of all objects in the class
   
global $allValues;
   
$result=array(); // temporary variable
   
foreach($allValues as $obj){
      if(
$obj % 2 == 0) // check if the value is even
       
$result[]=$obj; // if yes, I want it
     
}
    return
$result;
  }   

 
// the all below declared methods are public and belong to the Iterator interface
 
function rewind() { // a method to start iterating
   
$this->position = 0; // just move to the beginning
 
}

  function
current() { // retrieves the current element
   
$table=$this->getTable(); // let us prepare a table
   
return $table[$this->position]; // and return the current element
 
}

  function
key() { // retrieves the current element's key
   
return $this->position; // this is used by foreach(... as $key=>$value), not important here
 
}

  function
next() { // move to next element
   
++$this->position;
  }

  function
valid() { // check if the current element is valid (ie. if it exists)
   
return array_key_exists($this->position, $this->getTable());
  }
}
// end of class

// now prepare the array of 12 elements
$allValues=array(0,1,2,3,4,5,6,7,8,9,10,11);

//we would like to have a dynamic array of all even values
$iterator=new MyIter();

foreach(
$iterator as $value){
  echo
$value."<br />";
}
?>
This will result in:
0
2
4
6
8
10

(You may also like to see what var_dump($iterator) produces).

Another great advantage is that you can modify the main table "on-the-fly" and it has its impact. Let us modify the last foreach loop:
<?php
// ...all above shall stay as it was
foreach($iterator as $value){
  echo
$value."<br />";
  if(
$value==6){
   
$allValues=array(2,3);
    echo
"I modified source array!<br />";
  }
}
?>
This produces now:
0
2
4
6
I modified source array!

However, if you feel it is rather a catastrophic disadvantage (maybe for example, it shows the values 0, 4, and 6 which were removed when we reached 6), and wish to have a "static" array that will iterate even in modified objects, just call getTable() in rewind() method and save it in temporary (private perhaps) field. In my example getTable() is called every iteration, and it calls another foreach through $allValues, which together might be time-consuming. Consider what you need.
To Top