ldap_get_attributes

(PHP 4, PHP 5, PHP 7, PHP 8)

ldap_get_attributesLiefert die Merkmale eines Eintrags aus einem Suchergebnis

Beschreibung

ldap_get_attributes(LDAP\Connection $ldap, LDAP\ResultEntry $entry): array

Liest Merkmale und Werte eines Eintrags im Suchergebnis.

Nachdem ein bestimmter Eintrag in dem Verzeichnis lokalisiert wurde, kann mit dieser Funktion herausgefunden werden, welche Informationen für diesen Eintrag verfügbar sind. Diese Funktion würde in einer Anwendung verwendet werden, die Verzeichniseinträge "durchstöbert" und/oder wo die Struktur der Verzeichniseinträge nicht bekannt ist. In vielen Anwendungen wird nach einem bestimmten Merkmal gesucht, z. B. einer E-Mail-Adresse oder einem Nachnamen, und welche anderen Daten verfügbar sind, interessiert nicht.

return_value["count"] = Anzahl der Merkmale des Eintrags
return_value[0] = das erste Merkmal
return_value[n] = das n-te Merkmal

return_value["merkmal"]["count"] = Anzahl der Werte des Merkmals
return_value["merkmal"][0] = der erste Wert des Merkmals
return_value["merkmal"][i] = der i+1-te Wert des Merkmals

Parameter-Liste

ldap

Eine LDAP\ConnectionInstanz, die von ldap_connect() zurückgegeben wurde.

entry

Eine LDAP\ResultEntry-Instanz

Rückgabewerte

Gibt im Erfolgfall die vollständige Eintragsinformation in einem mehrdimensionalen Array zurück.

Changelog

Version Beschreibung
8.1.0 Der Parameter ldap erwartet nun eine LDAP\Connection-Instanz; vorher wurde eine gültige ldap link-Ressource erwartet.
8.1.0 Der Parameter entry erwartet nun eine LDAP\ResultEntry-Instanz; vorher wurde eine gültige ldap result entry-Ressource erwartet.

Beispiele

Beispiel #1 Anzeigen der Liste der Merkmale für einen ausgewählten Verzeichnis-Eintrag

<?php
// $ds ist eine gültige LDAP\Connection-Instanz für einen Verzeichnis-Server

// $sr ist ein gültiges Suchergebnis eines früheren Aufrufs
// einer der LDAP-Verzeichnis-Suchfunktionen

$entry = ldap_first_entry($ds, $sr);

$attrs = ldap_get_attributes($ds, $entry);

echo
$attrs["count"] . " Merkmale für diesen Eintrag:<p>";

for (
$i=0; $i < $attrs["count"]; $i++) {
echo
$attrs[$i] . "<br />";
}
?>

Siehe auch

add a note add a note

User Contributed Notes 6 notes

up
4
kop at meme dot com
20 years ago
It's good practice to use array_change_key_case() on the result of ldap_get_attributes() so your program can ignore case in attribute names just like ldap itself does.  (You wouldn't want ldap_get_attributes to _always_ flatten the case because you need a way to get the attribute names in a pretty format for display to the user.)
up
1
allie at pajunas dot com
21 years ago
The array created by this function is similar to the on from ldap_get_entries() but when it creates array keys it alters the attribute's case inconsistently. 

ldap_get_entries() lowercases all of the attributes before keying the array with them, but this function appears to leave things as they are.

If you're having problems, do a print_r and make sure you're using correct case for array keys.  For example, you might need to use "objectClass" and not "objectclass".
up
0
software at inebria dot com
22 years ago
As of PHP 4.0.5, the ldap_get_attributes function does not work with binary data.  If you're fetching a JPEG from an LDAP server, use ldap_get_values_len instead.
up
-2
php dot net at hiddemann dot org
19 years ago
Note that ldap_get_attributes fetches attributes AND values from the LDAP server. Depending on the data stored in the entry, the following code might work a dozen times faster (or even better, but faster in general) than the code in Example 1:

<?php
// $ds is the link identifier for the directory

// $sr is a valid search result from a prior call to
// one of the ldap directory search calls

$entry = ldap_first_entry($ds, $sr);

$attrs = array();
$attribute = ldap_first_attribute($ds,$entry,$identifier);
while (
$attribute) {
  
$attrs[] = $attribute;
  
$attribute=ldap_next_attribute($ds,$entry,$identifier);
}

echo
count($attrs) . " attributes held for this entry:<p>";

for (
$i=0; $i<count($attrs); $i++) {
   echo
$attrs[$i] . "<br />";
}
?>

You may want to check the time difference with the function "microtime".
up
-1
Snezko Snezak
17 years ago
Code and function to extract all attributes from all entryes in a certain DN. Maybe not the most timewise efficient but it works.

$entry = ldap_first_entry($ds, $sr);
write_attr($entry,$ds);
for ($i = 0; $i < $n_entries; $i++){
   $entry = ldap_next_entry($ds, $entry);
   write_attr($entry,$ds);
}

function write_attr($entry,$ds){
   $attrs = ldap_get_attributes ($ds, $entry);
   for ($j = 0; $j < $attrs["count"]; $j++){
      $attr_name = $attrs[$j];
      $attrs["$attr_name"]["count"] . "\n";
      for ($k = 0; $k < $attrs["$attr_name"]["count"]; $k++) {
             echo ">>>>>>";
             echo $attr_name.": ".$attrs["$attr_name"][$k]."\n";
      }
   }
}
up
-2
dunc at rumbletum dot org
16 years ago
I spent quite a while scratching my head about how to read operational attributes such as create and modify timestamps.

This function solved it....

function get_entry_system_attrs( $ds, $dn, $deref=LDAP_DEREF_NEVER )
{
   $conn = $ds;
   $attrs = array( 'creatorsname', 'createtimestamp', 'modifiersname',
         'structuralObjectClass', 'entryUUID',  'modifytimestamp',
         'subschemaSubentry', 'hasSubordinates', '+' );
   $search = @ldap_read( $conn, $dn, '(objectClass=*)', $attrs, 0, 0, 0, $deref );
   if( ! $search )
      return false;
   $entry = ldap_first_entry( $conn, $search );
   if( ! $entry)
       return false;
   $attrs = ldap_get_attributes( $conn, $entry );
   if( ! $attrs )
      return false;
   if( ! isset( $attrs['count'] ) )
      return false;
   $count = $attrs['count'];
   unset( $attrs['count'] );
   $return_attrs = array();
   for( $i=0; $i<$count; $i++ ) {
      $attr_name = $attrs[$i];
      unset( $attrs[$attr_name]['count'] );
      $return_attrs[$attr_name] = $attrs[$attr_name];
   }
   return $return_attrs;
}
To Top